Rip's 3,200 watt sealed shed w/co2 -medical grow-
- Thread starter quickrip
- Start date
quickrip
Active Member
Ah yes my mistake. haha it just seemed right for some reason. I stand corrected.Damn man, that canopy looks great. You really are a quick learner man. very very nice work. Oh and I think you should re-phrase this quote to HER."I think im gonna support him with a stick soon."
I wish I was experienced enough to have a preference, but no I just took cuts that had at least two nodes already. I took what looked to me like the clones that you would get at the collectives. I guess thats about 4 to 5 inches tall. Seems to be doin the trick this time around. Imk glad too cause the last few trys I think only half or even less survived. I attribute that to the humidifier.
quickrip
Active Member
The girls are groing like crazy out in the shed. I was only going to trim underneath the screen tonight, but they are stretching so much that I have to keep moving the tops around to keep them even and low. Due to limited height from the screen to the lights I cant just let them go up. With the pk I cant pull the branches under and move them to the next screen square, or they will break. So instead I use wire ties to bend them over sideways. The green crack however is twisted, bent, and wrapped inti and around itself many times over. It can handle just about anything. I have to say though the pk is a much more beautiful plant, with the bigger fan leaves and deep green coloring.
The cuttings are all doing well and look healthy. It is a very nice change of pace for me. Usually about this time I have a buch of wilted looking cuttings and am losing a few here and there. It looks as though I just may get 100% sucess this time, and if not very close to it.
Heres a couple pics of the screen full as hell just after tucking and tieing. Also one shot up the girls skirts all cleaned up and lookin good.
The cuttings are all doing well and look healthy. It is a very nice change of pace for me. Usually about this time I have a buch of wilted looking cuttings and am losing a few here and there. It looks as though I just may get 100% sucess this time, and if not very close to it.
Heres a couple pics of the screen full as hell just after tucking and tieing. Also one shot up the girls skirts all cleaned up and lookin good.
BlackRoses
Well-Known Member
I c nice thick stems there
quickrip
Active Member
I c nice thick stems there
Thanks guys Ill post some more under the screen shots soon.Nice lookin stems. Those girls look thick Can you post few more of these?
quickrip
Active Member
changed the res out today with full flower nutes for the first time. I have been running veg nutes up until now. All the ladies look super happy and green. I think taking the good advice of waiting on the flower nutes was a good plan. Now Im hoping that they dont get too close to the lights. heres a few pics of the girls. The first three are the under canopy shots that you asked for bdub.
purple kush:
green crack:
All the clones are doing great. So far I only lost one out of 48.
purple kush:
green crack:
All the clones are doing great. So far I only lost one out of 48.
notoriousb
Well-Known Member
...........
quickrip
Active Member
thanks for that one dude............
#1Raiderfan420
Well-Known Member
Lookin real good man. I love the fatty stocks
quickrip
Active Member
thanks, yeah theyre like little tree trunksLookin real good man. I love the fatty stocks
quickrip
Active Member
Ive had some problems over the last week. I switched to full flower nutes a week ago and I think I was at a toxic level for something in particular. I dont think that I was at too high of ppm cause I was staying very consistant with my levels and calibrations of meters. Here is a list of what I was using together. maybe some of you will have a better idea of what two additives arent compatible.
1-gh 3 part flora series
2-cal mag
3-liquid karma
4-diamond nectar
5-roots: from humboldt nutes
6-superthrive
(all of the above were used through veg at the same levels as now)
(all below are added to the previous mix. all additives are added to ro water first and gh 3 part added after to bring mix to desired ppm level)
7-big bud from advanced
8-carbo load
9-sweet
Thats the list if anyone has an idea on what went wrong let me know. For now I flushed for two days and went to a mider strength mix of just gh 3 part and big bud. The plants definitely were affected by the nute toxicity but not to bad. One plant really was hurt bad and still hasnt recovered. I dont think any of the green crack showed signs of burn at all but the purple kush has burnt leaves on all plants.
heres some shots of the grow. also some of the new round of green crack only. all of my clones tok root this time so that was awsome. I had to giveaway 30 of the 48 clones that I took to patient friends of mine. (punn intended
)
and the one plant that was badly hurt, My poor baby girl!
1-gh 3 part flora series
2-cal mag
3-liquid karma
4-diamond nectar
5-roots: from humboldt nutes
6-superthrive
(all of the above were used through veg at the same levels as now)
(all below are added to the previous mix. all additives are added to ro water first and gh 3 part added after to bring mix to desired ppm level)
7-big bud from advanced
8-carbo load
9-sweet
Thats the list if anyone has an idea on what went wrong let me know. For now I flushed for two days and went to a mider strength mix of just gh 3 part and big bud. The plants definitely were affected by the nute toxicity but not to bad. One plant really was hurt bad and still hasnt recovered. I dont think any of the green crack showed signs of burn at all but the purple kush has burnt leaves on all plants.
heres some shots of the grow. also some of the new round of green crack only. all of my clones tok root this time so that was awsome. I had to giveaway 30 of the 48 clones that I took to patient friends of mine. (punn intended
)and the one plant that was badly hurt, My poor baby girl!
notoriousb
Well-Known Member
damn man, sorry to see your lady like that 
i couldnt give much insight on the nute mix cuz i dont use any of the ones you do.
but the rest are lookin real prime
and let me know if you need any more grower friends to pass clones along to because Im a known clone killer lol
i couldnt give much insight on the nute mix cuz i dont use any of the ones you do.but the rest are lookin real prime
and let me know if you need any more grower friends to pass clones along to because Im a known clone killer lol
#1Raiderfan420
Well-Known Member
Damn Brotha, hate to see that. It looks like lock-out that is causing a major deficiency. I would flush asap if you haven't already. I really don't know anything about the Flora, but I have used everything else but the carbo load which I believe does the same thing as the big bud, but not positive. Did you re-check your ph again after you added the additives? Usually a lockout that drastic is from a large ph swing.
BlackRoses
Well-Known Member
Lucky only one was affected, the rest look incredible though!
quickrip
Active Member
Ill do that NB Im sure Ill have extra in about 1 1/2 monthsdamn man, sorry to see your lady like that
but the rest are lookin real prime
and let me know if you need any more grower friends to pass clones along to because Im a known clone killer lol
Yeah I checked the ph and it was all good. I then flushed for two days and fed lightly for the next two and now aIm at full strength again. Right now they seem happy so Im rollin with just the 3 part and big bud until end of next week, then Ill add the big up powder and carbo load for the last three weeks and no more big bud.
Thank you BR I got pretty lucky catching it in time.
quickrip
Active Member
By the way Nb if you see next round that Ive already got clones rollin and Im too much of a stoner to offer you any please mention to me that you would like some. I might forget but that doesnt mean that I dont want to give em up. They will be tossed out if no one takes the leftovers.damn man, sorry to see your lady like that
but the rest are lookin real prime
and let me know if you need any more grower friends to pass clones along to because Im a known clone killer lol
#1Raiderfan420
Well-Known Member
Oh, I didn't realize it was only one plant. I thought they all were effected, in that case I may we off base. Sounds like you did what I would have done though as far as the flush and re-building the nutes back up.
notoriousb
Well-Known Member
Don't worry, i'll remind you
I appreciate it though man. Im always in need of clones and paying $15 a clone from the club to only have them infested with mites or PM is kinda a kick in the teeth. I just need to hone in and step my cloning up. Ive tried rw, rooter plugs and bubble cloning and can get a couple to root here and there but its always such a low rooting success rate, idk what my deal is! haha but yea man we'll definitely keep in touch