• Here is a link to the full explanation: https://rollitup.org/t/welcome-back-did-you-try-turning-it-off-and-on-again.1104810/

bending light?????

scwascwa

scwascwa

Well-Known Member
hey guys i have a grow box ive been growing in and on each side i cut holes and installed fans

my question is does anyone kno a way for me to keep light out of the box now that theres two holes

i want to start buddin but the two holes will let in light when its not supposed to ... anyone have any ideas for me please???


cut the two holes on the left and on the right as shown.. it has another fan on the opposite side
 

Attachments

scwascwa

scwascwa

Well-Known Member
i need you experts like fdd and luda can yall help me out or anyone at that??? i dont want em to turn hermi cause of excess lighting
 
dew-b

dew-b

Well-Known Member
scwascwa said:
hey guys i have a grow box ive been growing in and on each side i cut holes and installed fans

my question is does anyone kno a way for me to keep light out of the box now that theres two holes

i want to start buddin but the two holes will let in light when its not supposed to ... anyone have any ideas for me please???


cut the two holes on the left and on the right as shown.. it has another fan on the opposite side
Click to expand...
build a light trap over the holes.
 
Z

z4qqqbs

Well-Known Member
put a 90 degree casing on it so its pointing down make sure the material is black tho..........ur opening will be facing down and it will bend to ur hole problem solved
 
DW4174

DW4174

Well-Known Member
I would buy a couple peaces of pvc pipe big enough to fit over the hole and and put a couple of angles so light wil not travel up the tube. On the intake side I would first angle it behind the box and then down so no light will travel and I would take the tube close to the floor to get good cold air. The exhaust side I would have it go around the back just like the intake side and then up instead of down to let that hot air rise and once agian no light should travle back into the box.

Hope I was of help,
Good Luck
 
scwascwa

scwascwa

Well-Known Member
thanks guys that helped a lot toook a lot off my shoulders ...

will it be ok if i bend metal instead of pvc or is pvc better cause if it is ill go buy it... my girls get the best :)
 
DW4174

DW4174

Well-Known Member
I guess metal would do. Always use what you can untill you get money burning a hole in your pocket then spent it. The old saying is "if it aint broke dont fix it" so if what you use works then dont worry about what its made of.
 
mkay420

mkay420

Active Member
man i was just wondering the same thing and came tothe same conclusions and will probly just be using metal ducting haha WEIRD... you get +rep just for thinking like me and asking the question right before i was gonna!!
 
stoner79

stoner79

Member
what about a bit of ducting bigger than the fan and duck tape that to the wood?
or make a couple of boxes to cover the fan?

just a couple of idea's for ya........:bigjoint:
 
scwascwa

scwascwa

Well-Known Member
wat do u mean by making a couple boxes over the fans????

mkay i like the way u think lol thanks for the rep gonna have to give ya some for also thinkin like me lol
 
stoner79

stoner79

Member
scwascwa said:
wat do u mean by making a couple boxes over the fans????

mkay i like the way u think lol thanks for the rep gonna have to give ya some for also thinkin like me lol
Click to expand...
sum times the simple idea's are the best....lol...:)

im thinking to make sum boxes get a couple of old plastic tubs( cardboard boxes?) or sumthing along them lines but make sure no light can penetrate thru them(black paint?),cut a few vent lines in to them or sum wee holes so the air can still flow ok, then screw them to the wood or silicon them on.
and that should b the job dun..:)
:joint:
 
scwascwa

scwascwa

Well-Known Member
so you mean make like a nice sisze cube out of cardboard then put over the pans seal em then get som tube and bend it down?????
 
stoner79

stoner79

Member
scwascwa said:
so you mean make like a nice sisze cube out of cardboard then put over the pans seal em then get som tube and bend it down?????
Click to expand...
yeah make the cube bigger than the fan area so u can fix it down and seal it up proper.

are you using metal ducting into the box then?

may b easier to just get sum bigger ducting to go around where the fan sits n just fix it straight on?

total ghetto mod but works...haha......bongsmilie
 
scwascwa

scwascwa

Well-Known Member
bongsmilieya the ducting will deff be bigger than the fan so that i can get as much airflow as i can might try this cardboard box method :) after i get off work though ya';; have a good day gotta go make the cash ha gotta rip the bong first
 
DW4174

DW4174

Well-Known Member
The girls are beautiful good job! How tall?
I agree the box sounds like a good idea but if the ducting is bigger than the fans it shal do
 
scwascwa

scwascwa

Well-Known Member
well the ones in the box are about 2 to 2 1/2 ft tall and the other beauy's are about 4 foot tall
 
You must log in or register to reply here.
Top