BlackMesa
Active Member
There are too many variations from one led panel to the next to give a flat answer, every panel is different and different strains have different tolerances.
IF you are new to LED and want help choosing what to buy, POST HERE!
- Thread starter SnotBoogie
- Start date
- Status
Johnsonbigs
Active Member
Hey guys, I have been researching LED's and narrowed my search down to a few lights and are looking for some input. I have a 4x4x6ft stealth box and want to grow some killer slicky. I have approx 5 yrs of grow experience but have been out of the game for 2 years because of kids and stuff.. Anyway, I am looking into these 3 lights: Apache AT600, Black Dog Platinum Xl 750w, CLW SolarStorm 880w. I am really looking for guys who have 1st hand knowledge, thank you for your help guys!
Miley T
New Member
So I looked at Bmls lights. Anyone used these? Or know of anyone who has. Looks good to me.These mofo's are pricing themselves out of most people's budgets!!................I don't get it.
well you can look at a illumitex "knock off" BML's spyder panel http://www.bmlhorticulture.com/spydr-600-grow-max-spectrum/ NOT the same umol/par #'s as the illumitex, but in a 3x3 SOG environment it should work...........still would prefer passive cooled panels in a large op, no offense to area 51 and the rest of the active cooled panels. It's just less worry(also fan failure/junction temps) when your electronics are SEALED from moisture and dust when dealing with a commercial operation(employees do dumb things).
If quality and power savings are on top of your list you may also want to look at currently the best CMH bulb http://growershouse.com/sun-system-lec-315-light-emitting-ceramic-mh-fixture-120v the 240v option is even cheaper, covers a 3x3 @ $500 a pop, highest par/umol per watt on the indoor light tech market ATM. Very low lumen depreciation(for hid), open fixture rated, etc.
Even check out indagro Induction, I'm sure daryl would give discounts on bulk .............10yr warranty is very nice on a big investment.
good luck and be safe
Myles117
Well-Known Member
no first hand but iv heard enough people talk about the black dog being less than reliable whereas the other two you listed have very good reviews from growers.
Thanks for the info man. I just picked up a bunch of the 2700k 75w replacement Cree bulbs for my first attempt at side lighting. Though now I know someone has done T5 with no venting and had success so it's still an option. I only bought enough Cree bulbs for 1 out of 3 units to see if I notice an improvement or not. The T5 would have offered a more even coverage. So it may still be the better option. I'll see how what I'm doing works first though. Either way the feedback is appreciated.
I have 4 mothers. They are about four months old and quite bushy. How many CFL's would you recommend to keep these sufficiently lit? Watts/K? I assume around 4000 K or so to keep it in the bluish spectrum?
Dragon311
Well-Known Member
I have a cabinet I use to grow a single plant at a time. I've got 6 successful CFL grows under my belt now, and want to look at upgrading equipment. I think I want to start with better lightning.
The inner dimensions of the flowering chamber are: 28"W x 20"D x 52"H.
Which Area51 would be best for this area? Would the XGS-190 be overkill? Or would I be better off with one of the RW150 or RW75?
The inner dimensions of the flowering chamber are: 28"W x 20"D x 52"H.
Which Area51 would be best for this area? Would the XGS-190 be overkill? Or would I be better off with one of the RW150 or RW75?
Abiqua
Well-Known Member
With that height, you would be perfect for the new 150 or the Xgs, just depends on what spectrum you want I guess. Both top shelf lights. The 75 might be a tad underpowered for 10 cu. ft or so........imho.
keepitlegal
Member
Hi everyone
Been a member for a good while and have lately been getting really deep into led tech. Built a cab just to play with led as im focused on hps in my main grows. Anyways im looking for a sgs160 or rw150 if anyone might have a used one for sale. My cab is 23x18x49 inner dims and i tried a chinese 480 watt led i was given and its way to much heat even with 4in can. Pretty much want the most light possible without wasted enery let me know what you guys think. Ill throw a pic of the cab up soon.
Thanks and very informative info on hear
Been a member for a good while and have lately been getting really deep into led tech. Built a cab just to play with led as im focused on hps in my main grows. Anyways im looking for a sgs160 or rw150 if anyone might have a used one for sale. My cab is 23x18x49 inner dims and i tried a chinese 480 watt led i was given and its way to much heat even with 4in can. Pretty much want the most light possible without wasted enery let me know what you guys think. Ill throw a pic of the cab up soon.
Thanks and very informative info on hear
QUESTION FOR YOU, LED-EXPERTS 
What LED-light would you recommend for growing 3-4 plants in the attic area. I have no grow-box, just free space of around 120x80x160cm which I can fence off if necessary but don`t want to add too much equipement like filters etc..
I can start first stage at the sun (through my room`s window), later on I would take them to the mentioned area where I would like to give them the best that is available at EU market for the max. price of 300€.
I`ve heared that you hardly find a quality product below 400€ but as I don`t need to cover too much space (right now 80x80x150cm would be just fine) I think I could have one too.
LOOKING FORWARD FOR YOUR ADVICES!
What LED-light would you recommend for growing 3-4 plants in the attic area. I have no grow-box, just free space of around 120x80x160cm which I can fence off if necessary but don`t want to add too much equipement like filters etc..
I can start first stage at the sun (through my room`s window), later on I would take them to the mentioned area where I would like to give them the best that is available at EU market for the max. price of 300€.
I`ve heared that you hardly find a quality product below 400€ but as I don`t need to cover too much space (right now 80x80x150cm would be just fine) I think I could have one too.
LOOKING FORWARD FOR YOUR ADVICES!
PSUAGRO.
Well-Known Member
http://www.bonsaihero.com/ledgrow.html cheapest high quality panel in EU, buy as many as you can afford..........65w/80w versions, both work well.QUESTION FOR YOU, LED-EXPERTS
What LED-light would you recommend for growing 3-4 plants in the attic area. I have no grow-box, just free space of around 120x80x160cm which I can fence off if necessary but don`t want to add too much equipement like filters etc..
I can start first stage at the sun (through my room`s window), later on I would take them to the mentioned area where I would like to give them the best that is available at EU market for the max. price of 300.
I`ve heared that you hardly find a quality product below 400 but as I don`t need to cover too much space (right now 80x80x150cm would be just fine) I think I could have one too.
LOOKING FORWARD FOR YOUR ADVICES!
John.Doe.MJ
New Member
If anyone can look up my thread asking about LEDs and some other topics if you have some free time thanks a lot!
https://www.rollitup.org/grow-room-design-setup/819328-closets-grow-need-feedback-advice.html
thanks a lot!https://www.rollitup.org/grow-room-design-setup/819328-closets-grow-need-feedback-advice.html
What would you guys suggest out of these two for a PC case grow?
http://www.htgsupply.com/Product-10-Watt-Tri-Band-LED-Grow-Light
http://www.htgsupply.com/Product-LED-Spotlight-Bulb-TriBand-Spectrum---ONE
Would either of them be enough for a single plant? thx
http://www.htgsupply.com/Product-10-Watt-Tri-Band-LED-Grow-Light
http://www.htgsupply.com/Product-LED-Spotlight-Bulb-TriBand-Spectrum---ONE
Would either of them be enough for a single plant? thx
PSUAGRO.
Well-Known Member
crap^^^................http://www.homedepot.com/p/Cree-60W-Equivalent-Soft-White-2700K-A19-Dimmable-LED-Light-Bulb-BA19-08027OMF-12DE26-2U100/204592770?N=5yc1vZbol .............way better and buy as many as your case can handle(heat)
Myles117
Well-Known Member
damn man that shit got deep fried! is that from fert burn? dont think its the lights fault but definitely a bummer on an otherwise decent looking harvest.
BlackMesa
Active Member
Agree, I bet if the nutes were cut in half, yield would drastically increase. I always have had to dumb down the nutes with my DWC grows using LED but now have my ultimate go to feeding schedule after much experimentation.
- Status