How much should I be pulling per watt

I'm running three radiant 8 1000w in a 9x7 room air-cooled temps staying at 80 running co2 1100ppm throughout. Coco in ten gallon pots. Vegged for 8 weeks. 8 plants total what should I be pulling from this setup?
also depends on the grower
 
Looks like you just need to read read read

your canopy is all over the place just a bunch of noob mistakes

no hate intended you should be able to get at leats 1gpw with your set up

but you need to fix a bunch of little things
 
I'm running three radiant 8 1000w in a 9x7 room air-cooled temps staying at 80 running co2 1100ppm throughout. Coco in ten gallon pots. Vegged for 8 weeks. 8 plants total what should I be pulling from this setup?
some pics would be nice or this a thought up grow room ?
 
I did scrog once 6 plants outcome was the same as I get with 8 plants now maybe I did it wrong I took out portable at and added a wall ac only difference
 

Attachments

  • 20140505_113705.jpg
    20140505_113705.jpg
    2.8 MB · Views: 50
  • 20140602_193303.jpg
    20140602_193303.jpg
    2.6 MB · Views: 51
  • 20140509_070001.jpg
    20140509_070001.jpg
    2.4 MB · Views: 49
For one light I average 1.5 to over 2lbs a light in tight space depending on what im running at the time
with no co2
you should be blowing me away
 
This grow I've been doing tomato cages mayb I should switch from straight coco? To coco perlite mix
 
K I remember who you are now lol
yea the perlite will help more air to your babies

I remember you said theyd droop after watering right?
 
No not these That's a different setup. Those straightened out just had to let them dry out I guess
 
If your room is perfect and your trying to max yield you don't need to change anything..perlite is fine if you want to add but it's not going to be some miracle. Add 30-50 percent if you want , you will get more run off . You Just need more tops... If your going to do fewer plants top them a lot so it almost looks like a scrog.. Lots of tops close to the light. I've got 11.5ps off 4k watts so it is possible to pull 1gpw easily when you get your method down. what size canopy are you working with? Push at least 5x5 space per thousand watt. I'm doing 7 gallon containers now topped 3-5 times. Average 6-8ounces per and I shove 5 or 6 under each light
 
If your room is perfect and your trying to max yield you don't need to change anything..perlite is fine if you want to add but it's not going to be some miracle. Add 30-50 percent if you want , you will get more run off . You Just need more tops... If your going to do fewer plants top them a lot so it almost looks like a scrog.. Lots of tops close to the light. I've got 11.5ps off 4k watts so it is possible to pull 1gpw easily when you get your method down. what size canopy are you working with? Push at least 5x5 space per thousand watt. I'm doing 7 gallon containers now topped 3-5 times. Average 6-8ounces per and I shove 5 or 6 under each light
Whats your Veg time for that setup? From seed or clone?
 
If your room is perfect and your trying to max yield you don't need to change anything..perlite is fine if you want to add but it's not going to be some miracle. Add 30-50 percent if you want , you will get more run off . You Just need more tops... If your going to do fewer plants top them a lot so it almost looks like a scrog.. Lots of tops close to the light. I've got 11.5ps off 4k watts so it is possible to pull 1gpw easily when you get your method down. what size canopy are you working with? Push at least 5x5 space per thousand watt. I'm doing 7 gallon containers now topped 3-5 times. Average 6-8ounces per and I shove 5 or 6 under each light
If this op is the same I guy talked to his plants droop after being watered

which tells you what?
come on guys its just
simple stuff

everyone always tries to find the most difficult answer
when most of the time its the simple one that do it

besides no offense but you can"tell" some things need to be fixed in his room :)
 
I'm getting 8-10 and 11 off a cotton candy phenobut only run 8 plants the most and diff strains I'm gonna start with two strains only and I'm gonna try doing it in tomato cages. I think if I run ten plants in ten gal I'll get a bigger yeild
 

Attachments

  • 20140825_184135.jpg
    20140825_184135.jpg
    2.4 MB · Views: 20
  • IMG_20140917_132101:nopm:.jpg
    IMG_20140917_132101:nopm:.jpg
    2.2 MB · Views: 22
I like the tomato cages so far because was having trouble with the girls not supporting the weight on some branches even with bamboo
 
Whats your Veg time for that setup? From seed or clone?
6 weeks . I think the thread is still on the site I posted it.

If this op is the same I guy talked to his plants droop after being watered

which tells you what?
come on guys its just
simple stuff

everyone always tries to find the most difficult answer
when most of the time its the simple one that do it

besides no offense but you can"tell" some things need to be fixed in his room :)
Drooping can be from a lot of things not just overwatering. Could of been a nutrient lock out from salt build up, we don't know what he's using . It is pretty damn difficult to overwater coco, it'll just piss out the bottom. But sure perlite is the cure. Op is not doing enough plants per light . 7 or ten gallon pots you should be doing 4 per light minimum. His plants and huge I highly doubt he's overwatering his plants. I don't recall reading anything about how often he's feeding? What else is wrong in his room? Were trying to help the guy not bash him, share with us your wealth of information
 
Persoanlly I like the scrog set up you had or have but

you just beed to do "it" a lil better

Pm me if you want help or ideas
 
Back
Top