turbocivic6776
Active Member
I have my own way i do it just from testing and making changes and im sure there is things that i dont do that could make it better or different. anyway im open to try any ideas but here is the way i do it and i get really tasty and smelly bho from it that def. gets me blazed.
![2012-01-15_11-31-40_783.jpg](/data/attachments/1405/1405106-2ecd2d617e31580a408e0ac89dc5d889.jpg)
![BHO Bubble.jpg](/data/attachments/1405/1405107-ddac2c1f80175b3321c222193b8ccf11.jpg)
![BHO.jpg](/data/attachments/1405/1405108-c56c9f8d316ca958940561f5b61e9862.jpg)
![Extraction Tube.jpg](/data/attachments/1405/1405127-6f31dd47b89c4ca7a07e2b1c77358a2f.jpg)
![MJ and Extraction tube.jpg](/data/attachments/1405/1405128-53fd58ffaa00eff6260a1775f0e74147.jpg)
![Pot.jpg](/data/attachments/1405/1405129-e7b8cb96f8871a4fdae3a0b3bc81acdc.jpg)
![Vector grinder filter.jpg](/data/attachments/1405/1405131-a027a69b126b0be7e994d34c8a6013e8.jpg)
![9 inch pan and Alc.jpg](/data/attachments/1405/1405132-e32f8a8e08b5eb8c684cf17b34bc5a8f.jpg)
![Extraction tube comparison.jpg](/data/attachments/1405/1405165-fcd02b53f96b7444e635a4ea101da05c.jpg)
![oil.jpg](/data/attachments/1405/1405458-3959b2106c8d09570601b4bb7a31aa97.jpg)
![Oil on razor.jpg](/data/attachments/1405/1405459-9130dedefd4ef8481f0dae9c014b3947.jpg)
![workability.jpg](/data/attachments/1405/1405460-fa75f8bfb9b665289b92b07c084d7f29.jpg)
![Scraped.jpg](/data/attachments/1405/1405461-310b482b22e40340f55f23fb01b31dc3.jpg)
![scraped1.jpg](/data/attachments/1405/1405462-000b3f1395f3649b65aec9c5c15853f4.jpg)
![Bong1.jpg](/data/attachments/1405/1405527-f539e28ea327e5ca2eb8b07a005f7c5e.jpg)
![bong2.jpg](/data/attachments/1405/1405528-7dcd00dc371f892370792ecc66ac842c.jpg)
![syn.jpg](/data/attachments/1405/1405529-ad68de6ef0f66363f91468073528f2aa.jpg)
List of materials:
Extraction tube (I have two one will hold a gram and the other will hold an 1/8 both made of brass and very easily made just on the expensive side)
Zip tie
#4 premium coffee filter (premo filter is just thicker)
Bud
Butane (I use Vector)
Grinder
9" aluminum round baking pan to extract into (make sure it has a smooth flat bottom to scrape)
At least two razor blades (I use the ones that go into utility knives so there isnt any ridges and you can scrape it completely clean)
Large pot that is slightly bigger then the bottom of the baking pan (this will be used on stove to heat water under the baking pan)
Stove top either Electric or Natural Gas (I try and keep temp low enough where it is hot but wont burn me setting 3-4 on my burner)
91% Isopropyl Alcohol (for cleaning)
I made a extraction tube from brass pieces found at home depot and just put a piece of coffee filter on the one end held on with a zip tie/ wire tie.
I take some flower and grind it up in my grinder then fill the tube with the ground up bud. i pack it gently not tight and not loose. I then close the other end with the brass cap that i drilled a hole in just the size of the plastic adapters that come in the vector cans. I then use electrical tape on the joints where the caps screw on to the brass nipple just to keep the pressure from escaping out the joints. Now will take the Butane, 9" pan, and my filled extraction tube outside and just hold it over the pan while trying to keep a steady flow of butane through the tube. I usually just keep running it through till i dont see anymore oil coming out id say about 30 seconds max. (time is for my 1g tube it will be longer for a bigger tube). Once i am done extracting i will take my pan inside and throw some water in my pot on the stove on low heat and then throw my pan with the oil in the water and just let it sit for a few minutes. During this time i usually clean my razor blades with some 91% iso. I will then take my blade and keep popping the bubble and scraping back and fourth with just the point of the blade trying not to get much on the blade just enough to get the bubbles of butane out. You will see after about 10 mins there will not be any bubbles forming anymore. once i am satisfied that all of the butane is boiled out i will pull the pan out usually its hot enough to sting my hand a little but not burn i like keeping the heat low enough to where it doesnt burn me when i handle the pan with bare hands. then i will wipe off the water from the bottom and throw it in my freezer for about 3 mins it gets cold really fast im guessing because i do so little oil and it is an aluminum pan. I then get my pan out of the freezer and let sit at room temp for about 10 mins or else it will crack up like glass. Then i scrape it up with my blade as best as i can. Thats it all together it takes about 35 mins for me to make some BHO from bud to oil and smoking.
When i do my next run i will take pics of everything and each step
![2012-01-15_11-31-40_783.jpg](/data/attachments/1405/1405106-2ecd2d617e31580a408e0ac89dc5d889.jpg)
![BHO Bubble.jpg](/data/attachments/1405/1405107-ddac2c1f80175b3321c222193b8ccf11.jpg)
![BHO.jpg](/data/attachments/1405/1405108-c56c9f8d316ca958940561f5b61e9862.jpg)
![Extraction Tube.jpg](/data/attachments/1405/1405127-6f31dd47b89c4ca7a07e2b1c77358a2f.jpg)
![MJ and Extraction tube.jpg](/data/attachments/1405/1405128-53fd58ffaa00eff6260a1775f0e74147.jpg)
![Pot.jpg](/data/attachments/1405/1405129-e7b8cb96f8871a4fdae3a0b3bc81acdc.jpg)
![Vector grinder filter.jpg](/data/attachments/1405/1405131-a027a69b126b0be7e994d34c8a6013e8.jpg)
![9 inch pan and Alc.jpg](/data/attachments/1405/1405132-e32f8a8e08b5eb8c684cf17b34bc5a8f.jpg)
![Extraction tube comparison.jpg](/data/attachments/1405/1405165-fcd02b53f96b7444e635a4ea101da05c.jpg)
![oil.jpg](/data/attachments/1405/1405458-3959b2106c8d09570601b4bb7a31aa97.jpg)
![Oil on razor.jpg](/data/attachments/1405/1405459-9130dedefd4ef8481f0dae9c014b3947.jpg)
![workability.jpg](/data/attachments/1405/1405460-fa75f8bfb9b665289b92b07c084d7f29.jpg)
![Scraped.jpg](/data/attachments/1405/1405461-310b482b22e40340f55f23fb01b31dc3.jpg)
![scraped1.jpg](/data/attachments/1405/1405462-000b3f1395f3649b65aec9c5c15853f4.jpg)
![Bong1.jpg](/data/attachments/1405/1405527-f539e28ea327e5ca2eb8b07a005f7c5e.jpg)
![bong2.jpg](/data/attachments/1405/1405528-7dcd00dc371f892370792ecc66ac842c.jpg)
![syn.jpg](/data/attachments/1405/1405529-ad68de6ef0f66363f91468073528f2aa.jpg)
List of materials:
Extraction tube (I have two one will hold a gram and the other will hold an 1/8 both made of brass and very easily made just on the expensive side)
Zip tie
#4 premium coffee filter (premo filter is just thicker)
Bud
Butane (I use Vector)
Grinder
9" aluminum round baking pan to extract into (make sure it has a smooth flat bottom to scrape)
At least two razor blades (I use the ones that go into utility knives so there isnt any ridges and you can scrape it completely clean)
Large pot that is slightly bigger then the bottom of the baking pan (this will be used on stove to heat water under the baking pan)
Stove top either Electric or Natural Gas (I try and keep temp low enough where it is hot but wont burn me setting 3-4 on my burner)
91% Isopropyl Alcohol (for cleaning)
I made a extraction tube from brass pieces found at home depot and just put a piece of coffee filter on the one end held on with a zip tie/ wire tie.
I take some flower and grind it up in my grinder then fill the tube with the ground up bud. i pack it gently not tight and not loose. I then close the other end with the brass cap that i drilled a hole in just the size of the plastic adapters that come in the vector cans. I then use electrical tape on the joints where the caps screw on to the brass nipple just to keep the pressure from escaping out the joints. Now will take the Butane, 9" pan, and my filled extraction tube outside and just hold it over the pan while trying to keep a steady flow of butane through the tube. I usually just keep running it through till i dont see anymore oil coming out id say about 30 seconds max. (time is for my 1g tube it will be longer for a bigger tube). Once i am done extracting i will take my pan inside and throw some water in my pot on the stove on low heat and then throw my pan with the oil in the water and just let it sit for a few minutes. During this time i usually clean my razor blades with some 91% iso. I will then take my blade and keep popping the bubble and scraping back and fourth with just the point of the blade trying not to get much on the blade just enough to get the bubbles of butane out. You will see after about 10 mins there will not be any bubbles forming anymore. once i am satisfied that all of the butane is boiled out i will pull the pan out usually its hot enough to sting my hand a little but not burn i like keeping the heat low enough to where it doesnt burn me when i handle the pan with bare hands. then i will wipe off the water from the bottom and throw it in my freezer for about 3 mins it gets cold really fast im guessing because i do so little oil and it is an aluminum pan. I then get my pan out of the freezer and let sit at room temp for about 10 mins or else it will crack up like glass. Then i scrape it up with my blade as best as i can. Thats it all together it takes about 35 mins for me to make some BHO from bud to oil and smoking.
When i do my next run i will take pics of everything and each step