The French Cannoli` Hash Thread
- Thread starter subcool
- Start date
Frenchy Cannoli
Well-Known Member
Just posted a short new video with Leo Stone from Aficionado Estates
Tiger
Active Member
Hey Frenchy,
I was watching Hash Church on Sunday and Todd was talking about some guy who uses high ph water to make his water hash with. Do you do this? Have you heard of it and tried it already? If so, what are your thoughts in regards to high ph water in making hash?
thanks
Tiger
I was watching Hash Church on Sunday and Todd was talking about some guy who uses high ph water to make his water hash with. Do you do this? Have you heard of it and tried it already? If so, what are your thoughts in regards to high ph water in making hash?
thanks
Tiger
Frenchy Cannoli
Well-Known Member
He is trying to get younger.Hey it's Leo! Is he getting younger!
Say high for me
Frenchy Cannoli
Well-Known Member
I think you call that overkill. A high PH will not make a difference during the sieving process or during agitation. The resin heads do not need any help to fall by themselves
GhostShadow
Well-Known Member
abundantly trichomed material is awesome but clean trims are the key to work with even if they are old.
its something else to take a growers largely unwanted old trim and spin it into gold.
nothing like handing them a ball and knife finding it creamy white inside a chocolate outer layer.
I get a kick out of the looks on their faces when they take a nice sweet toke of what was once there forgotten old trims.
usually makes it much easier to get trims to run next time.
its something else to take a growers largely unwanted old trim and spin it into gold.
nothing like handing them a ball and knife finding it creamy white inside a chocolate outer layer.
I get a kick out of the looks on their faces when they take a nice sweet toke of what was once there forgotten old trims.
usually makes it much easier to get trims to run next time.
m4s73r
Well-Known Member
So I went looking for bubble bags. The plan was just to buy the 4 bags i needed, 190,160,45, and 25. I was going to buy the first 3 in 1 gallon, and the 25 in a 20 gallon all mesh. Put the 20 gallon in a 32 gallon trash can to dump all my water through.
I was looking at wacky willys all mesh bags for the 20, and bubble now for the 1 gallon.
The idea being ill collect each wash from the 3 1 gallons. Then after i'm done ill collect from the 25.
Are those good bags? tough, accurate microns ect.
Would the 45 flow through fast enough when dumping out of the machine? or should i look at 5 gallon bags instead?
Will the 20 gallon handle the weight of the water?
Think it would be ok to then pump that water up to the machine and use it again? I dont like to waste water if I dont have too. And a little pump is cheap.
Going this route saves money over buying whole sets. And I'm not interested in 30 dollar sets from ebay that will fall apart after a couple of uses.
I was looking at wacky willys all mesh bags for the 20, and bubble now for the 1 gallon.
The idea being ill collect each wash from the 3 1 gallons. Then after i'm done ill collect from the 25.
Are those good bags? tough, accurate microns ect.
Would the 45 flow through fast enough when dumping out of the machine? or should i look at 5 gallon bags instead?
Will the 20 gallon handle the weight of the water?
Think it would be ok to then pump that water up to the machine and use it again? I dont like to waste water if I dont have too. And a little pump is cheap.
Going this route saves money over buying whole sets. And I'm not interested in 30 dollar sets from ebay that will fall apart after a couple of uses.
Vnsmkr
Well-Known Member
Last edited:
Frenchy Cannoli
Well-Known Member
Boldtbags 5 gallons full mesh bags can be used with a 20 gallons washing machine.
DO NOT reuse the water if you do not filter all the vegetal matters tat is inside. You cannot use "dirty" water to collect clean resin.
Do not think of saving money when you make Hash especially saving money on your tools.
Frenchy Cannoli
Well-Known Member
Check www.harvestright.com for details on machine, the process is called sublimation. I am still testing the machine and in the process of writing about the experience
m4s73r
Well-Known Member
Yeah 60 bucks for 1 bag is a little much for me. Standard Bubble bags are half that at 30 with willys coming in 3rd at 25. I personally like the all mesh ones from willys, I think i could use the 1gallon ones. And at 6 bucks a peice I could always get into something else and only be out 20 bucks.
Fair enough on the water.
Im waiting to hear from Willys on how accurate their bags are. If theyre not with in 1 micron im out and ill go with Original BubbleBags.
Frenchy Cannoli
Well-Known Member
You are trying to save a few bucks on your tools, major mistake. Don't tell me that those bags are expensive when you get your money back the first time you collect resin in it. Save money anyway you can my friend but never on your tools
Mason Jar 92705
Well-Known Member
Awesome advise for all aspects of growing.
Vnsmkr
Well-Known Member
This is true in business as well. I just told a managing director if he wanted to spend more in the long run go ahead and hire the cheap labor, have seen it time and time again.
m4s73r
Well-Known Member
I get that. But at what point do we as consumers have to decide when something is a fair price or not. Im saying as a consumer 60 bucks per bag is price gouging. Not when their direct competition is 20 bucks cheaper. Then you have to consider size of the business. Do they have the ability to buy in bulk and make a profit. Or are they small time and have to charge more to cover thier overhead.
Now as a consumer i come here and see what people are using, I also go over user reviews. Complaints about things are easy to find. Like most of the bags on amazon. Lots of complaints on here and on reviews. Also those were around 30-60 for a 8 bag set.
Now I have seen a lot of good talk about Original Bubble Bags, Boldt bags, Willys bags, and another set I cant remember. Then I do a price/feature comparison and and make my choice from that.
Boldt bags were eliminated for 4 reasons, price, no single all mesh buying option, price gouge on their machine(frenchy bags @250 and machine @150 plus shipping Same machine on amazon for 99 free shipping), and incorrect sizes in their "frenchy approved set" the 160 73 and 45. When the correct bags are 190,160,45,25.
I went through their website and not one user review.
Of the 2 remaining I chose willys as they have all mesh over the Original BBags.
Now as a consumer i come here and see what people are using, I also go over user reviews. Complaints about things are easy to find. Like most of the bags on amazon. Lots of complaints on here and on reviews. Also those were around 30-60 for a 8 bag set.
Now I have seen a lot of good talk about Original Bubble Bags, Boldt bags, Willys bags, and another set I cant remember. Then I do a price/feature comparison and and make my choice from that.
Boldt bags were eliminated for 4 reasons, price, no single all mesh buying option, price gouge on their machine(frenchy bags @250 and machine @150 plus shipping Same machine on amazon for 99 free shipping), and incorrect sizes in their "frenchy approved set" the 160 73 and 45. When the correct bags are 190,160,45,25.
I went through their website and not one user review.
Of the 2 remaining I chose willys as they have all mesh over the Original BBags.
m4s73r
Well-Known Member
Man im really high, and tottally dont want that post to come off dickish? So I hope nobody takes that as anything more then me giving my running train of thought based on the information i have currently. I only pose this to see if im thinking something incorrectly.
Again Im stoned, so my apologies if I did.
PS, its some really good weed.
Again Im stoned, so my apologies if I did.
PS, its some really good weed.
Frenchy Cannoli
Well-Known Member
Hope you are happy with them