does this one fit on a cxb 3070?for CXA30XX it's possible to use
BJB///OEM-LineSpotlight connectors for COB LED modules
I'm waiting some piece to test, the wheelbase to secure it is the same as the IDEAL model.
I overlap the 3D and just change a few tenths.
View attachment 3178836
COB holders - the basics
- Thread starter Mellodrama
- Start date
Rahz
Well-Known Member
CXA and CXB have the package size so it should work fine with CXB.
I have a question about the ideal holders. I just got some in the mail today and notice each plastic clip has two wire entry points. Why are there two if running in parallel isn't an option?
Also, I got these holders from Newark and they don't have keyholes for the screws. Not a big deal but it would have been nice to have that feature. I don't know if they are getting rid of an older version or what.
I have a question about the ideal holders. I just got some in the mail today and notice each plastic clip has two wire entry points. Why are there two if running in parallel isn't an option?
Also, I got these holders from Newark and they don't have keyholes for the screws. Not a big deal but it would have been nice to have that feature. I don't know if they are getting rid of an older version or what.
The second hole is a release slot, Put a 1mm nail etc in there and it will release your wire from the other hole. It's somewhere in a description (datasheet maybe).
Mine didn't have that keyway shaped screw slot either (purchased last year), I considered they were different setups in the different size holders, hasn't been an issue.. just need accurate hole'
Mine didn't have that keyway shaped screw slot either (purchased last year), I considered they were different setups in the different size holders, hasn't been an issue.. just need accurate hole'
bizfactory
Well-Known Member
What do you mean by keyway / keyhole? I just got some ideal holders for my CXBs and they do have little slots in the screw holes that you can rotate the whole thing to lock it in I guess.
bizfactory
Well-Known Member
Mine arrived last Tuesday from Newark...weird. These specifically, mine look just like the pic... http://www.newark.com/ideal/50-2234c/led-holder-cxa30-array-series/dp/90W0065
Mellodrama
Well-Known Member
Some of Ideal's holders have the keyway slots, some don't. The 50-2234C's I bought over a year ago didn't.
p4id
Well-Known Member
has anyone tried these holders
http://canada.newark.com/webapp/wcs/stores/servlet/Search?st=cxb&catalogId=15003&categoryId=800000005505&langId=1&storeId=10196
Would they fit cxb3590 ? I like the look of this one
http://canada.newark.com/te-connectivity/2213401-1/led-holder-cree-cxa-array/dp/62X8512?MER=PPSO_N_P_EverywhereElse_None
it just looks nice and neat to me.
http://canada.newark.com/webapp/wcs/stores/servlet/Search?st=cxb&catalogId=15003&categoryId=800000005505&langId=1&storeId=10196
Would they fit cxb3590 ? I like the look of this one
http://canada.newark.com/te-connectivity/2213401-1/led-holder-cree-cxa-array/dp/62X8512?MER=PPSO_N_P_EverywhereElse_None
it just looks nice and neat to me.
Scotch089
Well-Known Member
They had 11 left last time I looked but 5 hey must of gotten nabbed up. Might be worth asking what the lead time is.
http://www.newark.com/ideal/50-2303cr/led-holder-cree-cxa35-cob-array/dp/39X0077
http://www.newark.com/ideal/50-2303cr/led-holder-cree-cxa35-cob-array/dp/39X0077
Did yo
Did you figure this one out? Seems to be a lot of holders out there that specify for CXA18 and CXA25 but not CXA30 or CXB35:/
medicinehuman
Well-Known Member
I got 10 from Newark about a week ago but they still owe me 4 when they get them.
After a bit of a look around.... I don't think so. Don't quote me on this but it looks like COB's remain the same physical size as long as the 35 or 25 is the same. e.g. a holder for CXA35.. will suit a holder for a CXB35.. The holder you have suggested is for a CXA18.. or CXA25.. Again don't quote me as this is just from looking through data sheets, not from actual experience.
alesh
Well-Known Member
Sure, CXA and CXB are of the same dimensions. A holder that fits certain CXA, fits also it's CXB counterpart. They're meant to be a drop-in replacement.
Haha beauty! Thanks for that as I had wondered if I had just wasted my money!
I think this may only be applicable for people in the right hemisphere, but I just ordered 4 holders from the below address.
http://au.element14.com/ideal/50-2303cr/led-holder-cree-cxa35-cob-array/dp/2402171
Cali weed
Well-Known Member
Alot of helpful info here guys keep up the good work, I'm studying up lol. So far I have these toys
artic 11 pc cooler
Prolimatek pk3 thermal paste
Kapton tape
2 Cxb3070 AD bin (1 for my next build)
Mean well LPC 60 1040
Unfortunately I've never soldered or wired and Im lost but I'm going for it lol
artic 11 pc cooler
Prolimatek pk3 thermal paste
Kapton tape
2 Cxb3070 AD bin (1 for my next build)
Mean well LPC 60 1040
Unfortunately I've never soldered or wired and Im lost but I'm going for it lol
I just wanted to give a shout out to the people of the link I shared earlier.
I ordered 4 Cree holders yesterday at 16:00 and received them today at 08:00. I am a number of hours from the state capital so I'm not even sure how they managed it so quickly, but excellent service!
http://au.element14.com/ideal/50-2303cr/led-holder-cree-cxa35-cob-array/dp/2402171
I ordered 4 Cree holders yesterday at 16:00 and received them today at 08:00. I am a number of hours from the state capital so I'm not even sure how they managed it so quickly, but excellent service!
http://au.element14.com/ideal/50-2303cr/led-holder-cree-cxa35-cob-array/dp/2402171
Mellodrama
Well-Known Member
Uzzi, did Newark gouge you for delivery? When I ordered from them a year ago they charged $14 for Priority Delivery or some such nonsense, but I mighta missed checking the Super Saver box.