socket and plugg help

i was just wondering would i be able to hook up a light socket

to a chord that i can plug into the wall.. if so can i hook up 2 or 3.. and how??

how many and what kind of lights and wattage

highwayman said:

i was just wondering would i be able to hook up a light socket

to a chord that i can plug into the wall.. if so can i hook up 2 or 3.. and how??

Click to expand...

Homie they're already ready already!!! go to Lowes, you'll spend about 5 and change for a socket/chord (plugs into reg. socket) it also comes with a reflector!


~~~TLB~~~

23watt bulbs are going in them and i was thinking of putting 2 sockets per chord

the reason i asked is if they get hot it`s plastic so not to good. you should be ok with those. just run your positive and negative to the correct pins on the socket then run another wire from one to the other. so the power goes into one socket and then from that one to the other one. or you could just get a bathroom light set with 3 or 4 sockets already wired, just run the plug

ok here's just an idea that i did follow the link ill post at the end.
get u some y-adaptors can hold 2-bulbs a socket.$2.48.
get a cord with bare leads,
get a 3-spot or even a 4-spot light strip u can find in the fixture department at lowes,my 3-spot was all prewired besides the cord. sockets etc was done and costed $10 totall.
here's da link hope it help's
https://www.rollitup.org/indoor-growing/97908-building-cfl-hood-help.html

i was just wondering would i be able to wire those sockets to a plug and just mount them onto a peice of plywood??

highwayman said:

i was just wondering would i be able to wire those sockets to a plug and just mount them onto a peice of plywood??

Click to expand...

yes just go get a cheap $1 extension cord and cut off the female end and strip a lil bit of the insulation off the end and then just wire it up..very easy..i just did it and made the lights that were featured in the book "Buds for Less:Grow 8 ounces for less than 100 bucks" great book you should check it out.. hope that helps

sweet i'll wire them some time this week