Airwalker16
Well-Known Member
Oh okay well that's better than all 730Osram 660 + 3000k lm301b
Oh okay well that's better than all 730Osram 660 + 3000k lm301b
They are the mj650 just like the ones you gotWhich one are those? Are you going to check the umol?
Sweet man, once I get mine I'll check the whole room with my friends par meter also. How long did it take to receive them? Did they ship by air or boat? Mine ar by boat, leaving on Tuesday. I feel like it's going to take a while!They are the mj650 just like the ones you got
3500k with osram 660
i will be borrowing my buddies par meter this week at some point and getting some numbers.
I got mine shipped by boat and they were at my door in 25 days.Sweet man, once I get mine I'll check the whole room with my friends par meter also. How long did it take to receive them? Did they ship by air or boat? Mine ar by boat, leaving on Tuesday. I feel like it's going to take a while!
Hey Team,
I am looking to get around 40 fixtures to fill some rooms. Loriflux said they would hook it up with a discount, 875 per fixture.
https://loriflux.com/8blade
Chilled offered 7% off. LoL... barely covers sales tax. But the Chilled is a 1000W
![]()
Growcraft X6 - 1000 Watt DIY LED Grow Light Kit
Growcraft Light Spectrum Options Passive Cooling Linear Bar Design Thin Profile – Only 1.375in Tall Rugged T Slot Bar Design Oversized surface area for maximum heat dissipation Remote Power Driver Location Lower your heat load by removing power driver outside grow area Assembly Instructions...chilledgrowlights.com
The Chilled uses Samsung diodes, and Lori uses Osram. Which one is better, would you get the Loriflux, or can someone recommend i go a different route all together.
You give me hopeI got mine shipped by boat and they were at my door in 25 days.
I’ve designed my own MCPCB it has 3535 foot print of an LED so it could be used with ur favorite LED for horticultural that you find best it has 450nm Cree in them lg 380 UV 660 NM and 630 NM could be mixed with the 660 if you wanted to which that’s what chill did with their first spectrum control lights because they have the same voltage just like royal blue and LG UV have the same voltage along with 730 NM add that as well and each have a different channel to control the spectrum for when growing it can be used for any production of the plant any plant whether you’re growing for a big buds or Resin production or just lettuce let’s say The 3030 LM301B Samsung Dios with a 730 in them and 660 and the LEDs are best for lettuce I design the light to be able to grow any type of plant available so I can market the cannabis growers to the lettuce growers. I’m going to be selling the reasonable compared to HLg they’re 550 LED lights with four boards that sells for 850 mines going to be selling for 700 I’m willing to supply you with the Gerber file my Alibaba supplier that makes just the MCPCB board and you would have to buy your own LEDs of course but we’re just a Gerber file M PCBs you could have someone assemble it and theoretically would be able to supply your own self with as many lights that you would need cheaper than any other option You could possibly fine or if you give me a deadline I could have a produced and just ready to hook up and for duction by me with the price we could come up with and I would provide You the cheapest LED grow lights for your situation then you could ever fine and just the Gerber flow alone you could buy and have a company produced them for you without you doing anything and tell the company what LEDs you would want and theoretically be able to have the LED boards made at the cheapest available option I could provide to you but if you’re not wanting to do a bunch of work I could have the boards made by the deadline you gave me cheaper than anyone elseHey Team,
I am looking to get around 40 fixtures to fill some rooms. Loriflux said they would hook it up with a discount, 875 per fixture.
https://loriflux.com/8blade
Chilled offered 7% off. LoL... barely covers sales tax. But the Chilled is a 1000W
![]()
Growcraft X6 - 1000 Watt DIY LED Grow Light Kit
Growcraft Light Spectrum Options Passive Cooling Linear Bar Design Thin Profile – Only 1.375in Tall Rugged T Slot Bar Design Oversized surface area for maximum heat dissipation Remote Power Driver Location Lower your heat load by removing power driver outside grow area Assembly Instructions...chilledgrowlights.com
The Chilled uses Samsung diodes, and Lori uses Osram. Which one is better, would you get the Loriflux, or can someone recommend i go a different route all together.
If I can find this thread again next weekend when I grab the par meter I’ll post up the numbers I get.Thank you guys so much for all the info! I am still digesting it. The only worry i have with the Alibaba lights is the warranty. I imagine dealing with a company based in China would be a pain. But, then again. The first set of lights i got DIY from chilled have ZERO warranty
Please please please keep us posted on how these are working out for you as well as the PAR results@bk78 @canope
No I just had the MCPCB boards produced in China and I order the LEDs from Digi-Key which you can do as well and with the Gerber file that I made myself and when I send it to you you can have it assembled in the United States by company or if you give me a deadline of when you absolutely need to I could produce them myself which I’ve been doing and sell them to you which I’m based in do United States so it’s basically American made even though the supply For the PCB board itself is from China only to cut costs to pass on to the consumer like you but other than that everything else besides the board is but here in America and I have some spectrum graphs if you want to seeThank you guys so much for all the info! I am still digesting it. The only worry i have with the Alibaba lights is the warranty. I imagine dealing with a company based in China would be a pain. But, then again. The first set of lights i got DIY from chilled have ZERO warranty
Please please please keep us posted on how these are working out for you as well as the PAR results@bk78 @canope
No I just had the MCPCB boards produced in China and I order the LEDs from Digi-Key which you can do as well and with the Gerber file that I made myself and when I send it to you you can have it assembled in the United States by company or if you give me a deadline of when you absolutely need to I could produce them myself which I’ve been doing and sell them to you which I’m based in do United States so it’s basically American made even though the supply For the PCB board itself is from China only to cut costs to pass on to the consumer like you but other than that everything else besides the board is but here in America and I have some spectrum graphs if you want to see
That board looks cool, but i am looking for stips/wings/bar lights. I am not sure what you mean when you say Gerber file. I am assuming you are talking about a custom light spectrum. If this is the case. Does your board then offer full spectral control on multiple channels?No I just had the MCPCB boards produced in China and I order the LEDs from Digi-Key which you can do as well and with the Gerber file that I made myself and when I send it to you you can have it assembled in the United States by company or if you give me a deadline of when you absolutely need to I could produce them myself which I’ve been doing and sell them to you which I’m based in do United States so it’s basically American made even though the supply For the PCB board itself is from China only to cut costs to pass on to the consumer like you but other than that everything else besides the board is but here in America and I have some spectrum graphs if you want to see