Adjusted my intakes to make sure no light is getting in. Suspect the problem may be a light leak from the 2 lower intake vents causing an interruption of the dark cycle.
The plants I took these clones from are 8 weeks in, the plants with the problems are about 11 days in to 12-12. Being that both of the plants are in the back corners (both sides) the most likely problem seems to be a light leak which would explain why the front and middle plants do not have any...
While fixing my root overgrowth problem(?) I managed to break a small branch with some bud on it. Since it never recovered and was just hanging there I just chopped it off. Trimmed it up and it is hanging in the dark for a few days. Will be harvesting the rest next week(about 80% of the trichs...
Running some clones from mothers I currently have 8 weeks into flowing. They are about 10 days into 12-12.
They a flood and drain table filled with hydroton. I am seeing stunted growth and a large number of deformed or single leaf fan leaves on 2 of the 6 clones I have running. They other 4 are...
So I have 2 of the plants that are runts and have curling and cupping leaves like this:
I am wondering if they are not getting enough water in the table. I am running flood every 3 hours for 3 minutes during lights on, then once during lights out. I think I will try upping the flood time to...
Thanks, yeah it's getting close so I should be fine. Will need to make some design changes if I run these buckets again.
Sent from my SGH-M919 using Rollitup mobile app
The far left rear plant is a major runt. Not sure what the problem is (they all came from the same mothers). I don't know if I should just cull it now, or leave it be and see what comes of it.
I don't do a lot of autos, but I have read that switching the lights to 12-12 on an auto is the way to help trigger them into flowering if they are not. I would dig around some to see if people generally just drop the lights to trigger flowering and then re-up the lights, or just leave them at...
They buckets had a 2.5" thick "disc" of nearly solid roots on the bottom that caused them to nearly completely block the drain. I lifted the root disc up and put a small 3" net pot in front of the drain and lift the disk up. hopefully this gets me through the next 1.5 weeks and doesn't cause to...
Roots blocked the bottom drain hole, I had some weed blocker screen on the bottom covering the drain, but the roots just got so thick and heavy in the bottom that the draining was slowed to a trickle.
Thankfully I just happened to be in the room checking it when it finally hit the tipping...