Pinworm
Well-Known Member
You don't have a clue what you are talking about, do you?
CXA3590 Build Plan
- Thread starter Doer
- Start date
Greengenes707
Well-Known Member
Once again...show something.
Your giving up 20-30% for the same wattage...no matter how cool you keep it. It's not some little amount
Do I care what you do... no
I care you are too immature to see what we are showing you. You don't have to use it or like it...but your denial of facts and truths are very unbecoming.
Your giving up 20-30% for the same wattage...no matter how cool you keep it. It's not some little amount
Do I care what you do... no
I care you are too immature to see what we are showing you. You don't have to use it or like it...but your denial of facts and truths are very unbecoming.
Positivity
Well-Known Member
Doer
Well-Known Member
Oh you are offended. Close your eyes.
Doer
Well-Known Member
Don;t worry, the real stuff goes into my Journal. And despite the vast stupid of these Canadians, I have picked up some good ideas....even from the worse of them.
Doer
Well-Known Member
So, I deny Truths, of the RIU Church of Latter Effete Droids.
SO WHAT? I made a trade off, and you think you have not.
You guys didn't figure this out for yourselves. You are all circle jerk followers
of a save money religion.
But, I sell 1 pound to the clinic and I have my money back. Idiots.
SO WHAT? I made a trade off, and you think you have not.
You guys didn't figure this out for yourselves. You are all circle jerk followers
of a save money religion.
But, I sell 1 pound to the clinic and I have my money back. Idiots.
Last edited:
Doer
Well-Known Member
High Watts grows Pot.
It has nothing to do with efficiency which is only about the cost of production.
One candle will heat a room. Is that your idea of efficiency? Why suffer for "efficiency?"
A sick joke though real, in Industry where I work, is the "efficiency experts."
They make giant fees to tell us about Trade Offs. These pitiful "effete experts" of RIU don't even
know about their own trade offs.
It has nothing to do with efficiency which is only about the cost of production.
One candle will heat a room. Is that your idea of efficiency? Why suffer for "efficiency?"
A sick joke though real, in Industry where I work, is the "efficiency experts."
They make giant fees to tell us about Trade Offs. These pitiful "effete experts" of RIU don't even
know about their own trade offs.
Doer
Well-Known Member
IAC, drivers are suppose to ship today.
Scheduled to ship: 3/13/2015
HLG-185H-C1400A x 10
MEANW 1400mA LED Driver IP65, PFC, Metal Case High Output Voltage Range
Scheduled to ship: 3/13/2015
HLG-185H-C1400A x 10
MEANW 1400mA LED Driver IP65, PFC, Metal Case High Output Voltage Range
Doer
Well-Known Member
Next I'll order the sink, the aluminum sheet and the bilge blower. I'll also get a couple of CXA COBs
This will allow me to:
- wire one driver with 2 COBs
- create drill template
- tap for 2 COBs and mount them at one end in proper spacing for 10
- bend the shroud
- attach it to the sink
- get final cross section
- cut a heat forming mandril from wood to cross section
- heat form the PVC adapter
- attach blower to adapter
- attach blower/adapter to Air Rail(tm)
Now I can do a first test. I'll fire it up, let is stabilize and read the temperature gradient from the end with the COBs to the end with the blower.
A good start and probably 60 days, since I also need to move in, unpack tools, set up work bench, etc.
But he is doing it WRONG!!! boo hoo hoo.
This will allow me to:
- wire one driver with 2 COBs
- create drill template
- tap for 2 COBs and mount them at one end in proper spacing for 10
- bend the shroud
- attach it to the sink
- get final cross section
- cut a heat forming mandril from wood to cross section
- heat form the PVC adapter
- attach blower to adapter
- attach blower/adapter to Air Rail(tm)
Now I can do a first test. I'll fire it up, let is stabilize and read the temperature gradient from the end with the COBs to the end with the blower.
A good start and probably 60 days, since I also need to move in, unpack tools, set up work bench, etc.
But he is doing it WRONG!!! boo hoo hoo.
Last edited:
Doer
Well-Known Member
And you are simply hot air. All sound an fury with no significance.
This is planning and I have a plan and you don't like it, droid. Not nothing, a plan. And believe it or not it was your idea and a good one.
This is not the first Church I've busted on RIU, but certainly the easiest to crumble.
This is planning and I have a plan and you don't like it, droid. Not nothing, a plan. And believe it or not it was your idea and a good one.
This is not the first Church I've busted on RIU, but certainly the easiest to crumble.
nogod_
Well-Known Member
So much furious tinkering to reinvent the wheel.
You just verified that temperature is not the enemy, increasing current is. Yet you insist on running your emitters at 1.4a. How about this, take your own advice? Stop trolling yourself? Forced air is not going to help your rig make sense.
The only thing that makes sense is taking your plans, dumping them in the trash, and buying some new bulbs for your hps.
You just verified that temperature is not the enemy, increasing current is. Yet you insist on running your emitters at 1.4a. How about this, take your own advice? Stop trolling yourself? Forced air is not going to help your rig make sense.
The only thing that makes sense is taking your plans, dumping them in the trash, and buying some new bulbs for your hps.
Doer
Well-Known Member
You seem rather apoplectic about all this. Have you wonder why you take this all so personally?