SoG Grow Room Discussion

DubB83

DubB83

Well-Known Member
SOG said:
that's a simple fix,
you can use rep if you change your skin to blazin07
or use the default site skin which is what i use and able to leave rep with
they have several skins which they simply didn't update all them
with the function's they introduced over time
they only updated few skins,
that's why you get some function showing up only under curtain skins
again this comes to show you how well they manage the site
Click to expand...
I use the 07 skin always, I don't even know what the new one looks like!

I cannot -rep, I can +rep though.
 
dagobaker

dagobaker

Well-Known Member
please let us know where ur are going...........
im on a few other sites but sometimes people on this site get shitty so i keep it to myself
 
sparat1k

sparat1k

Well-Known Member
8 billions hits a day!?! you must be doing well financially:clap:

Cheers to you SOG, if you leave... let us know. This is a A+ thread bro!
 
SOG

SOG

Well-Known Member
finally... heard back from Rollitup himself not long ago :clap::clap::clap:
was assured the issues will be addressed first thing Monday morning

Thanks guys for all the help and support :hug::hug::hug:
 
sparat1k

sparat1k

Well-Known Member
SOG said:
finally... heard back from Rollitup himself not long ago :clap::clap::clap:
was assured the issues will be addressed first thing Monday morning

Thanks guys for all the help and support :hug::hug::hug:
Click to expand...
good stuff, if all goes well i plan on going elite in a few months too :mrgreen:
 
Shrike

Shrike

Well-Known Member
A couple of questions for you about your version 1.2 plans. First, what is being measured in the bottom left drawing. There is a measurement all the way to the left, but it has no number measurement in it and I don't know what it is measuring. Also, when cutting the angle down on the res. end of the posts, it looks like you start the cut at about 2.5 inches down from the top and end it at 1 inch from the bottom at the end. Is that about right?
 
SOG

SOG

Well-Known Member
Shrike said:
A couple of questions for you about your version 1.2 plans. First, what is being measured in the bottom left drawing. There is a measurement all the way to the left, but it has no number measurement in it and I don't know what it is measuring. Also, when cutting the angle down on the res. end of the posts, it looks like you start the cut at about 2.5 inches down from the top and end it at 1 inch from the bottom at the end. Is that about right?
Click to expand...
the missing measurement on the left
is the portion of the pipe going from the pump into the main manifold
i used a flexible pipe only for this portion, the pipe can be custom fitted with a pair of scissors (check images closely)
also considering a second pump as a backup
running either both at the same time
or as was suggested by LionsRoar,
each will go on every 10/1
not decided yet

as for the angle cutting on the post
you are correct, i go about 2 1/2" from the top
i just placed a 1/2" pipe tip at the end, then made the line to the top of it
the angle has no significance, the only thing you need to be sure is
to go down about 2 1/4 - 2 1/2", as this will allow the lid to properly lock in place,
(the lid can also be placed upside down for extra head room if needed,
i preferred to have the lid locked in place)
the end angle has no significance what so ever
you can go straight through or angle it any way you like
as long as you keep the required distance from the top you will be good to do

another thing i didn't place in the drawings;
the area to cut the holes in the box itself
this part needs to be done carefully
as there is no way of exactly measuring the holes placement
it will have to be a custom fittings
here's what i did,
after i made my cage; place the fence tubes in place
(very important, use the support beams in place when measuring)
and place the end flush to the box, from the inside of the post
mark your bottom and where the sides will align (don't worry about the rest now)
once you got your bottom line marked, take a small piece of tube
and mark the rest all the way to the top from the outside
use a Dremel or similar, to cut off the box
remember you want to utilize as much highest as possible
you want to end up at exactly 1/8" from the top ledge,
(without lid on) that's your highest point
work your way carefully to custom fit the tubes in
its not as hard as it sounds once you actually go through the process
my pointers will make more sense to you

good luck with the build
 
Shrike

Shrike

Well-Known Member
SoG...thanks for filling out the picture of how you finished up the flowering unit. The info is very helpful. Thanks for the material calc., also. You and Stink are generous people and it's nice to know you guys on this board.

So, what's your next step? Have you put the tents up yet and arranged anything in them? Keep us informed...it's fun watching this...
 
KushCanuck

KushCanuck

Well-Known Member
My mouth's been watering waiting for some of the puzzle to come together, you are set for a great grow, just itching for your start date SOG. Best of luck as always brother, Peace and Love

KC :leaf:
 
genfranco

genfranco

Well-Known Member
SOG said:
lol,
8 systems pre-cut and ready to be put together ;-)
Click to expand...
The pics are what keep me coming back man!....LOL.. Its just so pretty to see so much ready to go.

Great job man... shit you might want to start selling those "Aero Kits".... blow all these fuckers out of the water as far as prices!

Better hurry though cause i can smell someone doing that sooner than later on ebay ;-)
 
Shrike

Shrike

Well-Known Member
Now that's a lego set I'd love to play with! So, your going with eight flowering units in the DR300. Is that correct? Or is that for clone and veg also? Have you updated your floor layout schematics yet? I'd love to see the latest version of those.

Love the eye candy...:lol:
 
You must log in or register to reply here.
Top