BHO with Vacuum oil/wax tutorial
- Thread starter Guzias1
- Start date
zpfunk
Active Member
I usually get a more green color from ground up material as apposed to the lighter golds i get from unground lightly packed material(as when i pack my material in with a pole or hanger type wire of some sort, i use kind of a stir and pack method until what i put in, is half the size it was and continue until my tube is fully packed, but if you look closely you can see the material isnt crumbled and crushed, just broken into smaller pieces)...
zpfunk
Active Member
I can get power 5 for 25$us a case, if its legal and less expensive i wouldnt have a problem middle manning for you
zpfunk
Active Member
I didnt expect to come back and everything to be so alive!! Fuck yeah! A moment of silence for VP 
He was like the "Butters" of the group he will be missed... *moment of silence* I been kicking around some inventions to blast indoors, i'll probably post them up on here and see what we can come up with. I experimented with light dimmers and reptile pads, but i didnt realize my batteries in my IR therm were bad so my temps were off about 20+ degrees. didnt figure that out until i returned to different sized mats to petsmart (ooooooh i get it, Pet Smart...Petsmart...duuuuumb *ahem* anyway... yeah >_<
pretty much dont know what im talking about just feeling left out of the convo so...
I usually blast into a round pyrex glass pie pan... makes it so i can scrape 99% of the wax as the "corners" have a better transition, does anyone else do this?
Umm...
I like to let my crumble get that Moon rock look, i love taking a piece of moon rock and rolling it into a string tossing it in a rolling paper adding enough tobacco to make it burn nice and even throw a crutch on the end and space travel... when i cant dab or my pen isnt charged that is... or pretty much any excuse i get.
(excuse my shitty camera)
He was like the "Butters" of the group he will be missed... *moment of silence* I been kicking around some inventions to blast indoors, i'll probably post them up on here and see what we can come up with. I experimented with light dimmers and reptile pads, but i didnt realize my batteries in my IR therm were bad so my temps were off about 20+ degrees. didnt figure that out until i returned to different sized mats to petsmart (ooooooh i get it, Pet Smart...Petsmart...duuuuumb *ahem* anyway... yeah >_< pretty much dont know what im talking about just feeling left out of the convo so...
I usually blast into a round pyrex glass pie pan... makes it so i can scrape 99% of the wax as the "corners" have a better transition, does anyone else do this?
Umm...
I like to let my crumble get that Moon rock look, i love taking a piece of moon rock and rolling it into a string tossing it in a rolling paper adding enough tobacco to make it burn nice and even throw a crutch on the end and space travel... when i cant dab or my pen isnt charged that is... or pretty much any excuse i get.
(excuse my shitty camera)
Sprinkle in some flowers instead!
Guzias1
Well-Known Member
zpfunk.. dayum.. you were around for like a second, now you back for a second. helloooo again. niceeee moon rocks. whats strains?
midnitetoak
Active Member
Yeah honey oil sure is addicting.....it's taking all I got to not turn my remaining stash into shatter. Can't wait til I have some fresh trim/buds to run. I revegged same strains back out so I will have quality material to work with in about 8 weeks or so
garlictrain
Well-Known Member
Hey everyone I've been frolicking in the magical world of BHO since dissecting this thread and putting the old noggin to use...
My last post here was of some winterized oil...
Here's the last batch...
Blasted 4x 100g tubes into a single pyrex, then hot h2o bath until able to whip and put on heat source...
Really slowing the bubbling so safe to bring inside...
Here is something I'm very excited to share with all of you! Bought a 5 piece stainless pick set at HF for $5! There is a perfect dabber and also a scythe looking pick tool that I bent to a 45' angle and can easily chuck into my power drill!
Never again will I be hand whipping!
I'm purging on an electric griddle with a deep dish lasagna pan filled with rice!
Can easily keep a consistent 120'-130'f!
So I whipped, let sit for 1hr, whipped again, one more hr, then scraped everything into the center before heading to bed.
34g oil from 400g smalls...
Also some pictures of bubble hash I made!
Now I know this is a long post but there is so much info to share!
My friend has been running all my machined trim and is only getting goo its not waxing, interesting. Though it does shatter at room temp, whew!
Also no matter if it's trim or bud I always can fit approx 100g in each tube!
The only difference is yield! the quality is always the same, color and consistency given the quality of starting material.
How is my loading process different from what I've seen here?
1. All material is frozen before hand, including cans of tane in the freezer overnight.
2. I use stainless steel screens not sure the micron but have never had contaminate pull through the screens.
3. I use a cheapo food chopper to get my buds/trim as small as possible so I can pack that tube to its capacity!
****Note this is a make or break for most folks and can be where a lot of people get the green tinge! The secret key is DRY ICE!!!!! SHHHHHHH!!!!!!!!!***
4. Once all the tubes are fully packed I go an medicate to get ready the forearm workout (eventually will build a sick tube holder...)
The rest is history and you guys know it better than I but I promise I'm studying hard!
Thanks for everyone's input and happy dabbing !
GT
My last post here was of some winterized oil...
Here's the last batch...
Blasted 4x 100g tubes into a single pyrex, then hot h2o bath until able to whip and put on heat source...
Really slowing the bubbling so safe to bring inside...
Here is something I'm very excited to share with all of you! Bought a 5 piece stainless pick set at HF for $5! There is a perfect dabber and also a scythe looking pick tool that I bent to a 45' angle and can easily chuck into my power drill!
Never again will I be hand whipping!
I'm purging on an electric griddle with a deep dish lasagna pan filled with rice!
Can easily keep a consistent 120'-130'f!
So I whipped, let sit for 1hr, whipped again, one more hr, then scraped everything into the center before heading to bed.
34g oil from 400g smalls...
Also some pictures of bubble hash I made!
Now I know this is a long post but there is so much info to share!
My friend has been running all my machined trim and is only getting goo its not waxing, interesting. Though it does shatter at room temp, whew!
Also no matter if it's trim or bud I always can fit approx 100g in each tube!
The only difference is yield! the quality is always the same, color and consistency given the quality of starting material.
How is my loading process different from what I've seen here?
1. All material is frozen before hand, including cans of tane in the freezer overnight.
2. I use stainless steel screens not sure the micron but have never had contaminate pull through the screens.
3. I use a cheapo food chopper to get my buds/trim as small as possible so I can pack that tube to its capacity!
****Note this is a make or break for most folks and can be where a lot of people get the green tinge! The secret key is DRY ICE!!!!! SHHHHHHH!!!!!!!!!***
4. Once all the tubes are fully packed I go an medicate to get ready the forearm workout (eventually will build a sick tube holder...)
The rest is history and you guys know it better than I but I promise I'm studying hard!
Thanks for everyone's input and happy dabbing !
GT
zpfunk
Active Member
This my friend is where im at in the forums... and im aware, a spliff is like anal sex some people wouldn't dare, some people cant get enough and all Europeans love it... its like a super mini blunt, and i can get just the perfect lvl of dosage and smoke on the job with everyone who's smokes cigarettes... not a natural transition for a non(cigarette) smoker id imagine...
zpfunk
Active Member
Those were all made from random strains, I got the various trim from someone with a mystery garden that was all unkown strains... I've had a few forever goos too, the kind that make me say "ill never do this again" but that problem stopped when I Stopped doin runs with bag shake and trim that is crappy, my rule for trim no matter how many triches. I can see with my scope is, if it doesn't stink like a gro op when I open the bag, its gonna be a waste of time...
garlictrain
Well-Known Member
Shit I got 2 cans of tane left in the freezer an my buddies suppose to be bringing a chunk of his master pack over today!
I get nervous when I drop below 8 cans in the freezer!!!
So I had some outdoor Hindu Kush comedown that looked/smelled great on the vine, true hindu shit funk...
After pulling it off the drying racks it just was not appealing in the least vs my indoor Hindu being sweetly funky not shit funky...
SO I FUCKING BLASTED THAT SHIT INTO OIL!!!
Fresh from hot h2o purge... Get mr whip shit out!
After a single pass whip..
Before bed at 120'f...
This am, check out how it flipped!
Dry dehydrated wax with a distinct GOOD Hindu scent.
I've always heard it but now fully see the fresher your material the better it flips to crumble!
Also I returned my HF single stage 2.5cfm 75 micron Vac pump cause I was gonna just stick to winterizing...
Then a buddy comes along offering a 4cfm dual stage 25 micron Vac pump for some consult work and BAMM I'm back on the Vac Purge train!!
I just picked up a piece of 1in thick 16x16 acrylic from our local everything plastics manufacturer.
Also have all my fittings so now I just gotta drill a hole in my desiccant chamber for the bulkhead and do a couple dry runs.
Thanks again everyone for sharing your knowledge and experiences!
Without everyone's input we'd never be able to weather the shit-storm of BHO shit-hype perpetuated by ignorant shit-stoners and ruthless shit-dispensary owners!
An I DO believe winterized wax to be the best thing since the Persians started using their rugs to make hash!!!
GT
I get nervous when I drop below 8 cans in the freezer!!!
So I had some outdoor Hindu Kush comedown that looked/smelled great on the vine, true hindu shit funk...
After pulling it off the drying racks it just was not appealing in the least vs my indoor Hindu being sweetly funky not shit funky...
SO I FUCKING BLASTED THAT SHIT INTO OIL!!!
Fresh from hot h2o purge... Get mr whip shit out!
After a single pass whip..
Before bed at 120'f...
This am, check out how it flipped!
Dry dehydrated wax with a distinct GOOD Hindu scent.
I've always heard it but now fully see the fresher your material the better it flips to crumble!
Also I returned my HF single stage 2.5cfm 75 micron Vac pump cause I was gonna just stick to winterizing...
Then a buddy comes along offering a 4cfm dual stage 25 micron Vac pump for some consult work and BAMM I'm back on the Vac Purge train!!
I just picked up a piece of 1in thick 16x16 acrylic from our local everything plastics manufacturer.
Also have all my fittings so now I just gotta drill a hole in my desiccant chamber for the bulkhead and do a couple dry runs.
Thanks again everyone for sharing your knowledge and experiences!
Without everyone's input we'd never be able to weather the shit-storm of BHO shit-hype perpetuated by ignorant shit-stoners and ruthless shit-dispensary owners!
An I DO believe winterized wax to be the best thing since the Persians started using their rugs to make hash!!!
GT
Bublonichronic
Well-Known Member
First time I smoked "spin" I think Is what he called it was with this British kid who swore it was the best way to smoke..anyway it was a 50/50 mix of tobacco and herb, took a fat bong rip and felt retarded for a couple minutes lol, I still prefer just weed, but the tobacco adds a extra kick for sure
) if you posted it in another thread in c&e my badHey Garlic nice lookin oil man! Looks like it's starting to wax a bit already in the pirex but it could just be the picture. I had some chemo the other day I ran for my friend that waxed really quickly before I even put it in the chamber. Should have took some pics of it. Was very stanky too.
Hey Qwiz no man not yet. Still on the racks for another 5 days or so. I do real slow cold drying like 15 days for the larger buds and about 13 days for the regular sized ones.
I love the OG it makes a really orange/amber wax
Takes a lot longer to wax up than the other strains I've ran so far though.
Hey Qwiz no man not yet. Still on the racks for another 5 days or so. I do real slow cold drying like 15 days for the larger buds and about 13 days for the regular sized ones.
I love the OG it makes a really orange/amber wax
Takes a lot longer to wax up than the other strains I've ran so far though.
garlictrain
Well-Known Member
Hey thanks Yoda it's been from gathering info here and there and applying it! I like the results of this 9 day harvested "fresh frozen" hindu wax...
Gotta keep my temp on check cause I don't wanna goo it! Man does it have a stank too! I've been dabbing winterized since I learned how and took a small pull off a crispy corner of the hindu, ok I took 2 and fucking indica POW!
Also I'm officially up an running with my vac set up! I can hit -25hg in 30 sec, which at my altitude I believe is max vac...
Gotta keep my temp on check cause I don't wanna goo it! Man does it have a stank too! I've been dabbing winterized since I learned how and took a small pull off a crispy corner of the hindu, ok I took 2 and fucking indica POW!
Also I'm officially up an running with my vac set up! I can hit -25hg in 30 sec, which at my altitude I believe is max vac...
garlictrain
Well-Known Member
I like to run it when I get really nice flowers or have special requests of certain strains that wax well and can get fresh harvest.
being a CO MMJ grower ensures I never really run out of running flowers through my tubes, I save all my sugar leaf for the hash bags...
being a CO MMJ grower ensures I never really run out of running flowers through my tubes, I save all my sugar leaf for the hash bags...