Is that a 3x3?First flowering week with the boards on the fixture, the girls look super happy so far. Running the boards (4 qb120 on 2.1 driver) on 70% and the cobs (5 vero29 36v on 1.75 driver) around 60%. Increasing the power daily in a few points until I'll reach 100% on the boards and 80% on the cobs.
Jilly bean clones where transplanted on Nov 1st, switched to flowering on Nov 12th.
They have a Promo code where you can get 90g or 230g for free, just pay postage. Good until 31 Dec. There is a clickable coupon to get this discount on the website.
First flowering week with the boards on the fixture, the girls look super happy so far. Running the boards (4 qb120 on 2.1 driver) on 70% and the cobs (5 vero29 36v on 1.75 driver) around 60%. Increasing the power daily in a few points until I'll reach 100% on the boards and 80% on the cobs.
Jilly bean clones where transplanted on Nov 1st, switched to flowering on Nov 12th.
What happens in the grow tent, stays in the grow tent!
What board are you talking about? The 304 works great at 700ma I wouldnt go lower than that unless you need to run the plants closer than 12 in
If you want to run 600w that's fine you don't get double watts from changing the voltage if that's what your asking. If your wondering if you can run 2 drivers on one 220 outlet that would be fine might even fit 3 or 4 depending on how many amps your breaker is
Not sure about current but same wattage would apply 304 at 700ma is 75ish watts so a 288 running around 75 watts would be the same
I'e a QB288 on a cheapo chinee driver running at about 650ma
