Are you talking true aeroponics or low pressure which isn't really aeroponics but is called that a lot.My sprayer heads keep getting clogged with little plant debris. Can anyone recommend a way to stop this?
TIA
AH, OK, low pressure. Yeah, i tried high pressure. It is really a pain in the ass.I bought a BlueLab, I also double check with a Milwaukee. Using two gives me that peace of mind, after not really trusting PH testers. The Milwaukee is always off by .2 I've noticed, 5 min after it has been calibrated. Blue Lab is more accurate.
Got bags coming.
I don't use a chiller.
Yes low pressure aeroponics
Calmag, synthetic NPK, Hydroguard. under 3000k light. Any Suggestions for flavor?
is there really any benefit to turning the pump off? I would just let it run. The point of aeroponics is to create a very fine mist, like sub 40 micron droplets. You give your roots a very quick burst of this every few minutes, and due to the droplets being so small the plant rapidly absorbs the nutrients. But the trick is to not let the roots get too wet or too dry. This also allows for a dramatic decrease in water usage, which is great for parts of the world where fresh water is an issue. Just spraying the roots at low pressure doesn't really do this, it just acts more like NFT. If you are recycling your water you will have a lot of trouble chasing around the PH and EC. This is in part due to rapid evaporation. By constantly creating a mist you lose a lot of water, but the EC doesn't drop at the same rate, so the EC spikes and so does the PH. To solve this, you need a huge buffer tank. I use a 110 gallon plastic cattle tank (i am just doing bato buckets and nft, not aeroponics)300GPH pump, connected to 1/2 inch PVC, 360 sprayers, 15 min off and on cycle
Yes there is benefit from cycling the pump, it's the heat created by a pump running continuously .is there really any benefit to turning the pump off? I would just let it run. The point of aeroponics is to create a very fine mist, like sub 40 micron droplets. You give your roots a very quick burst of this every few minutes, and due to the droplets being so small the plant rapidly absorbs the nutrients. But the trick is to not let the roots get too wet or too dry. This also allows for a dramatic decrease in water usage, which is great for parts of the world where fresh water is an issue. Just spraying the roots at low pressure doesn't really do this, it just acts more like NFT. If you are recycling your water you will have a lot of trouble chasing around the PH and EC. This is in part due to rapid evaporation. By constantly creating a mist you lose a lot of water, but the EC doesn't drop at the same rate, so the EC spikes and so does the PH. To solve this, you need a huge buffer tank. I use a 110 gallon plastic cattle tank (i am just doing bato buckets and nft, not aeroponics)
how big of tank are you using? how big is your setup?
I never had issues with anything spiking using LPS. What I did have was issues in the root chamber with temps getting to high and getting rot so I started to chill the water and yes running the pump in cycles does help with heat. I also added reflective wrap to the top of the chamber to reflect the heat.is there really any benefit to turning the pump off? I would just let it run. The point of aeroponics is to create a very fine mist, like sub 40 micron droplets. You give your roots a very quick burst of this every few minutes, and due to the droplets being so small the plant rapidly absorbs the nutrients. But the trick is to not let the roots get too wet or too dry. This also allows for a dramatic decrease in water usage, which is great for parts of the world where fresh water is an issue. Just spraying the roots at low pressure doesn't really do this, it just acts more like NFT. If you are recycling your water you will have a lot of trouble chasing around the PH and EC. This is in part due to rapid evaporation. By constantly creating a mist you lose a lot of water, but the EC doesn't drop at the same rate, so the EC spikes and so does the PH. To solve this, you need a huge buffer tank. I use a 110 gallon plastic cattle tank (i am just doing bato buckets and nft, not aeroponics)
how big of tank are you using? how big is your setup?
It was a great producer but I had heat issues and sprayer issues but that was no big deal as there were 16 spray heads for 6 plants so if a few failed there was still lots lol. I just found the flood and drain worked as well with less issuesI find that if I keep the outside of my tent at 70, then let the lights handle the other 4-5 degrees, everything stays nice. It really helps to conserve power, this new setup. I grow organic in dirt also. I like to test things. This new synth fert + aero bin really has decreased my veg time. Lets see how the buds do.
So in a nut shell, less power, faster growing plants, minimal amounts of water needed -ro system(lol), less heat and I can allow my plants to get closer to the light and dim those if need be. I like progress. We'll see how flower goes, before I make my mind up. But regardless this is my select choice for veg.