mobilekasey
Member
Yes. Inc brid is used by many in this thread as well.Nice. Is that the ac infinity controller?
Yes. Inc brid is used by many in this thread as well.Nice. Is that the ac infinity controller?
If it is the same as I am using it is for lining dehydrator or smoker shelves so is food safe and temp safe. I found it on Amazon, there is a link somewhere in this thread. I’ll edit this if I find it quickly.Where did you guys get that mesh screen that I’ve seen in a few pics?
I didn't mount it anywhere. But I'm sure the back part has an empty spot you could fill.Where has everyone been mounting there ac infinity controller and plug ins?
The one in your Amazon link looks like it should work. I don’t have any personal experience with any of the european manufacturers.does one have a european supplier (germany), e.g. amazon for your small dehumidifiers you all use? May i buy it as a backup.
may this one? https://www.amazon.de/MONHOUSE-Luftentfeuchter-Tragbarer-Kompakter-Feuchtigkeitsabsorber/dp/B0BHZLSRSH/
I will eventually mount my AC Infinity controller to the front of the fridge near the temperature readout. Right now its just on its stand on the top of the fridge.Where has everyone been mounting there ac infinity controller and plug ins?
Things are still going strong. 8 days in and just set the RH target to 66. So much better than trying to fight the heat and dry during these hot days in my garage.I started my dry on Sunday at 55/75. I've been lowering humidity by 1 each day. Had a couple of hiccups like water not draining properly and not knowing how to add my 1 buffer. I think I'm on track now. Should be going down to 55/72 today. Thoughts?
I'm not done yet but its been working nicely. I started out at 55F/75RH. In the AC Infinity app I did Advanced Automations and set the target RH to 75% with 1% buffer. I reduced the target by 1% each day (66% as of today) and once it reaches 60% I will let it sit there until it flatlines at which point I'll bag it up in grove bags.Have a grow finishing in the next few days so decided to build my fridge today. Still waiting on the grills to come in for the rack but the rest is done.
Used the Koolatron 20 bottle cooler. AC infinity controller 79 pro. Pro Breeze dehumidifier.
I took the back cover off and put the hole right under the ground wire. Then I tucked up all the wiring underneath the cover
View attachment 5404397
Final result is nice and clean. @davesnothere123456 since you're looking for mounting ideas.
View attachment 5404398
Cut the bottom grill so it'll slide in with the dehumidifier in place.
View attachment 5404399
I may end up attaching the sensor to the rack to get it more in the middle. I'm a bit worried having it near the fan could skew the readings a bit. I also plan on sticking a Xiaomi temp/humidity sensor to the glass of the front window for a quick visual check. Both the AC Infinity controller and the standalone temp/humidity sensor will be able to report data back to Home Assistant.
I may have missed it, but can somebody share their automations in the AC Infinity app that you're using to control the dehumidifier? Trying to wrap my head around the process of stepping it down gradually.