DiY LEDs - How to Power Them

No, I think that is correct. You have selected results for 6 leds. It is telling you the
total watts dissipated for the 6 leds at 2.0 amps. Watts=voltsxamps
 
So if I'm not completely "filling up" a driver..say it can power up to 4 cxb3070's but I intend on running only 3 instead, am I really hurting efficiency that much and if not, what other consideration is there in doing this?
 
Even on 6 cob's? Or did I misunderstand what LED multiple means?
I missed that part about 6. Then it is totally correct. String of 6 would be that many colts and that many watts.

The more "full" a driver is the more efficient it runs. It's in the data sheet for all drivers...usually called efficiency vs load.
 
I missed that part about 6. Then it is totally correct. String of 6 would be that many colts and that many watts.

The more "full" a driver is the more efficient it runs. It's in the data sheet for all drivers...usually called efficiency vs load.

Yup! Saw that. It seems that once you're around 85% of driver capacity, with the 240 series anyway, the efficiency is minimally affected if at all. That answers a lot of questions for me and effects my build approach.

You've helped me a lot gg. Thank you very much. :-)
 
Is there a formula to determine the watts drawn from the wall? I'm sure this is partially on the driver data sheet and cob spec sheet?
 
Is there a formula to determine the watts drawn from the wall? I'm sure this is partially on the driver data sheet and cob spec sheet?
DC output amps x voltage to gets you the wattage of the load(your cobs power)

Then factor in the correlating driver efficiency.

200w of led dissipation on a 91% efficient driver is 200w x 1.09=218w.

And the same applies to fans and their power supplies. They usually have low 80% efficiencies to wall draw is more significant than just what the fan is using.
 
What effect do the different driver series have on output?

For instance, what's the difference between the 120, 185 and 240? I understand that these numbers represent the wattage of the driver but how does that affect the output?
 
What effect do the different driver series have on output?

For instance, what's the difference between the 120, 185 and 240? I understand that these numbers represent the wattage of the driver but how does that affect the output?

not really kinda sorta ... the 120 is ~150 watts, the 185 is ~200 watts, and the 240 I believe is ~250 watts .
 
not really kinda sorta ... the 120 is ~150 watts, the 185 is ~200 watts, and the 240 I believe is ~250 watts .

Correct. The wattage, I think, probably represents a "mean" throughout the series.

The data sheet references that number as wattage.

After I asked that question, I looked up the cob/driver matching then compared the wattage and number of cobs for each driver series but that have the same amp output. Makes sense now.

Thanks!
 
Has anyone thought of buying the Cree high low bay retrofit kit and using it directly?
One can get a complete CXB fixture with 12-3590's in it,with driver,and white reflector for under 450.00,less with no reflector.All parts Cree.
Given tempatures are 4000k and 80cri and cobs are closer together,but it costs much less than buying components and assembling them.
This has nothing to do with powering but it could be modified for bloom or used for veg it has a very nice 450nm curve as is.
 
Last edited:
Back
Top