meangreengrowinmachine
Well-Known Member
I decided to just go simple and straight hose to the outlet and hose clamp it. Leak test and making sure it all functions again is going great! Thanks for all your help man!!!!
Decent bubble bags
- Thread starter meangreengrowinmachine
- Start date
MICHI-CAN
Well-Known Member
I like the simplicity. See issues after playing with mine. But you thought about a plug. More ahead than most. Will work better than original. All that matters. And not sure how long these motorized pop bottles will actually go anyways.
meangreengrowinmachine
Well-Known Member
I actually switched out the plug already for a 90 degree one so it flows downward. And yeah after looking at the design of the thing... it seems like a very simple set up... motor that can alternate direction... a belt... a tank and a controller to alternate the direction...if one could find the right motor seems like this would be very easy to replicate on a larger scale if someone wanted to. Because yeah it really is a motorized pop bottles lol
meangreengrowinmachine
Well-Known Member
So are there a set of bags that are not fucking insanely irritatingly fucking tight on the buckets!? Wow how frustrating
MICHI-CAN
Well-Known Member
I have one pain in the ass. Just sand the ribs off the outside of the bucket by mechanically powered means. Leave no sharp anything and solved.
meangreengrowinmachine
Well-Known Member
O
Omfg brilliant! THANK YOU!!!!
MICHI-CAN
Well-Known Member
I just need once, maybe twice around the block before I'm modifying things. LOL. Hope it helps.
MICHI-CAN
Well-Known Member
I don't suggest fire and compressed to most. But easier trick is to fill your 5 right to the top with tap water. Then heat the rib while maintaining constant movement till rib sags. Move to next until all fall or sag. Decreases diameter without damaging. Doubles as a smooth directional barb now. But that's my most advanced to date. No mess and honestly safer means to the end.
berulakide
Well-Known Member
H
Hey, I know I am late but the bubblemans are the best I have used. I used some cheap ones and they plugged up and drained terribly after not long because of what the screens are made from. I didn't get the 'OG" bags but I got the "standard" ones because the screens are identical but the bags are a bit thinner. I have used the OG bags and love them but didn't wanna shell out the cash. I have had the bags for 6 years I believe now with no problems. They are still just like new
meangreengrowinmachine
Well-Known Member
So expensive though
meangreengrowinmachine
Well-Known Member
So far so good!
Attachments
berulakide
Well-Known Member
Looks like good stuff if you have insta or the tube check my page cannabisconcentration . I do a lot of bubblehash and rosin and grows and more love my solventless everything
meangreengrowinmachine
Well-Known Member
Thanks man! I'll check you out on insta
meangreengrowinmachine
Well-Known Member
On run number 11... at 15 min on the washer now.. still seeing stuff in the 45 bag... do I just keep going until I get nothing lol?
berulakide
Well-Known Member
I stop once the hash coming out isn't light anymore or starts to show some green. Some ppl will keep going but I don't like to mix low quality in with the good good stuff.
meangreengrowinmachine
Well-Known Member
Yeah I think I am going to take the more green tinted stuff and maybe use it for edibles or something. I ended up doing 12 total washes. The first was just 30 seconds, then 4 washes at 3 minutes 2 washes at 6 minutes then then the test at 15 minutes with the final one being 20 minutes just to make sure I got everything I could. Everything is freezing up now then I will microplane, into some pizza boxes and let dry. This was my first time using the machine I have to say it worked pretty well. Oh one thing... the hose clamps came off at the end of my very last drain (so lucky there) I will be adding some type of glue to it when I hook it back up and would advise anyone else modding it to do the same.
Last edited:
meangreengrowinmachine
Well-Known Member
Suggestions on microplaning... do I..
A. Microplane directly onto the cardboard in order to have some of the moisture wicked away by the cardboard? Or do I risk getting particles from the cardboard in my hash?
B. Add parchment paper to the box and plane onto this. No moisture wicking but also no direct contact with cardboard.
A. Microplane directly onto the cardboard in order to have some of the moisture wicked away by the cardboard? Or do I risk getting particles from the cardboard in my hash?
B. Add parchment paper to the box and plane onto this. No moisture wicking but also no direct contact with cardboard.
natureboygrower
Well-Known Member
I'd use the parchment paper. Those little 25 drying/pressing screens are nice. You might want to look into those if one didnt come with your bags. Ive been drying my patties on one of those, with screen underneath on a laundry drying rack. All sides are exposed to air ( you can kind of see that set up in the pic I posted over in the other hash thread)
Looking good!
berulakide
Well-Known Member
I usually do mine onto basket style coffee filters and label them. Them put to dry where you are gonna. Pizza boxes will help dry faster for sureI didn't even bother modding my washer. I always save a bit if room to put drain hose back up and put more water in and rinse the ice and material again to get most of the remaing resin heads in there from that wash I only do 3 or 4 washes but start lower time like 5-10minutes tops depending on material. I always use fresh frozen so it won't crumble up like dry and it makes a better product too.
natureboygrower
Well-Known Member
Do you press your ff?