I hate trimming thread!

Since doing whole plant harvests I was hitting 18%, 19% then 16% but that one was dried in grow room hot dry windy. Then 17%, 15.5% twice. I did a couple 13% was starting to question things and led to here, was a 60/60 issue. Got a 17% that possibly could of been a 19%. Who knows how higher the others would of been too.

I got one big plant left idk what it is but will see. These are all 6-7oz clones. A couple of the initial ones I mentioned were smaller but ya. I dont think I lost the pheno. Its just a performance thing if anyone did the same thing as me they wouldnt always have 20%.

The 15% low temp was so blond it was basically clear and shattery but thats on a good day. It could be much lower so I just stick with 220F for the highest. It looks great as yall saw and potent, so why not. Easier to collect to but sometimes hard regardless due to extra terpy. A lot of times those retain more flavor with time.

Sometimes like now its very flavorless but lower temps I doubt would improve that. This increadible inhale and exhale and after taste was more present in the high temp press.
 
My pheno doesnt yield anything like 7% at 175F. Idk if I ever done 200F I just know 220F loosens it up and becomes free flowing. Its more tasty and potent for some reason and more yielding literally double. I read you can do 1.5 min at that temp but I just do 45 sec.

I dont notice any difference pressing longer, slower. Only thing that sky rocketed yield was 220F, hand trimming and now 60/60 drying I learned. I think it works the same with all strains, Id just try a lower temp if it does better quality and yield that way.

I had someone here press for me a pheno I was interested in and was nice enough to try that. It was slightly less yielding and different texture at 220F so obviously do the 175F. This pheno I got just aint like that tho its the opposite except it yields nothing at 175F worth keeping.
I’m usually right around 210F for nugrun. 200-220.
Usually around 170 for squishing concentrates.
 
trimmin. Had to figure out how to get the dry space dryer. I just put up a drop cloth plastic sheet to isolate the area to a small 25 sq ft area. Its working tho, Im happy so I got to trimmin. Would work better if I made it more air tight.
 

Attachments

  • IMG_0270.jpeg
    IMG_0270.jpeg
    2.5 MB · Views: 1
  • IMG_0265.jpeg
    IMG_0265.jpeg
    1.6 MB · Views: 1
  • IMG_0266.jpeg
    IMG_0266.jpeg
    1.7 MB · Views: 1
  • IMG_0260.jpeg
    IMG_0260.jpeg
    4.2 MB · Views: 1
  • IMG_0264.jpeg
    IMG_0264.jpeg
    4 MB · Views: 1
  • IMG_0262.jpeg
    IMG_0262.jpeg
    2.3 MB · Views: 1
  • IMG_0259.jpeg
    IMG_0259.jpeg
    1.8 MB · Views: 1
Back
Top