I just want to try a couple of plants to start with can I buy lights or bulbs that will bee good enough to start from Home depot or lowes....etc....
I would do the same if I had a stealthy way to hide the filter on the outside of the OP.
As is, the fan is doing the job and temps are stable at around 75-80F
I know all the air being pushed into the other side of the basement is fresh and clean
and there is no dust being pulled into my fan housing. One thing about the canfan I bought.
The seam around the middle of the unit where the two halves meet isn't sealed very well.
I used some duct tape and put a band around the seam. It pushes a LOT more air now than before.
I agree bro, Don't steal!!!Yup yup...I'm a general contractor...they are in fact all over large construction sites.
HOWEVER I HIGHLY DISCOURAGE STEALING FROM CONSTRUCTION SITES...IT'S DARK, THERE'S NO ONE AROUND...THEIVES THAT ARE CAUGHT ARE GENERALLY DEALT WITH SEVERLY WHEN CAUGHT IN DARK PLACES WITH NO WITNESSES.
BESIDES IT'S JUST FAWKING WRONG TO STEAL AND ALMOST AS WRONG TO CONDONE OR SUGGEST IT. BAD FORM MY FRIEND, BAD FORM!!!!!!
and on a more personal note...thanks, it's people like you that cost me hundreds of thousands of dollars a year replacing crap I find stolen, you know we can't work when you steal our stuff?!!?!?! Oh and those lights, that's called EGRESS LIGHTING, it's sole purpose is so we don't trip and kill ourselves at 5am when the fawking sun isn't even up yet. And when it's not in place OSHA comes and shuts down our job site because we are then in violation of federally mandated construction safety laws!!! Makes me sick when I have to be woken up by my Foreman because someone stole from our job site!!!!
YOU WANNA GROW POT FINE...DON'T STEAL FROM HARDWORKING PEOPLE TO DO IT!!!!!!!!!!!!!!
Hi there, this note is just to say that I'm very interesed in hearing how you (or anyone else for that matter) get on with the LED setup. Is the 80 Watts the actual electrical drain or an eqiv to, say CFL light output. Personally, I think that LED will be the way to go if all works out. Best of luck. PLEASE keep us informed.Any Info on LED Lighting. I started a small hydro garden ( 5 gallon container / 5 plants ) using LED lights ( Total 80 Watts / 2 red 1 blue light) on 4/15 plants are @ 6" and to me seem to be growing nicely ( roots are in resevoir) any reccommendations on flowering. Im a bit nervous that as the plants grow they will not receive ample light. Room is completely covered in mylar.
In SeeMoreBuds' book he uses CFL's from start to finish and yields 8 oz.does anyone have proof of using fluorescents from start to finish and getting descent bud?
HPS light = 150,000 lumens.How much light is needed?
The minimum amount of light required by marijuana plants is around 3000 lumens per square foot. However, it's not 100% accurate, since although you may have a 10,000 lumen light, the amount of light that reaches the plant varies with the distance between the light and plants, and reflectivity of the grow box. The ideal amount is somewhere around 7000-10,000 lumens/sqft, and as long as the plants do not burn, as much light can be used as you want.
(*note, the sun produces about 10,000 lumens/sqft, on a sunny summer day).
Determining lumens for your grow area:
Determine the square footage of your area (example in a 4 foot by 4 foot area, there is 16 square feet)
If you have a 1000 watt High Pressure Sodium, that produces (approx.) 107,000 lumens.
Divide this by 16 (your square footage) 107,000 / 16 = 6687 lumens per square foot.
So just divide the total amount of Lumens, by the total amount of Sq ft, and thats your lumens per square foot.