canope
Well-Known Member
Can you dim the lights with the Trollmaster?
Loriflux vs chilled
- Thread starter Snob
- Start date
bk78
Well-Known Member
Did you not do any research before spending $15 000? Lol.
I don’t know if you can use a trollmaster man sorry
they have their own dimmer but I never got it
canope
Well-Known Member
LOL I got the PWM dimmer, but the trollmaster looks neater
I am no expert with the trolmaster since i have not gotten one yet. I have played with a few in other peoples production rooms, and it is pretty awesome. There are a bunch of different lighting adapters. I am pretty sure if your lights have that network cable data in/out port, you can hook it to the trolmaster.
The controller does dim lights and is able to do sunrise/sunset as well.
www.trolmaster.com
The controller does dim lights and is able to do sunrise/sunset as well.
Learning
canope
Well-Known Member
How much do you project you will yield per lamp?
bk78
Well-Known Member
Brand new room, whole new environment, likely won’t have the irrigation up and running until next round so my guess is
bout a pound?
Yes full spectrum control each color has its own channel four of them to be exact blue channel has 450 and him with two LG 380 and M LEDs then there’s a 660 NM channel and then the 730 and M channeYes full spectrum control each color has its own channel blue channel has 450 NM with two LG 380 then there’s a 660 NM channel and then the 730 NM.
The Gerber file is what you can send to a manufacturer it shows how the gerber file & how it made and design so the Gerber file you send to a company gives you the board that was in the picture above so I saw you the boards that I have that are blank I have 50 of them with just a little price inflation I’ll would sell and the Gerber well that the company Puts the LEDs on the board also the Gerber file you can send to a company they put LEDs on it by by the manufacturer which would also make board and spectrum control because I designed it and put many hours into making it that’s what I would really be charging for
my plan was to present the board design sell the Gerber file to people that sell knock off boards from China and get cutters electronica to possibly promote the place to get them made because you can send them the Gerber file they located in Australia not China or if you’re in the United States wherever you are in the world have a manufacturer make them in your community where they can be priced at a reasonable high price with what it can do because if you grow lettuce the way LED 3000 K with the high blue spectrum to make the CCT become 4000 Cal then with the 730 NM produces more faster growth moreWay for harvest and people that grow vertically with micro greens having a 480 meanwhile driver with eight of my boards which I would only charge $100 each because of the bulk and it’ll grow lettuce spinach because of the color spectrum it can increase photosynthesis of a plant really any plant with the 660 and 730 Combined with just enough blue add a low wattage prevents stem elongation and from my research I’ve taken the spectrum of the sun during many times of the day like one to 3 o’clock And from my first girl having the rads come on just after half of the 12 hours for flower that you would normally do increases the bud size and then The blue for about three hours one hour before what would be noon sun directly up in the sky has more UV and stuff which I believe increase the Resin production on my plant but it’s really about the Seeds u buy have to be top quality for best Results and the fact that Indica plants grow better at this spectrum I’ve been using compared to sativa I’ve kind of found the best spectrum but that’s why am trying to sell them very reasonable where people can come on here and share the best spectrum they believe that fits their plant Whether it be micro greens lettuce or cannabis it can grow at all I’ve written a book from researchers from from university research that shows what plants require more blue or red or neither like let us in Spanish that just needs 730 NM this way we are One light can grow anything to be very practical and affordable compared to all these other companies I can’t stand the price they’re charging
This is a quarter of what the Gerber file contains I didn’t want to show the whole picture
Airwalker16
Well-Known Member
Airwalker16
Well-Known Member
Whoa whoa whoa now wait a second, WTF is this a pic of? An unfinished board with just Reds on it?
Airwalker16
Well-Known Member
Why does the connection cable have 3 ports on one end but 2 on the other? WTF??? 2 of them actually solder to and share a single pin on the 2 side?
Airwalker16
Well-Known Member
@Snob worst case scenario he could just buy a couple Titan8 timers.
coreywebster
Well-Known Member
Yeah if you want warranty don't go Chinese.Thank you guys so much for all the info! I am still digesting it. The only worry i have with the Alibaba lights is the warranty. I imagine dealing with a company based in China would be a pain. But, then again. The first set of lights i got DIY from chilled have ZERO warranty
Please please please keep us posted on how these are working out for you as well as the PAR results@bk78 @canope
Some of them may honour it , MJ have a funny idea of honouring warranty.
You buy a light with a year warranty and if it fails in 6 month so they give you half the value off the replacement.
I would email lumatek and find out what their lights are marketed under in US. They wont stuff you
Airwalker16
Well-Known Member
Did you guys not see the invoice? He bought em.
And don't make him feel like he should/coulda/woulda done better elsewhere.
The man payed less than $500 per fixture and they're going to kick ass for him. The only thing he has to worry about ever needing warranty, truly, is the driver. It is an Inventronics driver indeed. MeanWell I know, insists on as ding the driver to the dealer to then send to them for RMA. Inventronics may be different. It could possibly be as simple as him sending an email to them, shipping it to them for repair, and he's done.
IF the driver ever Shit out.
And don't make him feel like he should/coulda/woulda done better elsewhere.
The man payed less than $500 per fixture and they're going to kick ass for him. The only thing he has to worry about ever needing warranty, truly, is the driver. It is an Inventronics driver indeed. MeanWell I know, insists on as ding the driver to the dealer to then send to them for RMA. Inventronics may be different. It could possibly be as simple as him sending an email to them, shipping it to them for repair, and he's done.
IF the driver ever Shit out.
It was Just to show everyone an idea of what a finish board would look like by the end of the week I said have some completed I’m just waiting on reflow oven that’s all
bk78
Well-Known Member
Going to have to see a finished, working boards before believe anything.
hybridway2
Amare Shill
The ChilLed but not the 1000w one. Sure, if it came apart like the Amare Bar-8, 900w.
They both have the same spent spectrum.
Highly doubt the Lotrilux is a L/90 rating. Not at a 2.4 umol/j. Not period.
Pretty sure the ChilLed has a higher ppf in the 660w zone.
If you want to lace a room I'd recommend Amare Bar-8, Bar-6 LUV or the Bar-8 UVA coming out soon.
The Bar-6 LUV is only 950 delivered rn on pre-orders.
Top-bin Samsung 301H , Osram SSL's with the SQ option.
X2 MeanWells & does tricks!
380-740nm Horticultural Fixtures.
They both have the same spent spectrum.
Highly doubt the Lotrilux is a L/90 rating. Not at a 2.4 umol/j. Not period.
Pretty sure the ChilLed has a higher ppf in the 660w zone.
If you want to lace a room I'd recommend Amare Bar-8, Bar-6 LUV or the Bar-8 UVA coming out soon.
The Bar-6 LUV is only 950 delivered rn on pre-orders.
Top-bin Samsung 301H , Osram SSL's with the SQ option.
X2 MeanWells & does tricks!
380-740nm Horticultural Fixtures.
Last edited:
I mean technically you’re correct but in another sense I can take a picture of the board and you can give me something to write down with me in the picture in the board to prove that the boards are real as of May or actually ordered a bunch of them and as you see I’ve got the LEDs and I’ve just placed them on there the show Two people that can actually have the brains to imagine why one would follow you look like complete I’m just waiting for a reflow oven should be in the next couple days and I’ll have one well actually several to show the completed grow light and I’m gonna send a couple members on here the board for free so when I start my throat about my life they can comment and so what they think about it whether they call it shit for quality or very well-built together And top-notch quality especially for the price I was selling them for it’ll be cheaper as far as in what you get when you order my grow light with all the spectrum options that you can make compared to others with just red LEDs on there that you can’t change.
Been thinking about going to one of those websites where people pre-order and get charged last so that person has the revenue to get the production started I have enough to make 12 Hlg 480. The 1 with four boards on it with a giant eat sink if someone would be willing to pre-order them I will be selling it for $650 complete kit with spectrum control