DIY with Quantum Boards

H

hawkems

Active Member
Humple said:
So it does! Interesting. HLG used to list them at a max of 60w per board, without heatsinks (back when I bought mine). I don't see that driver listed though? I'd still go for the 132s though - same price, more diodes, higher capacity.
Click to expand...
It is under the series dimmable section.
The 132s do use more voltage though, for pretty low amounts of potential gain.

Yeah I noticed we do a lot of mental math without checking the datasheets. I've been super guilty of it and I've been trying not to lately. I'm sure I'm not the only one! :p
 
Humple

Humple

Well-Known Member
hawkems said:
It is under the series dimmable section.

Yeah I noticed we do a lot of mental math without checking the datasheets. I've been super guilty of it and I've been trying not to lately. I'm sure I'm not the only one! :p
Click to expand...
I hear ya', but honestly, I'm not likely to check a datasheet every time I post, just in case they've updated it. Good on ya' for the heads-up though. Now I'm off to see if they've up-rated the 132 as well...
 
H

hawkems

Active Member
Also just looking it seems like it would be a pain to adjust the driver needed to run 4 132s at 2000ma. I've seen them run at 2100 ma with no issue though, except maybe shortened life of the diodes.

Either board option would definitely work.

Do you use the qb132s right now, and if so how do you run them?
 
Humple

Humple

Well-Known Member
hawkems said:
Also just looking it seems like it would be a pain to adjust the driver needed to run 4 132s at 2000ma. I've seen them run at 2100 ma with no issue though, except maybe shortened life of the diodes.

Either board option would definitely work.

Do you use the qb132s right now, and if so how do you run them?
Click to expand...
No, I use QB120s. Two 4xQB120 fixtures, each powered in series by an HLG-240H-C2100A, at just over 60w per board, for 250+ watts per unit.

Edit: I built these lights before the QB132 was released. For my tents (two, each 31"x31"), the 120s give me more than enough power, but if I had a 3x3, I'd go QB132.
 
Humple

Humple

Well-Known Member
hawkems said:
I was thinking about doing an 8 board qb120 fixture in a 2x4 or 3x3 personally. Just going 4000k full cycle. Grab 4 for veg and add 4 more when I want to flip.
Click to expand...
How are you thinking of powering them? Eight boards in a 2x4 would be a tight fit, but if you run them soft, you would have great coverage and efficiency. I certainly wouldn't max out that many boards in that size space, though.Waaaaay too much!

My fixtures are both 3000k, and they veg and flower awesomely, but from what I've heard, 4000k is also a good all-rounder.
 
H

hawkems

Active Member
I'd probably put them on the 2x 320h-2800a and just dial them down to 600 umol veg 900 umol flower with a par sensor. Oversize and let the efficiency be dictated by the spaces need with testing.

*shrug* it's an approach, but also allows me to not have to buy new drivers in I want to run them in a sealed room or move them into a 4x4 down the road.

By the time I buy I might just put all 8 on a hlg480h-c2100a though.

(Edit: With a watt sensor it would be easier to tell exactly what wattage each board needs to run to get that. Wish I had the money to be able to test all the tech I wish I could. Whenever I build it though I'll send the info out to you guys)

It would look something like this
 
Last edited:
Budzbuddha

Budzbuddha

Well-Known Member
Wonder if 304 will get the LM301 bump , been running OG S5 bin ( still happy ) but looks simple to swap my four boards to 301b and run same power rig ... paper clip to wire holders , unscrew old boards and replace with 301 ... ?

304 V2 ? ...

@robincnn ?

S5 is still doing the job and can be used for a side build ( seedling / clone tent ) or ???
 
Aolelon

Aolelon

Well-Known Member
Budzbuddha said:
Question:
Is Coco loco precharged or needs rinse ?
Coco virgin and was looking at a hempy style with coco .

Plants look killer.
Click to expand...
There is a pic of the ingredients posted. It does have amendments in it. Doesnt need to be rinsed. I've been running it like hydro, DTW and the plants have been growing just a bit slower than my RDWC
 
pop22

pop22

Well-Known Member
Would be nice but I don't see the value in upgrading, the gain is not significant enough to justify the cost


Budzbuddha said:
Wonder if 304 will get the LM301 bump , been running OG S5 bin ( still happy ) but looks simple to swap my four boards to 301b and run same power rig ... paper clip to wire holders , unscrew old boards and replace with 301 ... ?

304 V2 ? ...

@robincnn ?

S5 is still doing the job and can be used for a side build ( seedling / clone tent ) or ???
Click to expand...
 
TurboTokes

TurboTokes

Well-Known Member
Can anyone help me with a parts list off amazon for a 3-400watt quantum build Prefer a 4000k light setup.

I'm on the fence if I should have it be dimmable
 
Humple

Humple

Well-Known Member
TurboTokes said:
Can anyone help me with a parts list off amazon for a 3-400watt quantum build Prefer a 4000k light setup.

I'm on the fence if I should have it be dimmable
Click to expand...
Why on the fence regarding dimming? That's one of LED's big advantages over HID - use only as much power as you need at a given time.
 
pop22

pop22

Well-Known Member
Most Meanwell drivers are dimmable. the difference being, one has an internal pot and the other you supply an external pot or other dimmer.

Don't build your light by watts, build it by area coverage. 2 boards running at 150 watts each won't give you the same coverage as 4 running at 75 watts each.
What size is your grow room or tent? A 4'x4' tent or space can use 4 QB boards, both QB 288 and QB 304 are good choices. 4 QB304 in parallel on a Meanwell HLG320H-C2800b will give you a max of about 360 watts and produces a lot of light. I'd say about perfect for a non CO2 enhanced garden. Or 4 QB288 on a HLG320H-54b in series for 75 watts per board. Lots of other combos possible also, but these will work.

TurboTokes said:
Can anyone help me with a parts list off amazon for a 3-400watt quantum build Prefer a 4000k light setup.

I'm on the fence if I should have it be dimmable
Click to expand...
 
Jefferson1977

Jefferson1977

Well-Known Member
pop22 said:
Most Meanwell drivers are dimmable. the difference being, one has an internal pot and the other you supply an external pot or other dimmer.

Don't build your light by watts, build it by area coverage. 2 boards running at 150 watts each won't give you the same coverage as 4 running at 75 watts each.
What size is your grow room or tent? A 4'x4' tent or space can use 4 QB boards, both QB 288 and QB 304 are good choices. 4 QB304 in parallel on a Meanwell HLG320H-C2800b will give you a max of about 360 watts and produces a lot of light. I'd say about perfect for a non CO2 enhanced garden. Or 4 QB288 on a HLG320H-54b in series for 75 watts per board. Lots of other combos possible also, but these will work.
Click to expand...
I agree about the spread. Mine aren't DIY but I have a 600h and 2 x260xl spread out doing about a 5x9 area right now. Definitely getting more than I would using 2x600h instead, similar wattage though.

I mean 4lbs+ from 1.1kw non-co2 is blowing my mind. I had twice the HID wattage with those results before.
 
pop22

pop22

Well-Known Member
either of the combos I suggested would work very well in that size area. I'd probably dim them a bit until the went into flower. Will depend how much headroom you have.

Not QBs but I'm running only 270 watts of COB in a 4x4 with good success. Only 2 plants for the current grow , plus a hanging basket just for some different bud lol, but they are looking fine.


Blue Dream pic1 -8-25-2018.JPG

TurboTokes said:
My area is 3x3 and likely only autoflowers for the foreseeable future
Click to expand...
 
You must log in or register to reply here.
Top