Moflow
Well-Known Member
@TreeWalker what size of an area are you looking to cover?
The Chinese Quantum Board Knock Off Builds
- Thread starter zypheruk
- Start date
TreeWalker
Member
50% of a 5x5 tent (actually 4x4 but I have 5x5 in the middle...long story haha) I have another COB set up which draws 260w performing quite well or a 400w HPS & MH which can share that space.
My goal is to light that space at 900-1200w HID equivalent. Dimming is desired to get to less light when needed. Height is a definite issue in tent w. slightly less than 6 feet. So the COB set up at 260w (which can run @ 130w if I want) + this Quantum board at 240w is 500w LED power draw. To me that puts me around 1000w HID equivalent by my estimate, yet with the ability to dim down if needed.
But if these quantum 288's work well I would eventually buy another and use the quantums only at 480watts total. Hopefully that all makes sense.
Last edited:
wingerdinger
Well-Known Member
did you end up getting the light bar ?
wingerdinger
Well-Known Member
I was thinking about trying there 10 bar fixture, if your 600watts fixture is 450watts at 6 bars. would that make 10 bars 750watts?
Do you have a lux meter to test if the mapping is the same as what they sent you ?
TEKNIK
Well-Known Member
Is Samsung selling 3030 reds now or is it Sumsung red leds?The kit has arrived! Took a minute to ship out, was waiting on stock, but holy DHL! Left China Sat AM and was at my door Monday!
View attachment 4294508
Something sketchy about the stickers on their drivers. Why paste "LED DRIVER" over the MW logo? Cheap adhesive, too. I started peeling one of the S/N stickers off as well. Can anyone validate authenticity?
View attachment 4294509 View attachment 4294510 View attachment 4294512 View attachment 4294513
I dont know LED diodes very well but they sent a promise of authenticity lol its not signed
View attachment 4294514
Heres the diodes
View attachment 4294515 View attachment 4294516
Instructions say wire in paralell. Anyone got photos of a 3 board parallel build with neat tidy wiring? Struggling trying to figure it out.
View attachment 4294519
Dairy Queen/1000w hortilux/GH Flora
I did yes, it's currently en route. Should be here by Monday.
Please note he did not get the light from nalite, he got it from Weii, it is a different company. I ordered the 10 bar light, each bar is run at 80 watts and inside the driver box unit there are 10 drivers for each bar.
WeedSexWeightsShakes
Well-Known Member
I’ve been thinking of getting a lux meter. Maybe I’ll order one soon and test the 6 bar. I’ve been debating about buying a meter for awhile now.
Lux or quantum sensor?
WeedSexWeightsShakes
Well-Known Member
Quantum sensor sounds expensive? lol
Oh it sounded as if you wanted to measure the PAR.
wingerdinger
Well-Known Member
u can kinda work out the ppfd by dividing the lux
WeedSexWeightsShakes
Well-Known Member
You high lol I only spoke of lux meter.
It would be cool to have a par meter tho but I can justify spending that much money on a damn meter. Lux meter tho is more reasonable. And like wing said you can get a general idea by converting.
Nope, not high
.
TEKNIK
Well-Known Member
I am thinking of starting a database of horticulture lighting products testing. I have been lurking on this forum for quite a while and I see alot of BS.
I own a pretty good test machine that will give me proper readings and reports of lights. I could also include in the database IES files so people could simulate a grow room on thier computer before purchasing anything using a free program called Dialux
My only issue is I would need people to send me lights to be tested.
Is this something that would interest others?
I own a pretty good test machine that will give me proper readings and reports of lights. I could also include in the database IES files so people could simulate a grow room on thier computer before purchasing anything using a free program called Dialux
My only issue is I would need people to send me lights to be tested.
Is this something that would interest others?
WeedSexWeightsShakes
Well-Known Member
DesertPlants
Well-Known Member
I am pretty sure legit Meanwell HLG-320H-48B drivers do not have any adjustment holes on them since the adjustment is handled via the wires.The kit has arrived! Took a minute to ship out, was waiting on stock, but holy DHL! Left China Sat AM and was at my door Monday!
View attachment 4294508
Something sketchy about the stickers on their drivers. Why paste "LED DRIVER" over the MW logo? Cheap adhesive, too. I started peeling one of the S/N stickers off as well. Can anyone validate authenticity?
View attachment 4294509 View attachment 4294510 View attachment 4294512 View attachment 4294513
I dont know LED diodes very well but they sent a promise of authenticity lol its not signed
View attachment 4294514
Heres the diodes
View attachment 4294515 View attachment 4294516
Instructions say wire in paralell. Anyone got photos of a 3 board parallel build with neat tidy wiring? Struggling trying to figure it out.
View attachment 4294519
Dairy Queen/1000w hortilux/GH Flora
Light setup
Pros :
Solid build quality , this thing is heavy and feels very well put together
Insanely bright
Nice control panel
Cons
You can feel a slight current in the frame, similar to the old MacBooks, unless it’s just mine that does that lol.
The percentage for the brightness is printed inreverse 50% is actually 100%
The hanging system isn’t bad with the exception of those shitty, what seems to be defacto hanging wires.
I suspect they’re not S6 diodes.
Otherwise the light is awesome.
Pros :
Solid build quality , this thing is heavy and feels very well put together
Insanely bright
Nice control panel
Cons
You can feel a slight current in the frame, similar to the old MacBooks, unless it’s just mine that does that lol.
The percentage for the brightness is printed inreverse 50% is actually 100%
The hanging system isn’t bad with the exception of those shitty, what seems to be defacto hanging wires.
I suspect they’re not S6 diodes.
Otherwise the light is awesome.
Attachments
TEKNIK
Well-Known Member
Just a note, when I was in China at a lightning fair last year I saw alot of fluence knock off's, beware if the lights look too much like fluence as customs maybe able to seize a copy. Quality of them was terrible in comparison to an actual fluence light also