Going Vertical - 4x4 Tent

kiwipaulie

kiwipaulie

Well-Known Member
Bubblegum31 said:
Ja man after More than 9 years smoking just arabian grade 1 hash with no tobbac my cheest is not that wide open any more loolbongsmilie:hump:
Now bien on mj for almost 6 years my lounges dosent feel like sahara any more as well loool:weed:

Plus am a heavy smoker, so forgive me my passion is in an smoking and NOTHING EALSE! :)

Airborne guy :eyesmoke: lool:peace:

Ill make you without no worries ;)
Click to expand...
Shit I've been smoking nearly 22+ years
 
Bubblegum31

Bubblegum31

Well-Known Member
kiwipaulie said:
Yeah bro. Basically they will nearly charge the same in shipping costs. Our customs and excise make us pay duty on the total cost including shipping costs and insurance. Its bullshit. I used to have loads of problems when I was buy performance parts for a car I used to own.
Click to expand...

EU is exactly the same bro,, you can just get gavita or philips cmh and minmum is 350/450/550 euro per structure I believe

Prices are crazy!!!

De will be a better choice when I find deals for Gavita and lumatek complete structures for 420 euro and 450 EUR while the Normal in here is 550 for gavita and lumatek 1000w DE complete structures.
 
Last edited:
Bubblegum31

Bubblegum31

Well-Known Member
ttystikk said:
And in sealed hoods those rules of thumb make sense. This isn't that; the objective is to simply assist the hot air's natural desire to rise and exit near the top. I never put my lamps in cool tubes, I lose too much light.

A box fan on its back, raised off the floor so it gets flow through it of course, is all that's needed, even for three lamps running at 1000W each!
Click to expand...

Must use cooltubes in here or go sealed, cant dare. Heat signature!!
 
Bubblegum31

Bubblegum31

Well-Known Member
ttystikk said:
In order to get high speed they went with a brushless motor design. That's fine, but they don't tolerate normal speed controllers. You need to get a VARIAC type controller, or maybe they have a high and low speed switch now.
Click to expand...

Variac is cheap and effective but not smart.. Try SMS hybrid controller

Very good ones
 
Bubblegum31

Bubblegum31

Well-Known Member
kiwipaulie said:
I've been thinking of doing something similar. But It would just be the grow room. Not the whole house haha. The only thing that's stopping me is that my veg tent might give off some light leaks or do you think I'm thinking too much into that?
Click to expand...

Yup you think much into that!!
 
Bubblegum31

Bubblegum31

Well-Known Member
kiwipaulie said:
Meanwhile here's a vert lamp I diy together.

Cant seem to buy one anywhere at the moment and the one I could find. I have to play around with it anyway.

I figure I probably don't really need an earth on it, but hooked it up to the hanger anyway.
Click to expand...

Thats seems dangerous bro, becarfull please..
 
Bubblegum31

Bubblegum31

Well-Known Member
kiwipaulie said:
Go with the 8 inch if you plan to use a 1000w. If your looking at doing it in a 4x4, I would recommend stacking two 600's. That's what I'm going to change my 1kw to. Just my thoughts anyhow :)
Click to expand...
Haven 2x600 on 1.2 in cooltubes at the moment and 3x600w above 2.4x1.2 as well.
 
Bubblegum31

Bubblegum31

Well-Known Member
kiwipaulie said:
Hey @ttystikk out of curiosity what nute line do you run.

I'm thinking of doing gh novaflora as its all I can find in the gh range in nz.
Click to expand...
Basics

RO with start point of 200\250ppm.on 500scale of cal\mag and silica

Canna with some tweeks
Plagron good
House and garden very good

Kelp:

Bio weed GH
Urtica GH
Bioworm GH
Algen extract H&G
Eart juice catalyst plant natural
Rhizotonic foilar and sometimes feeding

Roots mainly I use
H&G roots excel ((owsome proudct))

Silica pro tekt
Regulator aptus

Cal\mag advances
Or
Aptus cal mag boost


For flower

Boost foliar first 3 weeks canna
Bloombastic 3 till 6 atami
Top shooter 6 till 9 H&G

Ivormic bio quant , neem oil plagron, diamond shield plagron is what I use for protection if I started to see probleems with beasts or mildew..

Coco wet as my wetting agent


Trying bud candy and bud blood this round..

But had my probleems with my coco this run so I cant really judge them now..

Thats it :)..
 
Vnsmkr

Vnsmkr

Well-Known Member
Your basics are alot more complicated than my basics :). I realize difference btwn soil and hydro; just thought it was a funny comparison
compost, promix, castings, water, fresh coconut water, fresh aloe, unsulphured blackstrap molasses
 
kiwipaulie

kiwipaulie

Well-Known Member
Vnsmkr said:
Its the 1 that bites that fuck out of you which matters though. Shit man, better safe than sorry fkn with power. In my past life I maintained and operated electric/hydraulic tools which operated at 10-12 Amps, 480 volts, type of current which could certainly kill......
Click to expand...
Yeah bro. I hear you, but there is nothing wrong with the way its done. I havnt even rewired it, except for the earth.
 
Bubblegum31

Bubblegum31

Well-Known Member
kiwipaulie said:
All I've done is cut a reflector off. There is no problems with my second lamp.

Having said that, they are cheap!!
Click to expand...

It looks like piece of wood there, I dont know..

Just safe bro u know this shit can get out any second without you even feel it..

Just keep an eye,, keep us updated.

Owsome grow man.. Sure Maybe Ill try vert next round have see nice setups one of them is something like that

image.jpg

Ill see what ill gonna do in the next 6/7 weeks after I finnish my current round.but ill do so in cooltubes I believe... I will decide that later on....
Am 10000% subbed

Owsome grow enjoyed reading it aloot kiwi

Keep it up bro and happy growing

Bubble
 
You must log in or register to reply here.
Top