LED grow from start to finish

calitrees916

calitrees916

Well-Known Member
Day 56 of flower

(GP5) purple punch x GG4 screen below

IMG_6716.JPG IMG_6717.JPG IMG_6718.JPG IMG_6719.JPG IMG_6720.JPG

This picture below is of a Cherry Pie clone that I picked up at the local shop. I stuck in in a 1 gal pot of coco way out on the perimeter of the canopy for testing purposes only. I know it didn't get the best light but it is still producing some good size nug meet being way out on the side!

IMG_6722.JPG
 
Humple

Humple

Well-Known Member
calitrees916 said:
Day 56 of flower

(GP5) purple punch x GG4 screen below

View attachment 4177066 View attachment 4177067 View attachment 4177068 View attachment 4177069 View attachment 4177070

This picture below is of a Cherry Pie clone that I picked up at the local shop. I stuck in in a 1 gal pot of coco way out on the perimeter of the canopy for testing purposes only. I know it didn't get the best light but it is still producing some good size nug meet being way out on the side!

View attachment 4177071
Click to expand...
Looking mighty tasty. How much longer do you figure for each strain?
 
calitrees916

calitrees916

Well-Known Member
Bongsmoke420 said:
Bro that gp5 looks soo damn tasty what height u keeping ur boards from ur tops I got 2 260 w diy kits... I got em full power near 30 inches above tops... View attachment 4177106

Bruce banner View attachment 4177108
Click to expand...
Thanks for the kind words @Bongsmoke420. The GP5 looks and smells great this far, however I'm not too impressed with the size of the colas, seem a little small! I run my QB's between 20"-36". I'll start with them high and progressively drop them lower. I hope that helps. Also don't be shy do ask questions, as I ask questions every chance I get.
 
calitrees916

calitrees916

Well-Known Member
Bongsmoke420 said:
Bro that gp5 looks soo damn tasty what height u keeping ur boards from ur tops I got 2 260 w diy kits... I got em full power near 30 inches above tops... View attachment 4177106

Bruce banner View attachment 4177108
Click to expand...
@Bongsmoke420 im a little confused on what you are running for your lighting source. Did you get a kit from HLG or did you diy those rigs? If you don't mind can you clarify what you are running for your light source,i.e. What boards/drivers?, so I can better understand. Thanks bud!
 
Bongsmoke420

Bongsmoke420

Well-Known Member
calitrees916 said:
Also I'd like to say your ladies look nice and healthy. I wish we could get a whiff of how your tent smelling right about now
Click to expand...
I bought one from a retailer in aus and I bought one direct from HLG. 1 is a q.b v1 diy kit... pretty sure it’s 260w... the one I bought from the states came with 304 boards.... I ordered a v1 but I think I was given v2... I’m not complaining... I raised em that high coz some outsides of the larger fan leaves started to yellow so I thought the intensity of the light might of had something to do with it. Thanks bro I have been using these lights for 3 weeks and I am amazed how dense they have made everything... yeah I’m smelling very sweet floral, got carbon filter working overtime... hoping to just get used to them this run and dial them in for the next :)... your setup is wicked bro.... I’m keen to see what else you have coming up
 
calitrees916

calitrees916

Well-Known Member
oill said:
@calitrees916 this is mega. Made me feel that i am way over powered for my are.

I have 2x 3 qb pannels... So 6 pannels in totally in a 5x5 running at 2100ma
Click to expand...
@oill I don't quite understand what your post is saying. If you could be a bit more transparent as too what you are using to light up you 5x5 area? I.e. - which panels and which drivers are being used?

The 2 rigs that are used in this grow I built in a DIY fashion, in which each rig is composed of 6 qb304s and 3 hlg-240h-c1050 drivers.
 
O

oill

Well-Known Member
calitrees916 said:
@oill I don't quite understand what your post is saying. If you could be a bit more transparent as too what you are using to light up you 5x5 area? I.e. - which panels and which drivers are being used?

The 2 rigs that are used in this grow I built in a DIY fashion, in which each rig is composed of 6 qb304s and 3 hlg-240h-c1050 drivers.
Click to expand...
I have 2x 3 qb 288s. And 2 x hlg480-2100c drivers powering 3 boards each... So 6 boards in total.
 
You must log in or register to reply here.
Top