Search results

Save $20 on the Pulse One – use code GROWTIPS at checkout.

75 year old American lighting company, Dazor Lighting Technology gets into the Bar LED grow light game with the Parmax 4 and Parmax 8. Bluetooth mesh control is available. These bars don't need to use individual 660nm and 730nm LEDs for the Emerson Effect. They use horticultural tuned Lumiled...

I assumed the Grodan Macro Plugs were designed to drop into the hole in the top of my six inch Grodan Hugo block of rockwool. I should have checked the fit before I germinated my seeds in Macro Plugs. I know the plant looks strange - it is a co-joined mutant.

I'd go to horticulturelightinggroup.com and buy one of their DIY Quantum board kits. You build the frame to hold the parts and connect the wires. I think RUI10 is a discount code at HLG.

@Feijao How did you turn off these LEDs? With a power switch or with the dimmer pot?

good enough for veg but not for flower. not enough watts/sq.ft. 200watts/12sq.ft=16.7w/sq.ft. flower needs about 30 watts/sq.ft of light.

Cobkits.com has all the repair parts for qb and cob based systems.

Taukealugs SPL-3 is good for quick disconnect AC power cord splicing.

HLG-120H-20AB should do the job. cost $48.75 at Mouser

cc is constant current driver while cv is the constant voltage driver type. Would you be happy with a wifi (no bluetooth) dimmer? The Bluefish controller does 0-10 volts and PWM.

1.The HLG-120H-54B driver can not be dimmed below 10% due to it's construction. 3.You need the Coralux 10v analog converter to use with the HLG-120H-54B.

The ebay seller recommends using a constant current driver. I suggest wiring all four red boosters in series with the HLG 80H-C700B .

Buy a 4x4 kit from Cutter

Pacific Light Concepts photo boost strips. Great spectrum with proven grow results on youtube Good build video

I'm not a Bluefish user. I'd buy 3 break-out boards so you can use all six channels. Put 5 Inventronics on each channels 1-5 and 2 on channel 6. May get lucky and be able to run 27 drivers off just two channels; I don't know Inventronics dimmer specs.

The wifi Bluefish LED controller will work with 5v and 10v PWM and 0-10v dimming and is available from a USA store.

Wouldn't an HLG 320-48a be a better choice of drivers? Running without a heatsink requires lower voltages. I'd buy 12 strips at a minimum.

ES300 is 36"x12" 22 pounds each X 12 = 264 pounds . $695 X 12 = $8340 300W X 12 = 3600W / 100'sq. = 36W/ft.sq. You can better handle an uneven canopy height with 12 individual lamps. 12 AC power cords in the tent. SB800 is 47"x47" Weight unknown. $1695 X 4 = $6780 880W X 4 = 3520W / 100' sq...

Rapid LED has a new UVA booster puck for $32.