Yes but only from China, as far as I know.Do 1m / 3' strips exist ?
Im looking to do my first light build.
My tent is 3.5 x 3.5 x 6.5
^This.^I saw some close to 3', but don't remember where!
I used three one ft. strips and others have used a 1ft. and a 2 ft.
^This.^
You can either buy from R2T, or just use a 2&1' or 3 1's.
Ill link you 1' gen 2 ebs for super cheap.I was looking at the Samsung F series LT-564B 2' strips, is there a 1' version of this ? If so can I please get a link ? I can't seem to find anything.
EB gen 3sthank you, price is not the concern though, are there a better/different options ?
or am I overthinking this. I just want to make the best light I can right now & not worry about upgrading for a while.
Thank you so muchEB gen 3s
Here's the 2' ones
BXEB-L0590U-30E1500-C-C3 Bridgelux | Optoelectronics | DigiKey
Order today, ships today. BXEB-L0590U-30E1500-C-C3 – LED Lighting COBs Engines Modules LED Module series White, Warm Linear Light Strip from Bridgelux. Pricing and Availability on millions of electronic components from Digi-Key Electronics.www.digikey.com
And the 1' ones.
It will be 590mm+340mm=930mm end to end.BXEB-L0340U-30E0750-C-C3 Bridgelux | Optoelectronics | DigiKey
Order today, ships today. BXEB-L0340U-30E0750-C-C3 – LED Lighting COBs Engines Modules LED Module series White, Warm Linear Light Strip from Bridgelux. Pricing and Availability on millions of electronic components from Digi-Key Electronics.www.digikey.com
That's exactly 36" or 3'.
You can use as few it as many aS you'd like as long as the minimum# is going to be within the current range the strip can handle. By adding more of them, the crew t to each strip goes down even spread yes you can definitely out 2-3 side by side on a 2" wide heatsink.Thank you so much
Please excuse my ignorance on this subject , If you can, could you please suggest the amount of the above listed strips & required driver to max out & build a "good" light please, I would like to build the best light I can right now so I will not "need" to upgrade for awhile.
I see these strips are only 1/2" wide, would it be okay to run 2 strips, side by side on a 2" wide heat sink ?
Say 12 - 36" HS's with 2 of each strips mount on each ?
I really appreciate your time & help, thank you
Yeah, something like this but with 2 ft strips in each corner; even better: get 2 drivers, one for 4 strips in the perimeter and another for the central ones, that way you can really get perfect evenness by both design and dimming till you get it right.Assuming you have to build a frame for this, why not get a little creative. if you stick with 2ft strips your options in terms of available, easy to get strips opens up, offsetting strips has very little impact on coverage, just means you need a couple more spines on your frame
View attachment 4598414
Cheers
Mark
Thank YouSI-B8V261280WW Samsung Semiconductor, Inc. | Optoelectronics | DigiKey
Order today, ships today. SI-B8V261280WW – LED Lighting COBs Engines Modules LED Module series White, Warm Linear Light Strip from Samsung Semiconductor, Inc.. Pricing and Availability on millions of electronic components from Digi-Key Electronics.www.digikey.co.uk
SI-B8V261280WW