Takes differenr enviorments to evaporate oil and water.allsoo at lower atmoapheres water boils at lower temps.dont know about terps but should not be the same
Takes differenr enviorments to evaporate oil and water.allsoo at lower atmoapheres water boils at lower temps.dont know about terps but should not be the same
The vapour pressure of limonene (as a characteristic terpene) at 20 °C is 20 kPa. The vapour pressure of water at the same temeprature is 2 kPa. When the vapour pressure is equal to ambient pressure it boils.
So when reducing the pressure limonene boils first and water boils second.
The vapour pressure of limonene (as a characteristic terpene) at 20 °C is 20 kPa. The vapour pressure of water at the same temeprature is 2 kPa. When the vapour pressure is equal to ambient pressure it boils.
So when reducing the pressure limonene boils first and water boils second.
It's 5 Pa for limonene and 10 Pa for water. This means water evaporates more readily. So there might be a possibility to design a process. One detail: the difference in vapour pressure is small so both will evaporate under the same conditions. The same reason that limonene gasses off at ambient temperature although it's boiling point is 173 °C at ambient pressure.
When water evaporates it requires large amounts of energy, thus cooling the surrounding space. Limonene (and other terpenes) have a lower enthalpy of vapourization which translates to less cooling and quicker evaporation. During the drying process both water and limonene evaporate. When water evaporates it reduces the local temperature, lowering the vapour pressure of nearby water, effectivly slowing the drying process. When limonene evaporates this effect is less pronounced. In a perfectly (thermally) isolated system this would cool the flower so much that the drying halts because it is too cold to evaporate.
Freeze dryers have heated shelfs for this reason. They add the heat that is taken out during evaporation. But thermal conduction is slow and depends on loading of the machine. Thick layers means large distance between heated surface and the flower that needs heating. There is also a temperature gradient with some pieces of flower being warmer than others where the difference in vapour pressure is reversed.
Yes, first you drop the temp. I take mine to -20 but I dry at 40 degrees. It depends on where you keep your mtorr what you pull off. That's why it's common to use a digital bleed valve so you don't pull off too much. I have no loss of terps in my freeze dried weed than my traditional dried weed or the weed I dried in my Koolatron.