Show us your home made bong
- Thread starter bursto
- Start date
farmingfisherman
Well-Known Member
No picture but for years I used a honey bear with a brass bowl. Every year or so we'd go threw a bottle of honey and make a new one.
farmingfisherman
Well-Known Member
Any kind of melon also works well.
Buddy of mine did that forever ago with pawg cases and plastic tubingwas hoping someone made something ridiculous with double chambers n stuff
PadawanWarrior
Well-Known Member
I did but didn't take any pics. I'd buy the 2" acrylic colored tubing by the foot and flat pieces from their scrap bin at a plastic store and then go to the head shop for bases, mouthpieces, grommets, and stem pieces. I made all kinds. 2 chamber, 3 chamber, and ones that would go from 3 to 2 to 1. Steamrollers too. I gave most away to friends. That was like 25 years ago and don't have them anymore. Still have a couple bases and that shit though, lol.was hoping someone made something ridiculous with double chambers n stuff
I made glass pipe cases too, but the cops got the last ones I made.
Best one we ever had was a trophies with the top screwed off and a metal pen housing shoved though the side. A squirt gun cap covered the hole so we could take out the downstem plug it up and screw the trophie top back on
tstick
Well-Known Member
Initially, the local record store sold "head" stuff like those bright-colored acrylic bongs with the aluminum stem and screw-in snap bowl. I think I went through three or four of those. They all ended up leaking stinky bong water everywhere. But after they broke, I'd save the stem and bowl and use them with a plastic plant sprayer bottle. Those lasted for a lot longer and each time I made a new one, it had a little bit better design. They were cheap and disposable.
I didn't buy any glass until the last 10 years or so. I actually liked the way those old aluminum stem snap bowls pulled...can't get the same feel with glass.
The weirdest pipe was one that a friend of mine made from a wooden box, some brass nuts and an aquarium valve thing that you could adjust for the flow.
I didn't buy any glass until the last 10 years or so. I actually liked the way those old aluminum stem snap bowls pulled...can't get the same feel with glass.
The weirdest pipe was one that a friend of mine made from a wooden box, some brass nuts and an aquarium valve thing that you could adjust for the flow.
go go kid
Well-Known Member
top, nearest pic i can find to it, the underneath pic is the bottle it was made from. i used a diamond core drill to make the hole in the raised and oval name plate. we used to use a dart to chip a hole in it, but many a bottle was broken if you wern't carefull and patient. we used a length of copper pipe for cold water, 15mm bore and used a push down ground coffee maker fine mesh disk to cut small mesh disks out of to bung down the pipe. it was held in by blue or white tack, depending on what was around. but the police took it
next time im useing my ultrasonic drill to make life simpler.
Last edited:
Laughing Grass
Well-Known Member
DarkWeb
Well-Known Member
Laughing Grass
Well-Known Member
DarkWeb
Well-Known Member
Laughing Grass
Well-Known Member
A lamp that no one wants
You have a lot of insight in this photo.
DarkWeb
Well-Known Member
raratt
Well-Known Member
Laughing Grass
Well-Known Member
I wonder wth is hidden in camouflage behind the old spice
Ask Alexa
