Stealth Storage Cabinets on Wheels - CF Grow 200w COB LEDs, Hydro DWC Perpetual

I did a lot of research on them before I pulled the trigger on it. They have a very good reputation on eBay...perfect I believe actually and we emailed back and forth a while before I committed. I have the 8x14 filter in a 3x3 tent that is in a 8x20 sealed room. It's been going none stop for 8 months and scrubs the entire room and not even a hint of smell.
 
I'm subbed in on this too getting ideas for my cab and hopefully I can help toss around ideas for yours. If you need any layout/design help let me know...
 
Cabinet #1 Day 5 Flower, 2 Northern Lights from clone.

Keep in mind this cabinet isn't finished. I feel that it might actually be best to tweak things as you go to see what works and what doesn't. I will be building the scrog for this cabinet in the next day or so, I'm procrastinating and it is overdue.
 

Attachments

  • cabinet1_NL1.jpg
    cabinet1_NL1.jpg
    2.3 MB · Views: 58
  • cabinet1_NL2.jpg
    cabinet1_NL2.jpg
    2.2 MB · Views: 59
  • cabinet1_NL3.jpg
    cabinet1_NL3.jpg
    1.5 MB · Views: 60
Well I ended up building a carbon filter to fit these fans for Cabinet #1. It isn't as pretty as I imagined... we'll see how well it works with smell and airflow.

I sawed a piece of PVC fence panel into the shape of the outside fan housing and then sawed a 4" PVC coupler in half to make an area for the carbon pellets to go after cemented together. I had some issues with the cement due to the temperatures, but it worked eventually. I hot glued just in case, and sprayed over it with black spray paint. I then filled pantyhose with the activated carbon pellets and secured them inside the PVC... with more pantyhose. I might have layered it too much for airflow, so I may change this up a bit before I install it.
 

Attachments

  • PVCfencepanel.jpg
    PVCfencepanel.jpg
    1,005.7 KB · Views: 30
  • PVCfencepanelcut.jpg
    PVCfencepanelcut.jpg
    1.1 MB · Views: 30
  • PVCcouplershalf.jpg
    PVCcouplershalf.jpg
    1.1 MB · Views: 29
  • positioning.jpg
    positioning.jpg
    1.1 MB · Views: 28
  • PVCcemented.jpg
    PVCcemented.jpg
    1.2 MB · Views: 30
  • PVCcementedglued.jpg
    PVCcementedglued.jpg
    916.6 KB · Views: 29
  • PVCpainted.jpg
    PVCpainted.jpg
    1.1 MB · Views: 30
  • carbonin.jpg
    carbonin.jpg
    874.7 KB · Views: 30
  • carbonin2.jpg
    carbonin2.jpg
    766.8 KB · Views: 29
  • carbonin3.jpg
    carbonin3.jpg
    948 KB · Views: 29
Well I finally got my lazy ass to the hardware store and built a $3 PVC scrog. Scrog installed... now I need to buy another fan for the canopy. Let the training begin...

That is one sweet ass cabinet.... Very tidy and nice.
Great job !
 
Looks great! Coming together real nice. Plants look very healthy.

What size squares did you go with on your scrog?

Pretty sweet ingenuity on the filter.
 
Another compact filter would be Foothill Filters on eBay. They make a carbon filter with a fan built into the filter. Their 6x14 would work great in a cabinet. https://m.ebay.com/itm/ELIMINATES-U...827013?hash=item25858440c5:g:CdoAAOxy3zNShxZ-
I have their 8x14 in a 3x3 and it does a great job. The 8x14 is not quiet but probably wouldn't be bad with a muffler.
This works in your system? Anyway to throttle back the fan speed? Is that a computer fan?

BTW op.. Nice setup!
 
It works great. It's an oversized computer fan. I think the brand fan they use is Rotron. No speed controller but I'm sure it can be done. I wish I got the 6x14 instead of the 8x14. I went bigger because I was skeptical. A 6x14 hooked to a muffler would be great in a stealth cab.
 
This works in your system? Anyway to throttle back the fan speed? Is that a computer fan?

BTW op.. Nice setup!
It works great. It's an oversized computer fan. I think the brand fan they use is Rotron. No speed controller but I'm sure it can be done. I wish I got the 6x14 instead of the 8x14. I went bigger because I was skeptical. A 6x14 hooked to a muffler would be great in a stealth cab.
 
It works great. It's an oversized computer fan. I think the brand fan they use is Rotron. No speed controller but I'm sure it can be done. I wish I got the 6x14 instead of the 8x14. I went bigger because I was skeptical. A 6x14 hooked to a muffler would be great in a stealth cab.
I've actually got a computer fan speed controller... Got it from coolerguys.com. I wish they made a 4" version of that. I'm trying to go low speed on 16 cf and I think even a throttled 4" is to much lol.
 
I know this is an old thread, but this is the type of setup im trying to do for some stealth. How did you cut in to the metal cabs for ventilation? Sorry to open up an older thread
 
Back
Top