Hi,
I'm having trouble with smell leaking from the groom. I use an 8'' Rhino Filter (rated for the Correct fan) and RVK 8'' L1 Fan on a climate controller, also an RVK 6'' L1 Intake fan, and small passive intake to stop too strong negative pressure. The main fan is sucking the air through the filter and pushing through about 6m of ducting outside.
Room is: 2.9m x 2.75m x 2.5m (LWH)
There seems to be a faint smell leaking from duct exit point outside, the filter and fan are new and I can't figure out what's happening?
I'm thinking extraction could be oversized, but it's run on a climate controller and only usually runs from 30%-90% max speed.
Humidity is at 55-62% during daytimes when smell was noticed and rises a bit more at night.
Can't find any leaks in ducting either.. dodgy filter possibly?
Or fan speed running too low?
Any help would be appreciated thanks
I'm having trouble with smell leaking from the groom. I use an 8'' Rhino Filter (rated for the Correct fan) and RVK 8'' L1 Fan on a climate controller, also an RVK 6'' L1 Intake fan, and small passive intake to stop too strong negative pressure. The main fan is sucking the air through the filter and pushing through about 6m of ducting outside.
Room is: 2.9m x 2.75m x 2.5m (LWH)
There seems to be a faint smell leaking from duct exit point outside, the filter and fan are new and I can't figure out what's happening?
I'm thinking extraction could be oversized, but it's run on a climate controller and only usually runs from 30%-90% max speed.
Humidity is at 55-62% during daytimes when smell was noticed and rises a bit more at night.
Can't find any leaks in ducting either.. dodgy filter possibly?
Or fan speed running too low?
Any help would be appreciated thanks