Not tryna hijack your thread or anything.
Second one I built. (4) Sammy F562b 560mm 4ks running on a HLG-150H-24B (3) Sammy F562b 560mm 3ks running on a HLG-120h-24A. And (2) older Cree cobs I had laying around. Cxa3050s in 4k running on a 1800mA CC Chinese driver in parallel so only getting 900mA each. But they were designed to each be a driver. 1800mA I got 4 drivers and 4 cobs. But only used two cobs and 1 driver.. Mounted on cpu heatsinks active cooling. I'm not a cob fan. So I'm pulling them off. And putting the new L06s I jus ordered in the gaps between the sammies.
Running just over 330 watts in a 32x32 tent. Flower only. Just over 45w per sqft.
View attachment 4251280
First one I built. (10) Samsung F562b in 3k on a HLG-320H-24B driver. (5) Samsung Sunboards 96 lm561c diodes in 2700k on a HLG-240-24B driver. And (4) custom made 120 diode copper pcb strips. 60 of each Far red and 660nm HE Photo reds. Alternated. So they blend together. On a Meanwell LPV-60 driver. But I made custom heatsinks so I saved a ton of money with not having to buy anything. I just took 2x2 thickwall aluminum tubing. And cut 3 sidesi. And mounted the strips on the uncut side. And then mounted 50mm × 50mm PC fans on each tube inside on one end. And I used sonoff wireless switches to control everything. It has a temp sensor that controls 120v switch. So I mounted the thermocouple inside the heatsink right against the backside of the led. And set points for the fans to kick on n off with the sensor. So they dont run all the time. All controlled from my phone anywhere.
View attachment 4251279
