SoG Grow Room Discussion

SOG

SOG

Well-Known Member
sparat1k said:
Are you gonna use the 3/8" silcon piping to connect them or something else?
Click to expand...
i'm going to use 3/8" silicon piping just for the RO system up to the main res everything else, air pump etc... will be same type piping @1/4"
 
AeroKing

AeroKing

Well-Known Member
SOG said:
you got me doubting now, going to look into the panda durability issue

saw the puzzle mats in white, they are a special order
and way more expensive ($18 for six pieces, click the image posted above)
Click to expand...
Hey SOG, don't know if you made a decision on this, yet, but I've got an idea.

You can get EPDM rubber roofing material that is white on one side.

It is thick, durable, waterproof, UV resistant and can be permanently seemed easily with specially made adhesive.

I know you said water won't be an issue, but I'd bet my stash that you will spill something at some point, and having solid-surface flooring will make this easier to deal with. It would also make it easier to clean as you could deck-brush and mop it.

It'll cost more than panda plastic, but probably cheaper than those white panels and it will last forever. I'd glue it to the panels for a permanent installation.
 
SOG

SOG

Well-Known Member
AeroKing said:
Hey SOG, don't know if you made a decision on this, yet, but I've got an idea.

You can get EPDM rubber roofing material that is white on one side.

It is thick, durable, waterproof, UV resistant and can be permanently seemed easily with specially made adhesive.
Click to expand...
Thanks AeroKing, looking into EPDM
i meant spills from my res operation,
pretty sure ill spill everywhere ;-)
 
SOG

SOG

Well-Known Member
just checked the prices, 1/2" thickness material is crazy expensive
even going with 1/16 or 1/8 is very expensive
i need to cover 25'x15' area

excellent solution tough for smaller area!
 
epixbud

epixbud

Well-Known Member
you know, you could use something like spray on Truck Bed Liner...... just a thought.... big time durrable and not that much coin........ just an idea, i thought of using it...
 
Picasso345

Picasso345

Well-Known Member
SOG, have you talked about your plan for the tents? Are you cloning and vegging in the DR240 and putting the flowering units in the DR300? Are you fixing to keep the res' outside the tents?
 
SOG

SOG

Well-Known Member
Picasso345 said:
SOG, have you talked about your plan for the tents? Are you cloning and vegging in the DR240 and putting the flowering units in the DR300? Are you fixing to keep the res' outside the tents?
Click to expand...
that's exactly my intentions
the DR240 will split down the middle
Mothers & clones on one side
and vegetative in the other

the DR300 will be all for flowering

my res will be outside the tents in what i refer to as the general area
this area will be enclosed "white room"
 
Picasso345

Picasso345

Well-Known Member
SOG said:
that's exactly my intentions
the DR240 will split down the middle
Mothers & clones on one side
and vegetative in the other

the DR300 will be all for flowering

my res will be outside the tents in what i refer to as the general area
this area will be enclosed "white room"
Click to expand...

Thanks. My spare bedroom is just a tad too small on one side for the DR300 so I'm going to try and flower in DR240 - (7'-10" x 7'-10" for those unfamiliar). Hopefully it will be enough room.
 
SOG

SOG

Well-Known Member
Picasso345 said:
Thanks. My spare bedroom is just a tad too small on one side for the DR300 so I'm going to try and flower in DR240 - (7'-10" x 7'-10" for those unfamiliar). Hopefully it will be enough room.
Click to expand...
sweet bro, congrats
i haven't installed mine yet,
i have seen both of them in person and they are huge for grow tents,
in fact the 300 is a bit overwhelming in size when you see it all put together
the 240 looks perfect in size, i think it all comes down to how much you cramp things in there,
 
Shrike

Shrike

Well-Known Member
Hey SoG...Hope you'll grace us with lot's of pic's once you get the tents up and start installing the equipment. I haven't seen these tents in action, and I'd love to see how well the lights hang, the vents work and in general how well everything fits and works in there . It will be great to see how accessible everything inside is with the setup your planning. I can't wait to see six SoG modified StinkBud Turbocharged aero/nft models blooming like crazy! I'm planning a similar setup later this year and you will be the guiding star for many of us...

SOG said:
sweet bro, congrats
i haven't installed mine yet,
i have seen both of them in person and they are huge for grow tents,
in fact the 300 is a bit overwhelming in size when you see it all put together
the 240 looks perfect in size, i think it all comes down to how much you cramp things in there,
Click to expand...
 
Shrike

Shrike

Well-Known Member
Your equipment list makes me salivate like a junk yard dog for a big ham bone!:lol: You really are doing this all the way I'm sure a lot of us wish we could. Your subject await your next pic postings...;-)

SOG said:
Equipment list

DR300 9 x 9 x 7 Grow Tent by Secret Jardin
DR240 - 7'10" x 7'10" x 6'7" Grow Tent - by Secret Jardin

IntelliClimate Intelligent Growroom Climate Controller by Autogrow Systems
IntelliClimate CO2 Sensor by Autogrow Systems
IntelliDose Intelligent Hydroponic Doser by Autogrow Systems

Silver White Lightite Sheet 100ft x 4ft - by Easy Grow

Big Blue 12" Ozone Gen. 5 x UV bulbs - by Blue Air Products

48 Gallon Stand-Up Reservoir

Tall Blue - by Hydro-Logic
Merlin GP - by Hydro-Logic
FlowMaster Flow Meter - by Hydro-Logic
Inline TDS Monitor for Merlin GP - by Hydro-Logic

iGS-070 Manual Plug-in Variable Speed Control - by Plug N Grow

MDT-1 Master Digital Timer - by Sentinel
PXM-1 (15 amp@120vac Trigger, Nema 5-15 receptacles ) - by Sentinel
PXM-2 (15 amp@240vac Trigger, Nema 6-15 receptacles ) - by Sentinel
HPH-4 (30 amp@240vac Trigger, Nema 6-15 & 5-15 receptacles ) - by Sentinel
CO2-REG CO2 Regulator - by Sentinel

Adjust-A-Wing Large reflector - by Adjust-A-Wing
Adjust-A-Wing Large Super Spreader - by Adjust-A-Wing
Sun Tube 8” Reflector - by Sunlight Supply
T5 4FT Fluorescent Strip Light - by Sun Blaze
T5 28 System - 2' x 8 Bulbs - by New Wave

1000w 240v Digital Ballast by Lumatek
LU1000B/HTL/EN Hortilux Super HPS EN 145,000 Lumens by Hortilux
LU1000MH/HTL/EN Hortilux BLUE 80,000 Lumens by Hortilux
T5 HO Florescent 2' 6500k (Blue) - by Sylvania
Pentron Green T5 HO 4' - by Sylvania

Max-Fan 8" Inline Fan - by Can-Fan
Max-Fan 10" Inline Fan - by Can-Fan

8" Normally Closed Damper - by ZoneMaster
10" Normally Closed Damper - by ZoneMaster

633 Submersible Pump - by ECO Plus
396 Submersible Pump - by ECO Plus
ECO Air 4 - Four Outlets variable control - by ECO Plus
ECO Air 8 - Eight Outlets variable control - by ECO Plus
Click to expand...
 
You must log in or register to reply here.
Top