Search results

They are hungry, last night the ppm had dropped to 483 from 584 in 24 hours, so I bumped it up to 748 to see how they like it.

Phosphorus deficiency can cause it as well. Or as stated, some strains have naturally red or purple stems. If it has really stunted, you may look at adding some.

We've got bush!

24/7 was for your fan or light? The fan can be left on 24x7, looks like there may have been some confusion (maybe it was just me) Get your light about 12" from the canopy if in a cool tube, and run it on a time 18 hours on, 6 hours off if they are not autos. If autos, I think 20/4 is pretty...

That or get a humidity switch. That way it will only get power if the humidity gets above a certain level. I use one that does temp and humidity to control my extraction fan, was super easy to wire up and cost about $15 You can also try just running it on a schedule using a timer to see if you...

This is what I use, love it. Its the best of both, a plug in variable transformer: http://www.ebay.com/itm/Variable-AC-Transformer-500VA-Variac-0-130V-TDGC2-0-5-/221349838900?pt=LH_DefaultDomain_0&hash=item33897a8034

Yeah, I had the same trouble when brewing in my garage on the cement. A little aquarium heater did the trick.

A couple things that can wreck a tea (I used for soil, not hydro) are chlorine in the water and cold water temps.

PPM dropped to 584, PH drifted up to 5.7 Its been a week from flip, and the growth just since the rez change it quite noticeable. I'll attribute this to the stretch from flip and I really think these girls prefer the lower PPM from the RO water. MG problems are no more and the uptick in the...

They drank a couple gallons over night, so they are really loving the lower PPM of the RO water. PPM went up to 750 so I added a couple gallons of new RO water and 5ml Grow, 15ml Micro and 20ml Bloom to get PPM to 650 with a PH of 5.6 Water temps 64-68f

What I wouldn't give for 32PPM tap water, mine was coming out today at 420...

I would not leave them all in a single container like that. You can end up with root contention and if you end up getting a male or have to pull one for any reason, you will end up with rotting roots that can wreck havoc on the rest of the plants. With that many strains you can also have...

I am moving from 2 5 gallon top drip buckets to an ebb & flow specifically because I want to reduce veg time and have more smaller plants (I have a 2x4 tent with a 600W cool tube). I chose this tub as my base which will have 6x6" net pots with the entire tub filled with hydroton...

Day 6 from flip Decided to just adjust my timer clock because otherwise I miss my morning chance to make adjustments. They got 11 hours of darkness (in hindsight I probably should have gone the other way and gave them a little less light, but its still early in transition) Res swap also today...

My PH had been around 5.5 for awhile, I adjusted up, but still 5.7 ish. It looks like I may have locked out mg so I adjusted up to 5.9.

Cool, but correct me if I am wrong, I think the second controller you listed will not work because it is powered by 12V DC and you would only have AC power. They do make a AC temp controller in C though, I just think you may have linked the wrong one. (again I could be wrong). I am doing...

because everything is better with Pictures.

2nd day since flip, managing canopy and scouting potential cuttings for clones. Added: 2 gallons of tap water 10ML Grow 30ML Micro 30ML Bloom 5ML Silica PH: 5.9 PPM: 1270

I spliced a Duo Stat into my fan. It makes it so I can set the humidity and the temp to make my fan go on. When I tried it only on temps, my humidity shot through the roof. If humidity is not a concern you can use a ductstat plug in:

With the E&F I will have a 3/4" drain on the riser returning to the same location, and then a 1/2" on the fill tube that will drain when not running. That 1/2" I will need to keep an eye on, since I will probably have only a 8" drop over about a 6' run so it may drain a little slow. I guess...