CXA3590 Build Plan

Greengenes707

Greengenes707

Well-Known Member
Once again...show something.
Your giving up 20-30% for the same wattage...no matter how cool you keep it. It's not some little amount

Do I care what you do... no
I care you are too immature to see what we are showing you. You don't have to use it or like it...but your denial of facts and truths are very unbecoming.
 
Doer

Doer

Well-Known Member
Greengenes707 said:
Once again...show something.
Your giving up 20-30% for the same wattage...no matter how cool you keep it. It's not some little amount

Do I care what you do... no
I care you are too immature to see what we are showing you. You don't have to use it or like it...but your denial of facts and truths are very unbecoming.
Click to expand...
Oh you are offended. Close your eyes.
 
Pinworm

Pinworm

Well-Known Member
If it wasn't for trolls like that guy, these type of threads (with very interesting and great information) could be a sticky that would help out new growers who are actively looking to actually learn something.
 
Doer

Doer

Well-Known Member
I am trading 20% for 1/2 the COB price and 1/2 the build detail.

It is a tradeoff I have known about from the beginning and I accept that.

You think it is a "sell out." No just a professional design trade off using tried and true professional methods.
 
Doer

Doer

Well-Known Member
Pinworm said:
If it wasn't for trolls like that guy, these type of threads (with very interesting and great information) could be a sticky that would help out new growers who are actively looking to actually learn something.
Click to expand...
Don;t worry, the real stuff goes into my Journal. And despite the vast stupid of these Canadians, I have picked up some good ideas....even from the worse of them.
 
Doer

Doer

Well-Known Member
So go back and see why this is a bloated, troll scat filled thread.
 
Last edited:
Doer

Doer

Well-Known Member
So, I deny Truths, of the RIU Church of Latter Effete Droids.

SO WHAT? I made a trade off, and you think you have not.
You guys didn't figure this out for yourselves. You are all circle jerk followers
of a save money religion.

But, I sell 1 pound to the clinic and I have my money back. Idiots.
 
Last edited:
Doer

Doer

Well-Known Member
High Watts grows Pot.

It has nothing to do with efficiency which is only about the cost of production.

One candle will heat a room. Is that your idea of efficiency? Why suffer for "efficiency?"

A sick joke though real, in Industry where I work, is the "efficiency experts."

They make giant fees to tell us about Trade Offs. These pitiful "effete experts" of RIU don't even
know about their own trade offs.
 
Doer

Doer

Well-Known Member
And there is one more knee jerk comment I would like to address for prosperity and reality.

You cannot purchase 1000w of LED in a lamp for $1000.
 
Doer

Doer

Well-Known Member
Next I'll order the sink, the aluminum sheet and the bilge blower. I'll also get a couple of CXA COBs

This will allow me to:
- wire one driver with 2 COBs
- create drill template
- tap for 2 COBs and mount them at one end in proper spacing for 10
- bend the shroud
- attach it to the sink
- get final cross section
- cut a heat forming mandril from wood to cross section
- heat form the PVC adapter
- attach blower to adapter
- attach blower/adapter to Air Rail(tm)

Now I can do a first test. I'll fire it up, let is stabilize and read the temperature gradient from the end with the COBs to the end with the blower.

A good start and probably 60 days, since I also need to move in, unpack tools, set up work bench, etc.

But he is doing it WRONG!!! boo hoo hoo.
 
Last edited:
Doer

Doer

Well-Known Member
And you are simply hot air. All sound an fury with no significance.

This is planning and I have a plan and you don't like it, droid. Not nothing, a plan. And believe it or not it was your idea and a good one.

This is not the first Church I've busted on RIU, but certainly the easiest to crumble.
 
Doer

Doer

Well-Known Member
You are not practicing Engineering, are not an Engineer, don't have a Physics degree, and are just a talker.

High Watts grow pot, not efficiency.
 
nogod_

nogod_

Well-Known Member
So much furious tinkering to reinvent the wheel.

You just verified that temperature is not the enemy, increasing current is. Yet you insist on running your emitters at 1.4a. How about this, take your own advice? Stop trolling yourself? Forced air is not going to help your rig make sense.

The only thing that makes sense is taking your plans, dumping them in the trash, and buying some new bulbs for your hps.

Doer said:
Next I'll order the sink, the aluminum sheet and the bilge blower. I'll also get a couple of CXA COBs

This will allow me to:
- wire one driver with 2 COBs
- create drill template
- tap for 2 COBs and mount them at one end in proper spacing for 10
- bend the shroud
- attach it to the sink
- get final cross section
- cut a heat forming mandril from wood to cross section
- heat form the PVC adapter
- attach blower to adapter
- attach blower/adapter to Air Rail(tm)

Now I can do a first test. I'll fire it up, let is stabilize and read the temperature gradient from the end with the COBs to the end with the blower.

A good start and probably 60 days, since I also need to move in, unpack tools, set up work bench, etc.

But he is doing it WRONG!!! boo hoo hoo.
Click to expand...
Doer said:
So, I trade off, against the obsolescence of the COBs.

WOOOOOO.....how did he do that? Simple math.

You all are doing it, because Supra pr someone says. Like a church. But, I've read all his stuff. He is not in some LED church. Nor has he concentrated on high watt, forced air rigs that are designed to be useful, if a bit less efficient. Nor is he saying you have to stick with under 10 milliamps so you can be 110%.

And I have not seen a design for $2.75/Pw. So, I think this must be envy.
Click to expand...
 
Doer

Doer

Well-Known Member
nogod_ said:
So much furious tinkering to reinvent the wheel.

You just verified that temperature is not the enemy, increasing current is. Yet you insist on running your emitters at 1.4a. How about this, take your own advice? Stop trolling yourself? Forced air is not going to help your rig make sense.

The only thing that makes sense is taking your plans, dumping them in the trash, and buying some new bulbs for your hps.
Click to expand...
You seem rather apoplectic about all this. Have you wonder why you take this all so personally?
 
Doer

Doer

Well-Known Member
Higher efficiency means higher cost. It is all a trade off and all over your head. You probably live in a rental.
 
You must log in or register to reply here.
Top