How many plants can i put in a 7x7 space?

You should be asking how much of a footprint you can cover with that light, then fill that footprint with plants.

General rule of thumb with 1000w is 5x5ft. And then fill it with plants. That could be one monster plant or 100small ones, up to you...
 
That is so much better than my answer, which is....all of them! :)

Yeah, that's what I use. I cycle 4 plants under 1000w on a 3 x4 table, adding a pair a month, and harvesting a pair.
 
im growing incredible bulk from dr. krippling-was hoping for at least 4 nice size plants,i have a 8 foot ceiling was going to veg 2 foot, bloom two foot, if the plan works out
 
gypsyprepper said:
I have a 1000 watt light , co2 generator, I want to use dwc buckets,but am unsure how many plants i can squeeze in?
Click to expand...

Don't do dwc, if you only have a 7 x 7 space. There are other, better ways. DWC and squeezing do not mix. Seriously. The space is so small the plumbing will drive you crazy.

But, hey, no one could tell me different when I started. :)
 
gypsyprepper said:
thats cool i didnt know that ive always grown in soil and am more comfortable with it,tks for info
Click to expand...

Well, there is a hybrid approach that I came to have, by being the Rube Goldberg of DWC in a hall bathroom. But, I had a bathtub, so I could have an RO water barrel plumbed into the shower head, etc. But, it was only 9 x 5 on the floor with the cabinet taken out. Toilet took the RO waste side drain.

I had 2 x 10 gal totes, small so I could pull them out for cleaning
- pumps in each, 550 gph is good, on timers, to feed emitters on each bucket
- table, 3 x 4ft above those, leave good room for the totes
- dutch trays with drains connected to the totes
- 4 plants in 2.5 gal rose buckets

So, it is all a matter of what will you do. If you have 5 ft wide 6ft tall, pruned out, pair of Veg monsters, you might want to put 2000 w over them.

I had 4 x 4ft tall at most. 1000 w works fine.
 
gypsyprepper said:
i just ran into anther question, do i need to put reflective film on the floor?
Click to expand...

Not if you have any sense. And about reflective film. You want refractive. In fact, if you take silver mylar and crush it up in your hands tightly, unfold it, and drape it loosely, it will be much better.

A white wall, will refract, 10 times more light spread than a mirror will reflect. So, even if hanging white panda, loose works best for splashing light around the room.

So, you ruin it if you try to walk on it. I know.

Best is to get a good hard garage floor paint. White of course.

For wall and ceiling I go with mylar bubble wrap. It is very refractive. And it reflects IR, so you don't heat load all that drywall. And it is a good insulator, so the AIR conducted heat cannot load the drywall either.
 
You must log in or register to reply here.

Similar threads

B
One-pound Plant in Sealed CO2-Enriched Grow Room
Replies
6
Views
797
Nizza
Nizza
Fladawg01
PPFD and DLI Questions
Replies
16
Views
1K
Delps8
D
Bushbaby11
Advice from people with experience...
Replies
0
Views
166
Bushbaby11
Bushbaby11
J
LST from here ain't easy
Replies
6
Views
601
Mumbeltypeg
Mumbeltypeg
beegreenie740
I have a few questions so that's why I didn't put this question in the auto flower part.
Replies
14
Views
648
go go kid
go go kid
Back
Top