MARS leds can pull big GPW!!

dionysus4 said:

on that note this one deserves a mention
http://www.ebay.com.au/itm/131688162412?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1555.l2649
although on this ebay listing at least the specs are listed

Click to expand...

note that thick assed AL plate that's ground off at a angle (don't know if that's good or not )the grinding off part
myself I'd cut groves instead

Hoping to convert one of their eBay 60x5 300w models.

Ripped open one and snapped some photos. My electrical knowledge is lacking, but it looks like 2 60w 55-100v 700mA-750mA drivers with 2 outputs. The 12v DC fan is 350mA, so it's getting double the juice?

I'd like to put 2x cxb3590 72v in here, 4 36v would be more ideal, but the 72vs cut the initial cost by ~$120 at the sacrifice of 1600lumens. Not a huge sacrifice. Area would be for a 2'7"x2'7" tent, 6.7 sq ft, would cut light electricity in this tent by 300w, and keep about the same lumens I have now.

So it's possible to pollish a turd?

captainmorgan said:

So it's possible to pollish a turd?

Click to expand...

I think myth busters proved it.


Sent from my iPhone using Tapatalk

Growmau5 said:

wow , what an odd setup. heres what i see
( 4 ) x 100v // 600ma drivers: too small for 3x cxb or vero. consider 2 x cxa/b 3070 or 3590, vero29 fill remainder of Fv with any monos (630,660nm)
( 1 ) x 12v // 1000ma driver : too high for 'most' monos, consider cree xml2 or xpl high kelvin as blue supplement, will run 3. (possibly 4 in practice. )

Click to expand...

Couldn't I run 4 of these as suggested by @Rahz (one off each driver):
http://www.digikey.com/product-deta...0R0HCB30G/CXB3590-0000-000R0HCB30G-ND/5124980 <---72v cxb3590 @3000K
This is for a 2'x2'x6' space, maybe a little overkill.

I was hoping to find a cheaper version of 72v cx's, because at $64.60 a piece i might as well start fresh. I was hoping to keep my budget under $180.

SamsonsRiddle said:

Couldn't I run 4 of these as suggested by @Rahz (one off each driver):
http://www.digikey.com/product-deta...0R0HCB30G/CXB3590-0000-000R0HCB30G-ND/5124980 <---72v cxb3590 @3000K
This is for a 2'x2'x6' space, maybe a little overkill.

I was hoping to find a cheaper version of 72v cx's, because at $64.60 a piece i might as well start fresh. I was hoping to keep my budget under $180.

Click to expand...

Check out Kingbrite they have great prices

SamsonsRiddle said:

Couldn't I run 4 of these as suggested by @Rahz (one off each driver):
http://www.digikey.com/product-deta...0R0HCB30G/CXB3590-0000-000R0HCB30G-ND/5124980 <---72v cxb3590 @3000K
This is for a 2'x2'x6' space, maybe a little overkill.

I was hoping to find a cheaper version of 72v cx's, because at $64.60 a piece i might as well start fresh. I was hoping to keep my budget under $180.

Click to expand...

I got 4 3590 3500k in a 36"x20x60" tent with 80 degree lenses sitting 2ft above i had to turn down to 100w due to light bleaching. Lenses im figuring amplify but if your polishing that mars turd im sure you can up the wattage a bit. Just giving you an idea of how sweet the 3590's are.

REALSTYLES said:

Check out Kingbrite they have great prices

Click to expand...

how do i get into contact with him?

SamsonsRiddle said:

how do i get into contact with him?

Click to expand...

email him [email protected] and give him 24 hours to respond better yet if you email him now he should get back to you in about 6 hours.

http://kingbriteled.en.alibaba.com/

didnt quite get the point of what we are trying to do. but they are trying....

"lets just pull the board out and put some cobs in"