poopstainedpants
Member
So I've seen it done a few times on this site so i figured id build my own dwc with rubbermade roughnecks. It was easier than I thought it would be.
Supplies (per unit):
(1) Rubbermade 14 gallon roughneck
(1) Elite 801 air pump
(1) Sunleaves 6" air stone
(5) 5" net pots
and a little over a foot of rubber tubing.
I began by tracing the net pots on the lid of the rubbermade tote. Once traced I heated up two knives (id switch off as one cooled there would be a hot one waiting) on the stove and used them to cut along the lines i traced (making sure to leaves a little room so that the pots didnt just fall through, that would have sucked). Then I heated up a phillips head screwdriver and punched a hole near the bottom of the tote so i could feed the tubing through and attach the air pump to the air stone. I filled it up and there were no leaks but I sealed with caulk anyway.
I tried cutting the first hole for the net pots with my jigsaw but it was actually a pain in the ass, the hot knives cut through the plastic like butter.
Supplies (per unit):
(1) Rubbermade 14 gallon roughneck
(1) Elite 801 air pump
(1) Sunleaves 6" air stone
(5) 5" net pots
and a little over a foot of rubber tubing.
I began by tracing the net pots on the lid of the rubbermade tote. Once traced I heated up two knives (id switch off as one cooled there would be a hot one waiting) on the stove and used them to cut along the lines i traced (making sure to leaves a little room so that the pots didnt just fall through, that would have sucked). Then I heated up a phillips head screwdriver and punched a hole near the bottom of the tote so i could feed the tubing through and attach the air pump to the air stone. I filled it up and there were no leaks but I sealed with caulk anyway.
I tried cutting the first hole for the net pots with my jigsaw but it was actually a pain in the ass, the hot knives cut through the plastic like butter.
Attachments
-
33.1 KB Views: 59
-
24.8 KB Views: 57
-
23.9 KB Views: 46
-
31.6 KB Views: 41