• Here is a link to the full explanation: https://rollitup.org/t/welcome-back-did-you-try-turning-it-off-and-on-again.1104810/

Stealth Closet Ventilation Help!! (Pics Inside)

pazuzu420

pazuzu420

Well-Known Member
Look as if you'd be better of putting the inline at the top of cabinet blowing out and the booster fan drawing in. Although, most of the time if you have an adequate exhaust fan you don't need a intake fan as you can just intake air passively. Right now it looks like you have positice pressure in your grow space, does it push the door open?
You want exactly the opposite of that. You want Negative pressure in your cabinet so that the door sucks in slightly, you can always check by going near a small crack with you lighter and the flame should be sucked in and extinguised.

The duct booster CFM rating is it's free air movement with NO resistance. If you add any resistance to that fan say a carbon filter it will quickly burn up as it is not designed to do that kind of work.
 
J

joe dollar

Well-Known Member
could cool tube that light or even throw some frozen just infront of the fan to try bring temp down a little. Is that 4 in inline bringing air in from anywhere?
 
Withthebiscuit

Withthebiscuit

Well-Known Member
pazuzu420 said:
Look as if you'd be better of putting the inline at the top of cabinet blowing out and the booster fan drawing in. Although, most of the time if you have an adequate exhaust fan you don't need a intake fan as you can just intake air passively. Right now it looks like you have positice pressure in your grow space, does it push the door open?
You want exactly the opposite of that. You want Negative pressure in your cabinet so that the door sucks in slightly, you can always check by going near a small crack with you lighter and the flame should be sucked in and extinguised.

The duct booster CFM rating is it's free air movement with NO resistance. If you add any resistance to that fan say a carbon filter it will quickly burn up as it is not designed to do that kind of work.
Click to expand...

how would i be able to hook my vertex to my doorr liekt he duct booster?
 
You must log in or register to reply here.
Top