Club 600

DST said:
@Mensa: are the plants in soil or hydro? If soil it may be that the root zone hasn't developed well enough, and if so did you repot them yourself as I remember you saying you were gifted plants from someone to grow?
Click to expand...

DST i was convinced to di a soil/coco/perlite mix awhile back. Let me get some pics up.
 
I put my post per page down to "Forum Default" to get around riu today. Some can get away with 20 per page.
At forum default level, there are 7315 pages. :-(

*edit: what cof said :-)
 
supchaka said:
I know its only been a day but with a flash again? This fuckin guy just won't stop posting his sheeeeeeit! Not Headband day 50!
DSC03266a_zps50b1a1e1.jpg

DSC03278a_zpsf93b986a.jpg

DSC03271a_zps8ef55e3c.jpg

DSC03273a_zps7b769d2f.jpg

DSC03276a_zps346fd876.jpg
Click to expand...





[video=youtube;wW_0WF1bcJo]http://www.youtube.com/watch?v=wW_0WF1bcJo[/video]
 
Cheers gigs not long now for the cream haha my honey tube should be hear soon and I'm ordering my titanium nail tomorrow I think
 
supchaka said:
Quit fluffing your count man! At least upload pics with little to no change from the previous ones like I do!
Click to expand...

How's about totally off topic pics instead?


Finally got the new exhaust installed today:
*2.5-lbs lighter than stock exhaust, and twice the inside diameter for the pipe
**also modded the intake to match the exhaust & FI controller
doobiebrother-80939-albums-e-ihf-i-ehf-ie-hf-ie-hf-efhi-efh-e-hf-ewfh-ew-hf-ew-hf-rwhf-ew-yf-ew-yf-picture3005125-img-5963.JPG



***And will be deleting the rear fender before I'm done for the day
doobiebrother-80939-albums-e-ihf-i-ehf-ie-hf-ie-hf-efhi-efh-e-hf-ewfh-ew-hf-ew-hf-rwhf-ew-yf-ew-yf-picture3005126-img-5961.JPG



And then I wired in the iMap fuel injector controller:
*just need to friction tape the harness back together before re-assembly

doobiebrother-80939-albums-e-ihf-i-ehf-ie-hf-ie-hf-efhi-efh-e-hf-ewfh-ew-hf-ew-hf-rwhf-ew-yf-ew-yf-picture3005135-img-5955.JPG



Next will be removing the handlebar covers and front fender to prep them for paint:

doobiebrother-80939-albums-e-ihf-i-ehf-ie-hf-ie-hf-efhi-efh-e-hf-ewfh-ew-hf-ew-hf-rwhf-ew-yf-ew-yf-picture3005127-img-5959.JPG



And disassemble the rear plastic & remove the lights so I can get them ready for paint:

doobiebrother-80939-albums-e-ihf-i-ehf-ie-hf-ie-hf-efhi-efh-e-hf-ewfh-ew-hf-ew-hf-rwhf-ew-yf-ew-yf-picture3005128-img-5964.JPG


But first, I'll reward myself with some bongage, and then some lunch.
bongsmilie
 
and, way to Doob for being willing to get in there and do the shit yourself on the scoot! I bet it will sound a ton better with that exhaust on there. I'm curious what type of power gains you'll get from everything you're doing. You'll have to a post test ride report for us.
 
I have a question if anyone can help. I have a 4x4 tent and its in my basement that just fits in the room but i cant use the back door at all. so my only way in or out of the tent is the front. I am going to run a flood and drain table but a 4x4 table in the tent i can not move or reach the the back half at all. I was wanting to try scrog but i dont think its doable at all. should i use a 3x3 table so i can move around somewhat and reach all my table? Again this is new to me and maybe i am overlooking something any help/input and or advice would be great. thanks
 
Dezracer said:
and, way to Doob for being willing to get in there and do the shit yourself on the scoot! I bet it will sound a ton better with that exhaust on there. I'm curious what type of power gains you'll get from everything you're doing. You'll have to a post test ride report for us.
Click to expand...

Mohican said:
Oh he will! With a helmet cam, narration, and music :)
Click to expand...


You know I will! :-)
I'll be close to doubling my horsepower, so we shall see. :-)
 
man doubling the power of a scooter sounds like danger to me, lol



[video=youtube;HHrO-F8KHs4]http://www.youtube.com/watch?v=HHrO-F8KHs4[/video]
 
You must log in or register to reply here.
Back
Top