TheFrozenChosen
Active Member
as a follow up....I pulled 2.75 LBS out of my box with a circular scrog and 2 600wt HPS.... BOOYAH!!!! 1.02 g per watt
My smallest blueberry plant just yielded 4 dry ounces and that's without scrogging it or anything and just with one light and a really shitty grow room setup.you are correct, kinda. an lst or scrog plant at 5 ft is gonna yield alot more than 2 oz, i wasnt thinking of just letting it go on its own. he has a breeder strain and hps but he cant lst or scrog though? its so simple a noob can read a article and do it properly. but yes, w/o scrog or lst or topping 5 ft plants have no business inside imo. short bushy indoors all the way. lol
take what you are doing and add a vertical screen in a C formation around the light....you will experience amazing results....My smallest blueberry plant just yielded 4 dry ounces and that's without scrogging it or anything and just with one light and a really shitty grow room setup.
It was a sickly little plant compared to my big ladies which are still 3 weeks or so away from being done. 5' plants have no business inside if you are lighting it from the top, but if you are lighting from the side you get a pretty decent yield easily enough like this pic attached. The 4 oz plant wasn't even 1/4 the size of the big ones. I'm not saying this is the way to go over SOG or anything, this is just the way I have to grow because of legal plant count limits in my state.
take what you are doing and add a vertical screen in a C formation around the light....you will experience amazing results....
8 plants, 3.5'x4'x6' box, 1200 watts, 2.75 lbs.....it works well for a small scale op
good luck!
I didn't say I didn't believe you I said it didn't work for me. Well it did for a while and then when it loaded up it started to burn if the thing was pushed off center at all. I'd like to know what the difference was that made it work for him.I won't hold it against you if you don't believe me, but I wouldn't blow smoke up anybodys ass for any reason.
My friend in socal is getting 10 LBs with 4 1000w lights doing SOG with little veg time and lollipopping the 2nd week of flower using GH nutes, the strain is og kush(not the imitation the real deal) he's been growing it for at least 7 or 8 years now. he does 2 4x8 flood tables with 64 plants per table using only 6x6" rockwool and watering by hand(drain to waste). Same guy got 15 LBS with 6 lights same strain same style of grow. The main key is your ventilation and a top notch A.C. so you can get your bulbs as close as possible to your canopy, well there's a lot of factors but he said that was his best improvement that showed results.
double average. well done man.I am on my third round 4 1ooow hps 50 plants and i always get 8 lbs dried is that average?
I am on my third round 4 1ooow hps 50 plants and i always get 8 lbs dried is that average?
not unbelievable. i run a 4'x8' table 2 600's strain is endless sky, with 50 plants per table. 1 week veg and then i run advanced nutrients 3 part formula with a ebb flow set up....average yield now its dialed in is 3 pounds. i usually get an ounce or two more but three is the rounded figure.I won't hold it against you if you don't believe me, but I wouldn't blow smoke up anybodys ass for any reason.
My friend in socal is getting 10 LBs with 4 1000w lights doing SOG with little veg time and lollipopping the 2nd week of flower using GH nutes, the strain is og kush(not the imitation the real deal) he's been growing it for at least 7 or 8 years now. he does 2 4x8 flood tables with 64 plants per table using only 6x6" rockwool and watering by hand(drain to waste). Same guy got 15 LBS with 6 lights same strain same style of grow. The main key is your ventilation and a top notch A.C. so you can get your bulbs as close as possible to your canopy, well there's a lot of factors but he said that was his best improvement that showed results.
People claim that a lot, that you can get a 600 closer and use good fresh bulbs thus equal a 1kw... Good bulbs are expensive and I guess it depends on electric costs where you are but if electric isn't crazy high I'd really have to argue against your strategy. You could be getting close to what a 1kw will do using 6 month old $10 generic bulbs so add up the costs differences between $10 1kw generic bulbs lasting for 6 months vs the energy saving and expensive bulbs lasting much shorter in the 600 I bet it's costing you more money for less light the route you are taking.not unbelievable. i run a 4'x8' table 2 600's strain is endless sky, with 50 plants per table. 1 week veg and then i run advanced nutrients 3 part formula with a ebb flow set up....average yield now its dialed in is 3 pounds. i usually get an ounce or two more but three is the rounded figure.
its all about nutes and lights. 1 get almost the same lumens per square foot with my adjust a wing with heat spreader as most can get with a 1000 they got to keep further away. i also use high lumen ushio bulbs (not every 600 watt light is as good as another) which i change frequently. and then lets not forget if you want higher yields using sugar (can augment bud weight by a 25% increase), co2, fresh air exchange, and just every day loving on your plants.
as for nutes it's mostly being on top of your shit. i'd rather spend more money for fresh nutes in my tank than reuse a depleted tank
my 2 cents
If you are using a 1000wt I recommend 4" mesh....you can find it lowes/depot....mine was 2" mesh that I suspended from the ceiling of my box.....unfort. my plants are in a rectangle pattern so I make the mesh conform to a oblong shape....when the two in the open area get tall I slide another in over them effectively making a 360 around the light. for being 8" from the light I had minimal burn. if you made 4 panels, each 4' X 6', with 2 plants per, and your light dead center....they'll go nuts.....better to have 1 low and 1 high though, wich is why I use 600s1200w and 2.75 damn... Nice...
I already tried a full circle of vertical chicken wire around the bulb to hold the plants away at a decent distance and keep them from flopping over onto the bulb but any time I moved the plants or if they settled after I turned the light on then they would end up crooked from the bulb and not centered any more and burned.
All the weight of each plant has to be distributed evenly on ea side of the wire cage to get it to hang centered but things settle the moment you walk away sometimes or just as weight packs on.
Maybe I used too small a diameter though, didn't give myself enough extra wiggle room and might try it again. What diamter circle did you use and how did you keep the bulb centered or the ring from moving?
That sounds about like exactly what I did except for with chicken wire. I think I will try again, I do need some of that larger stuff anyway. I'll do the same thing again with a tube around the light but this time I'll make it much much longer and just anchor the tube floor and ceiling so it can't move and see what we get. I know it should work I think I just had some problems that I'll need to change like better fan on the floor and more air space left at the ceiling next time among other things.If you are using a 1000wt I recommend 4" mesh....you can find it lowes/depot....mine was 2" mesh that I suspended from the ceiling of my box.....unfort. my plants are in a rectangle pattern so I make the mesh conform to a oblong shape....when the two in the open area get tall I slide another in over them effectively making a 360 around the light. for being 8" from the light I had minimal burn. if you made 4 panels, each 4' X 6', with 2 plants per, and your light dead center....they'll go nuts.....better to have 1 low and 1 high though, wich is why I use 600s
g'luck