The UK Growers Thread!

[leepy]

same plant at wk 2 in veg an my home made fogger i used this with canna a+b init as well as water so not only did it raise the humidity it foiler fed em too

 

[imcjayt]

nice man...how long u veg?

 

[imcjayt]

bc at the back they 3 foot.....

 

[Saerimmner]

Come up against an obstacle setting the room up, having the intake fan running will be too noisy by far an will keep my daughter awake so does anyone know if a 4" passive intake about 6ft off the ground will be any good? Will be running a 6" fan filter n cooltube on exhaust fan

 

[imcjayt]

that's all I got mate....aint had no probs.....aint got to worry 2 much bout intake.....pressure dose the job....if put hand over hole I can feel the cold air being pulled in......

Come up against an obstacle setting the room up, having the intake fan running will be too noisy by far an will keep my daughter awake so does anyone know if a 4" passive intake about 6ft off the ground will be any good? Will be running a 6" fan filter n cooltube on exhaust fan

 

[imcjayt]

6 foot off ground mite be a bit to high tho......mines like a foot and half......off floor........intake bottom outtake top......opposite sides

 

[Saerimmner]

6 foot off ground mite be a bit to high tho......mines like a foot and half......off floor........intake bottom outtake top......opposite sides

yeah thats the problem lol, the ONLY thing i can use for a passive intake is a 42 hole 6ft off the floor, might just use it with a length of ducting on n let the pressure pull the air thru the ducting


will get some pics up in a sec so you lot can see what i mean

 

[imcjayt]

yer I suppose u cld run some ducting off it and see if it will work......

yeah thats the problem lol, the ONLY thing i can use for a passive intake is a 42 hole 6ft off the floor, might just use it with a length of ducting on n let the pressure pull the air thru the ducting


will get some pics up in a sec so you lot can see what i mean

 

[leepy]

nice man...how long u veg?

4wk max m8

 

[imcjayt]

fuk me thay was big for 4 week lol...

 

[Lemon king]

yeah thats the problem lol, the ONLY thing i can use for a passive intake is a 42 hole 6ft off the floor, might just use it with a length of ducting on n let the pressure pull the air thru the ducting


will get some pics up in a sec so you lot can see what i mean

warm air rises and cold air drops so it would be ok, you would need to have a small 10inch fan or 2 pushing the air up from below the plants though.

and at 6ft i would think the filter would pull it straight out before it could drop.... could you not run ducting from the 6ft high hole and down to the floor were you can attach the intake fan to pull the air through......

you can box the fan as well to make it silent as below.....

https://www.thcfarmer.com/community/threads/diy-sound-proof-box-to-silemnce-your-inline-fan.46564/

 

[imcjayt]

I don't have any isolating fan or nothing......

warm air rises and cold air drops so it would be ok, you would need to have a small 10inch fan or 2 pushing the air up from below the plants though.

and at 6ft i would think the filter would pull it straight out before it could drop.... could you not run ducting from the 6ft high hole and down to the floor were you can attach the intake fan to pull the air through......

you can box the fan as well to make it silent as below.....

https://www.thcfarmer.com/community/threads/diy-sound-proof-box-to-silemnce-your-inline-fan.46564/

 

[leepy]

https://www.rollitup.org/grow-room-design-setup/721450-my-super-stealthy-underground-grow-3.html

 

[imcjayt]

suppose dippends on your setup tho.....

 

[Saerimmner]

Well this is the cupboard, intake is the hole in the back wall above the cooltube, thinking of attaching a length of ducting and running it down the back left hand corner of the room where the fan currently is to about 2ft off the floor and hoping the pressure pulls the air thru n down the ducting

 

[imcjayt]

hmm dunno if u would get enuff pressure off that small hole esp if running ducting off it down to the floor....isent there any way u can cut a 4 inch of 6 inch hole at the bottom somewere and cover it with a metal grate cover ect so dosent look so obvious.....say coming from left wall or wall at the back were that 4 inch hole is?.....whats behind those 2 walls...one at the back and one on the left......

View attachment 2863996 Well this is the cupboard, intake is the hole in the back wall above the cooltube, thinking of attaching a length of ducting and running it down the back left hand corner of the room where the fan currently is to about 2ft off the floor and hoping the pressure pulls the air thru n down the ducting

 

[imcjayt]

also were u planning to filter out?

 

[Saerimmner]

hmm dunno if u would get enuff pressure off that small hole esp if running ducting off it down to the floor....isent there any way u can cut a 4 inch of 6 inch hole at the bottom somewere and cover it with a metal grate cover ect so dosent look so obvious.....say coming from left wall or wall at the back were that 4 inch hole is?.....whats behind those 2 walls...one at the back and one on the left......

Behind the left n back walls is my daughters bedroom so thats a no go, only place I could do it is on the right hand side wall that goes into our bedroom but thats even more time n expense i cant afford

 

[imcjayt]

bedroom wld be a good idea.....mate the hole aint got to be perfict....then cover with a metal frill few sqid from screwfix or sommert job done........

 

[imcjayt]

frill....lmao ment grill