paperfetti
Well-Known Member
"s" turn inside what.remember i know nothing
Al B. FAQt
- Thread starter Al B. Fuct
- Start date
- Status
paperfetti
Well-Known Member
yes my meter does record temps high/low..i still cant figure out what happend with 1 plant looking like beige paint was splashed on it..i flushed system and put fresh ph'd water in ther today..leaves are feeling alot better than before so im hoping things are turning aroundgiving you your money's worth.A thermometer that remebers the high & low temp extremes. Without a peak mem thermometer, you don't know how hot it's getting. You said in another thread that your temps were touching 86F and you 'knew that was OK.' It ain't. CFLs make heat, too. If your air temp is wandering up to 86F, you can induce heat damage with CFLs.
doktorgreenthumb420
Well-Known Member
hey paperfetti ppp is Pure power plant from nirvana and i have not had trouble with it before until this plant it wasnt the plant tho ppp is very nice smoke and grows excellent with Sog i really recommend it i have tried about 9 or nirvanas seed types and my favorits would have to be
1. K-2
2. ppp
3. big bud
4. white widow
those are bomb ass strains and k-2, ppp, and white widow are all very strong smokes
they have a nice high i am still playin with big bud i like it cause it is very healthy and resilient plant ....also i had a Northern lights from nirvana and i grew it with soil and hydro lol i thought maybe it would have burned it but it was just right and seriously to date has been the most i ever got off a plant 2 oz of it and it was premium smoke also that northern lights strain smells like a friggin rose until it is chopped down and cured then the smell all of a sudden comes on and it has great smell after cured very nose catching stuff ...i only got one of the 10 to be female and live but it did that 2 oz thing ...so i cant really say much about it cause i dont have a couple grows of that under my belt
if you want a nice producer for sog i say ppp is very nice choice
if you want a nice little christmas tree type plant i say get k-2
and if you want a no smell plant get Northern lights
i have high hopes for northern lights tho and it might start being a staple strain around my grow here is a pic of my bloom room if you interested
oh and i found out that my water is really bad quality and i will have more info on aerocloning the ppp once i try distilled water instead of water out of sink
overall ppp is one of my favorites
also tryed snow white , from nirvana it is very nice and can produce alot of weight but it does take a good week or two longer to bloom which is not acceptable for my setup
also that is a cool little grow box you made hmm i will show setup on next reply i forgot i was doing the post quick reply thing and i dont know how to put a pic on this way
1. K-2
2. ppp
3. big bud
4. white widow
those are bomb ass strains and k-2, ppp, and white widow are all very strong smokes
they have a nice high i am still playin with big bud i like it cause it is very healthy and resilient plant ....also i had a Northern lights from nirvana and i grew it with soil and hydro lol i thought maybe it would have burned it but it was just right and seriously to date has been the most i ever got off a plant 2 oz of it and it was premium smoke also that northern lights strain smells like a friggin rose until it is chopped down and cured then the smell all of a sudden comes on and it has great smell after cured very nose catching stuff ...i only got one of the 10 to be female and live but it did that 2 oz thing ...so i cant really say much about it cause i dont have a couple grows of that under my belt
if you want a nice producer for sog i say ppp is very nice choice
if you want a nice little christmas tree type plant i say get k-2
and if you want a no smell plant get Northern lights
i have high hopes for northern lights tho and it might start being a staple strain around my grow here is a pic of my bloom room if you interested
oh and i found out that my water is really bad quality and i will have more info on aerocloning the ppp once i try distilled water instead of water out of sink
overall ppp is one of my favorites
also tryed snow white , from nirvana it is very nice and can produce alot of weight but it does take a good week or two longer to bloom which is not acceptable for my setup
also that is a cool little grow box you made hmm i will show setup on next reply i forgot i was doing the post quick reply thing and i dont know how to put a pic on this way
doktorgreenthumb420
Well-Known Member
these are my pics of bloom room and some mother plants
Attachments
paperfetti
Well-Known Member
well now im stoked i got PPP fem. man -o- man...havent heard to many good thing about nirvana's jock horror,but ever had shiva?..i got that too crossed with nothern..i hope its good..my next order (which will probably be a xmas present to me) will be attitude..heard excellent things bout those dudes but thanx for the info
MrHowardMarks
Well-Known Member
Doubt Al B. will see this, I might just PM you.
We were talking about the pH truncheon from bluelab about a month or so ago, I think it hadn't come out yet.
Anyway, I was searching for an electrode replacement and found that the PH truncheon is out and available. Just a heads up.
We were talking about the pH truncheon from bluelab about a month or so ago, I think it hadn't come out yet.
Anyway, I was searching for an electrode replacement and found that the PH truncheon is out and available. Just a heads up.
deerslayer
Active Member
Can you answer this one Mr. ABF
When taking clones to determine the sex of a new strain that was put down, two of the four started bleeding purple sap, the other two had normal looking clear colored sap. All four get the same nute mix and are the same age. There was two clones taken from each plant to use for determining sex.
Have you ever seen purple colored sap?
Even if you have never seen it do you know what causes it?
Is it a good, bad, or indifferent thing to see/have?
When taking clones to determine the sex of a new strain that was put down, two of the four started bleeding purple sap, the other two had normal looking clear colored sap. All four get the same nute mix and are the same age. There was two clones taken from each plant to use for determining sex.
Have you ever seen purple colored sap?
Even if you have never seen it do you know what causes it?
Is it a good, bad, or indifferent thing to see/have?
NLXSK1
Well-Known Member
Could you tell us the nutes you are using along with any additives?
MrHowardMarks
Well-Known Member
Purple sap, never seen it.
Al B. I know you can answer me this one easily-
Where do you get your replacement electrodes for your Eutech pH pro series 2?
I've been searching, and can't find on in the states, my hydro store said they'd sell me their used on for 65 bucks I told them they're crazy, it's like 35 bucks if I can find it. I ran a search and I think you and me are the only ones that use the Eutech meter. Thanks.
Al B. I know you can answer me this one easily-
Where do you get your replacement electrodes for your Eutech pH pro series 2?
I've been searching, and can't find on in the states, my hydro store said they'd sell me their used on for 65 bucks I told them they're crazy, it's like 35 bucks if I can find it. I ran a search and I think you and me are the only ones that use the Eutech meter. Thanks.
GypsyBush
Well-Known Member
YO GYPSY ARE THOSE AIR DUCTS CONNECTED TO YOUR COOL TUBE ON BOTH ENDS?
I just mean that as the ducting enters the tent (horizontal), it turns sharply 90 degrees down (vertical) and then makes another 90 degree turn into the cool tube (horizontal again)...
The shape created by the consecutive turns is commonly referred to as an "S Turn"... and since it all happens inside of the tent.... an "S" turn inside... it seemed logical when I wrote it... sorry...
Hope this helps...
Cheers...
Gypsy...
Attachments
Return of the Spork
Well-Known Member
Is that a 4 inch hooked to a 6 inch tube? How well does it work? And do you prefer the solid ducting over the more flexible kind? Id imagine it would have a lower coefficient of resistance but I was worried it wouldn't fit well when the light got raised in my setup.
GypsyBush
Well-Known Member
I am starting to feel uneasy answering questions in Al's thread...
I hope he doesn't get mad at me...
With the tent fully closed, high temp at "plant top" level has been 78F... and I don't even have the right exhaust fan in yet.... 265 CFM will replace the 80CFM exhaust in a few days...
I chose it because it will hold it's shape, as opposed to drooping between support points..
Hope this helps...
Gypsy...
Ps. I hope you guys know that I am just a newb... asking me questions is a very tricky thing... as I don't know very much about anything at all... so... uh ... Al.. set them straight, will ya.... lol....
Sorry Al.... no disrespect intended... you can have your thread back...lol....
I hope he doesn't get mad at me...
Yup 6" cool tube with an adapter to the 4" duct...Return of the Spork said:
With a 170 CFM fan, I can have 600 watts 10" from my babies, without heat issues...Return of the Spork said:
With the tent fully closed, high temp at "plant top" level has been 78F... and I don't even have the right exhaust fan in yet.... 265 CFM will replace the 80CFM exhaust in a few days...
It is not solid, it is semi-rigid... it still stretches and bends like the "foil" type ducting... just not quite like a slinky...lol...Return of the Spork said:
I chose it because it will hold it's shape, as opposed to drooping between support points..
Don't know your set up, but if you can use the thin foil/spring type ducting, you can use this stuff... takes no more room... maybe a slightly bigger 180 deggree turn radius... but no diff. on 90* turns...Return of the Spork said:
Hope this helps...
Gypsy...
Ps. I hope you guys know that I am just a newb... asking me questions is a very tricky thing... as I don't know very much about anything at all... so... uh ... Al.. set them straight, will ya.... lol....
Sorry Al.... no disrespect intended... you can have your thread back...lol....
GypsyBush
Well-Known Member
and this is what I meant by no drooping...
I can even make a "snorkel" to gather AC air....
Cheers...
paperfetti
Well-Known Member
damn i want mines exactly like that..can u tell me what u have as far as the parts connected to tube,so i know what to ask for when i go to home depot..like a list i can write down..if too much i understand...i took cuttings from a plant i had outside and tried to put 600 watt hps in a homebox S (yes "s" meaning small lol)and it was on fire in there..i dont have ducts running like you do,so i know i could have gotten it cooler,but it didnt seem like i was going to be able to get it where i need it to be do to box being so small..so needless to say my cuttings died and this is all i have left..pic 2 is where the hps will be once i switch plants that are in bubbler to 12/12..which will be hopefully in a week..but i dont know what to do with plant that was outside getting cold in the meantime
thanx a milli
thanx a milli
paperfetti
Well-Known Member
sorry pics here
Attachments
GypsyBush
Well-Known Member
All right man.. but I am kicking us out of here...paperfetti said:
Come over to my thread... I'll help all I can over there... this is not the place...
The tent build starts on page 21... here... click on the red square... the one next to my name...
Cheers..
deerslayer
Active Member
3 part GH with 35% H2O2 thats it.
I dont think that has anything to do with it, because these two were the only two that have ever done it.
SpruceZeus
Well-Known Member
https://www.rollitup.org/indoor-growing/122962-ufo-led-hps-250w.html
Dear uncle Al, please take a moment out of your busy day to read this thread and school the LED junkies within as to the ineffective and unproven nature of LEDs. If you could find the time it would be greatly appreciated, it seems i am not successful enough of an HID grower to make the point and i was hoping someone with a bit of clout could step in and set these xmas tree light gardeners straight.
Thanks bundles!
-SpruceZeus
Dear uncle Al, please take a moment out of your busy day to read this thread and school the LED junkies within as to the ineffective and unproven nature of LEDs. If you could find the time it would be greatly appreciated, it seems i am not successful enough of an HID grower to make the point and i was hoping someone with a bit of clout could step in and set these xmas tree light gardeners straight.
Thanks bundles!
-SpruceZeus
toast master
Well-Known Member
Hey Al .... havent had the time to stop in and b.s. a little , had to take some out of town work to stay on top of things... if there is such a thing ...
Had to figure a way to automate my clone watering and h202 dosing... been running on its own for 3 weeks now ... i get a chance ill pop out some info on it .. got it done for about $ 20 ea.... works well andno more daily hand watering clones .... hope all is well with you ... talk soon..
Had to figure a way to automate my clone watering and h202 dosing... been running on its own for 3 weeks now ... i get a chance ill pop out some info on it .. got it done for about $ 20 ea.... works well andno more daily hand watering clones .... hope all is well with you ... talk soon..
NLXSK1
Well-Known Member
- Status