Slappy's Perpetual LED Hack Discussion

anyone needing a mars 400 or 900 led panel (the actual part with the leds att'd)Not the whole thing to be clear , let me know
these all function great so I'm not hackIn dead or dying Mars here lol
 
Last edited:
Abiqua said:
Did they mount the sinks to backing plate?

Have you tried to weigh those bad boys yet? :joint:
Click to expand...
yeah tons of silver grease screwed real well
all & all these are put together not bad they are one of lowest but best price levels one had if u needed light options a year ago & didn't have a thick wad like me !
 
i'll take one off tomorrow , I was in the living room doing that
with all that grease next time the garage
 
how much % bigger is 3590 cob from a 3070 cob ?
I got some 3070 holders from GG just now , need a guess on how much
so I can wrap my head around sizes I do better with part in hand
& there been a delay on AU 3590 shipment , not happycamper
 
I will pop a driver open & get some Pix of those guts

looks like I can pry a back off them easy peasy without any damage
 
Ok that clicks now that I have a BJB 3070 holder in my hand ,
now I have a relative size my mind has it's head around size of the different cobs
the 4 each bars 34" long 3/16" x 3" AL bar stock I have on hand might just work with these sinks , a 3590 COB should will easily fit that 4" wide bar stock ??

, edit corrected my sizes
 
Last edited:
did so i did some close up pix of the Mars2 driver guts
the driver has pins for the fan soldered to the pcb
I post pix after the NFL games
 
REALSTYLES said:
Each 1 on my 1200w panel weighed 673 grams each and the drivers can run 1 72v or 2 36v off each driver 700-750ma rated.
Click to expand...

nice dude! thank you for that....big ups

That means that weight wise they are equal to the weight of 2x Arctic 10+.....I think each plug came out to 360-80 grams sans fan and wiring....that's f'ing crazy for whatever 1200watts actually drew :) probably still 700? on the equivalent of 2 Arctic 10's...Holy shit
 
Fastslappy said:
Mars II @ driver Open View attachment 3582261 View attachment 3582262 View attachment 3582263 View attachment 3582265 View attachment 3582266 View attachment 3582268 View attachment 3582261 View attachment 3582262 View attachment 3582263 View attachment 3582265 View attachment 3582266 View attachment 3582268 View attachment 3582261 View attachment 3582261 View attachment 3582262 View attachment 3582263 View attachment 3582265 View attachment 3582266 View attachment 3582268 View attachment 3582261 View attachment 3582262 View attachment 3582263 View attachment 3582265 View attachment 3582266 View attachment 3582268 View attachment 3582261 View attachment 3582261 View attachment 3582262 View attachment 3582262 gutZ piX
enjoy
Click to expand...
definitely suitable for damp environments....
 
Abiqua said:
nice dude! thank you for that....big ups

That means that weight wise they are equal to the weight of 2x Arctic 10+.....I think each plug came out to 360-80 grams sans fan and wiring....that's f'ing crazy for whatever 1200watts actually drew :) probably still 700? on the equivalent of 2 Arctic 10's...Holy shit
Click to expand...
It was 671w from the Mars 1200w lol
 
in any way the plastic case the drivers are in has no VENT & those r some large sink inside the pwr sply so there is heat in there
I could see why these mars fail the cooling is not well planned out , but no regrets (only a small one but I wasn't keen on riu at that moment ) I did a great gro with them , the power bill was a adjustment lol
 
there's a part # on them this one the # is smudged to find the p/n
i will pop some more open once I start the hacks
& as mc30p pointed out moisture is a issue , I'll address that or not not gonna stress on that right now but will keep that in mind
 
I got my DHLtracking # from Cutter finally great deal but a hassel with them not informing me about the holiday closure
really don't get the week after the holidays you take a week ? seem a electrical supply would want to fill orders after a major holiday but that's downunder i guess , read the fine print on their terms of service Before you order
alotta things are not clear as the paypal fee , no free shipping international with paypal or not (actually more shipping $ with paypal ) they reseve the right to source for 2 days (not in stock to you & me ) Cree AU ships to cutter 2 days
anway we'll see when they get here 12 each 3590 3500K the whole kit cob , holder , pad , reflector great price
 
I was just about to pull the trigger on a doz artic 11 CPU coolers tonite for the 3590's
I want to get a light assy up Now !
But I then Dbbl checked fleabay & found 12 cpu coolers used but these have the heat pipes on them & they came outta a sever too as they have wings & large bolt slots they were just $3bucks & pennies for each I'll be able to bar mount easy peasy
that was shipping as well
 
the A/C64's are on the way Amazon some ebay newegg , a few randon a/c64 auctions I have over 30 on the wway
I figure that a 3590 holder mounted on a A/C64 is a valuable product
so i'll figure I need 30ish units to get the room converted the fastest (knowing myself & my constraints,skills )
I have 80/20 10 series 1" bars to mount the Ac64 to
Hard mouunted they will be bolted I'm thinking a single large stud/bolt taped into the side of the cooler
& maybe a option to be able to aim each cob at will , that'd be useful at the walls as I could run lite/cob at the ceiling/wall edge aimed in slightly you'd get a angle going into the canopy ?
 
You must log in or register to reply here.

Similar threads

l0wbob2016
DIY watercooled photosynthetic-research LED-Lamp completed build, tell me what u think
4 5 6
Replies
118
Views
12K
l0wbob2016
l0wbob2016
BornGreen1987
CXB3590 Setup Questions
Replies
8
Views
1K
SimonBarSinister
SimonBarSinister
HydroRed
Another 200W LED COB Build....
2
Replies
32
Views
5K
HydroRed
HydroRed
dsmer
opinions on diy COB led
Replies
7
Views
2K
mahiluana
mahiluana
Back
Top