HELP.... newbie....

its better to hang the fan so its 12" below the hood on one side of the room so it can remove most the heat from the 600w
the close you get the hood to the top of the canopy the more bud your going to grow :)
but at the same time the environment has to be good ( temps and humidity )

my temps are between 29-34c and the humidity is between 31-40, the hoods 14" above the canopy and i am 24 days in flower 12/12

here's a one of the plants in the wardrobe

View attachment 3645609
looks great mate.... my temps on 400w hps are averaging 23/24c...and humidity around 40%.... expecting heat to go up when i switch the 600w on... have a few good fans so can use them...
 
yer i would pot them up in 5 gallon pots and give them a week more in veg for the roots to settle
I can see this making a big difference :)
 
yer i would pot them up in 5 gallon pots and give them a week more in veg for the roots to settle
I can see this making a big difference :)
hi dude.... been mad busy working lately.... potted the girls up to 5 gallon pots and switched to flower....but made a MASSIVE mistake...i got a fan heater for tent but had it way to close and it burned 2 of the plants badly....they are slowly recovering now thank god... will post some pics when i get the chance....
 
hi dude.... been mad busy working lately.... potted the girls up to 5 gallon pots and switched to flower....but made a MASSIVE mistake...i got a fan heater for tent but had it way to close and it burned 2 of the plants badly....they are slowly recovering now thank god... will post some pics when i get the chance....

its ok mate, weed is very hard to kill, i would trim back all the dead leaves and shoots and the plant should recover in a week and still give you a good yield

some pic's would be great so i can see how much damage you have done
 
its ok mate, weed is very hard to kill, i would trim back all the dead leaves and shoots and the plant should recover in a week and still give you a good yield

some pic's would be great so i can see how much damage you have done
i trimmed everything off.... watering later dude will post some then.... they do look lot better....
 
its ok mate, weed is very hard to kill, i would trim back all the dead leaves and shoots and the plant should recover in a week and still give you a good yield

some pic's would be great so i can see how much damage you have done
pics dude....
 

Attachments

  • 20160417_205109.jpg
    20160417_205109.jpg
    1.9 MB · Views: 10
  • 20160417_205124.jpg
    20160417_205124.jpg
    1.8 MB · Views: 10
  • 20160417_205135.jpg
    20160417_205135.jpg
    1.9 MB · Views: 8
  • 20160417_205143.jpg
    20160417_205143.jpg
    1.6 MB · Views: 10
  • 20160417_205149.jpg
    20160417_205149.jpg
    2.2 MB · Views: 6
  • 20160417_205155.jpg
    20160417_205155.jpg
    2.2 MB · Views: 8
your plants look great, there no problem with these plants :)

couple of burnt leaves but not a big problem, if you have any Epson salts, I would give them 2 tbsp mixed in with 15ltrs of water ( one off)

plants in soil always do well if you add some manganese in early flower
 
your plants look great, there no problem with these plants :)

couple of burnt leaves but not a big problem, if you have any Epson salts, I would give them 2 tbsp mixed in with 15ltrs of water ( one off)

plants in soil always do well if you add some manganese in early flower
i have some and added it to my last feeding mate... so u would just add it once..? they are in week 2 of flower..(9-04-16 wk one of flower)
 
i have some and added it to my last feeding mate... so u would just add it once..? they are in week 2 of flower..(9-04-16 wk one of flower)

yer if you gave the 3 plants a good amount of Epson salts, it should keep them happy, could give them some more in a few weeks but the plant uses magnesium and sulfate as a second/trace nutes so the plant only uses a small amount, so you don't want to over do it
 
yer if you gave the 3 plants a good amount of Epson salts, it should keep them happy, could give them some more in a few weeks but the plant uses magnesium and sulfate as a second/trace nutes so the plant only uses a small amount, so you don't want to over do it
YOU have been a great help mate... plty we couldnt share some smoke when they are ready.... been down to u that has got me ere... cheers....
 
YOU have been a great help mate... plty we couldnt share some smoke when they are ready.... been down to u that has got me ere... cheers....

your welcome mate, i would i see some pics of your harvest when there finished :)

This site is all about helping people to grow good quality bud, when you get the chance, help somebody to grow there first crop as i helped you :)
 
your welcome mate, i would i see some pics of your harvest when there finished :)

This site is all about helping people to grow good quality bud, when you get the chance, help somebody to grow there first crop as i helped you :)
wisdom passes on MATE.... thank u....
 
your welcome mate, i would i see some pics of your harvest when there finished :)

This site is all about helping people to grow good quality bud, when you get the chance, help somebody to grow there first crop as i helped you :)
more pics mate....
 

Attachments

  • 20160420_233545.jpg
    20160420_233545.jpg
    2 MB · Views: 8
  • 20160420_233550.jpg
    20160420_233550.jpg
    1.9 MB · Views: 5
  • 20160420_233557.jpg
    20160420_233557.jpg
    1.9 MB · Views: 8
  • 20160420_233605.jpg
    20160420_233605.jpg
    2.2 MB · Views: 8
  • 20160420_233627.jpg
    20160420_233627.jpg
    2.1 MB · Views: 5
  • 20160420_233627.jpg
    20160420_233627.jpg
    2.1 MB · Views: 4
  • 20160420_233642.jpg
    20160420_233642.jpg
    2.1 MB · Views: 4
  • 20160420_233649.jpg
    20160420_233649.jpg
    2.3 MB · Views: 7
your welcome mate, i would i see some pics of your harvest when there finished :)

This site is all about helping people to grow good quality bud, when you get the chance, help somebody to grow there first crop as i helped you :)
hi dude.... posted more pics....
 

Attachments

  • 20160427_193910.jpg
    20160427_193910.jpg
    1.6 MB · Views: 7
  • 20160427_193923.jpg
    20160427_193923.jpg
    2 MB · Views: 5
  • 20160427_193934.jpg
    20160427_193934.jpg
    1.6 MB · Views: 5
  • 20160427_193941.jpg
    20160427_193941.jpg
    1.9 MB · Views: 6
  • 20160427_193947.jpg
    20160427_193947.jpg
    1.5 MB · Views: 6
  • 20160427_193958.jpg
    20160427_193958.jpg
    1.9 MB · Views: 7
  • 20160427_194015.jpg
    20160427_194015.jpg
    2.5 MB · Views: 7
  • 20160427_194020.jpg
    20160427_194020.jpg
    2.1 MB · Views: 6
  • 20160427_194026.jpg
    20160427_194026.jpg
    2 MB · Views: 5
  • 20160427_200339.jpg
    20160427_200339.jpg
    2.4 MB · Views: 7
Back
Top