verticalgrow
Well-Known Member
Are u getting any all 3000k SOL boardsReally nice spectrum with the 3000k/4000k/660nm blend,
Are u getting any all 3000k SOL boardsReally nice spectrum with the 3000k/4000k/660nm blend,
we can make them as required, 3000k no problemAre u getting any all 3000k SOL boards
Yo! i'm going to run these boards with heatsinks at 1400ma for 196w like you said. i just cant see 196w being enough to flower a 3x3? I have 1560w of QB s6 flowering other tents at the mo so pretty familiar with those. I think i might need two of your panelsnice one, thanks for your support you are officially number 1 on the FS boards so will love you see how your diary rolls, 1 board at 1050ma will run you around 160 watts, if your running the FS on two channel then you have the option to tie the 2 channels together so you can use a single driver at 108v or parallel the strings with a 2amp driver
Cheers
Mark
yep in design at the moment, trying to get the lowest profile possible so trying a few different conceptsAre you going to carry heatsink as well for the sol skin?
Lukio good question, 320W SOL board @2100ma for 3x3 would be over 800PPFDYo! i'm going to run these boards with heatsinks at 1400ma for 196w like you said. i just cant see 196w being enough to flower a 3x3? I have 1560w of QB s6 flowering other tents at the mo so pretty familiar with those. I think i might need two of your panels
There doesn't appear to be any mention of Drivers........nice, thats for watching will have a couple more this week will be mounting a Skin between 4 cobs should be interesting
Cheers
Mark
Are you sphere testing your boards in the future?yep in design at the moment, trying to get the lowest profile possible so trying a few different concepts
Cheers
Mark
I will par map 1 and 2 boards in 3x3 next week and get some numbers up, what height are your lights to the canopy?ahhhhhhhhh really, now we're getting there! id still like 900 - 1000ppfd. im an electrics/driver/wiring amateur, it melts my brain! cheers bro!
@welight i'll have to add a heatsink to my order if poss?
cheers!
nice one cheers dude! ummm around 60cm ishhhhh... i think...I will par map 1 and 2 boards in 3x3 next week and get some numbers up, what height are your lights to the canopy?
Cheers
Mark
I really think 400 watts of samsungs in a 3x3 will fry the plant. I grow in 3x3 tents a lot and around 250 watts seems to be plenty for a 48" plant.Yo! i'm going to run these boards with heatsinks at 1400ma for 196w like you said. i just cant see 196w being enough to flower a 3x3? I have 1560w of QB s6 flowering other tents at the mo so pretty familiar with those. I think i might need two of your panels
You have plenty of head room therehey dude, these are under 520w s6 in a 3x3 - they seem pretty happy at the moView attachment 3982587
its a 15mm fisheye so it looks more...ive jus checked and the tallest is 63cm away.You have plenty of head room there
How many umoles at 63 cm?its a 15mm fisheye so it looks more...ive jus checked and the tallest is 63cm away.
no clue! i did use a flux meter and divided by 69 to work out roughly how much they were getting in the last big tent grow...i was told that workd ish? havent checked this time/yet as theyre still stretchingHow many umoles at 63 cm?
yep my bad, got a lot of data on driver options just need to get it on siteThere doesn't appear to be any mention of Drivers........
Can you give recommendation for drivers that are suitable for the Sol Skin boards?
Thanks