It's a 150w hps but plan on using 250, have a carbon filter it's just not connected yet4 inch fan is too small. Is that a 600 what or a 100w light?
The intake fan is placed behind the tent on a table pushing air into the growWhere is the fan placement on the intake at?
Where would you put the exhaust ducting ? Why above ?His exhaust is pulling air from under the hood. I don't know why it isn't above or attached to the hood...
bc heat risesWhere would you put the exhaust ducting ? Why above ?
I'm in taking fresh air from the window at the back of the room from the left side of the window and exhausting air out the right side, so it's more use putting the exhaust ducting above the reflector than at the bulb?So you have no fresh air then ? And the exhaust is pushing hot air into the small space, correct?
You need that intake fan at the end of the tube right at the windowI'm in taking fresh air from the window at the back of the room from the left side of the window and exhausting air out the right side, so it's more use putting the exhaust ducting above the reflector than at the bulb?
I have a speed controller so have turn it down so I should swap fans ? And put the fan at the end of what tube ? So have the fan at the window sucking air out ?Id use the smaller fan to exhaust and the bigger one to intake...prolly blow your tent up like a balloon bc thats overkill fan.
You need that intake fan at the end of the tube right at the window
How ? 150w hpsYou are gonna get caught very quickly with that set up.
You still haven't told me the wattage of your lamp.