Search results

  1. tommyinajar

    Can you add a Dimmer to a Spider Farmer with aftermarket dimmer and if "nay",why not?

    ok ill look, I don't think the Meanwell says dimmer anywhere~` How about the Maxisun, work with a fan dimmer or not? https://smile.amazon.com/MAXSISUN-Spectrum-Horticulture-Greenhouse-Hydroponic/dp/B07QH4KFBQ/ref=cm_cr_arp_d_product_top?ie=UTF8
  2. tommyinajar

    Need a DIY cloner, a BIG cloner-maybe 300?

    If the kiddie pool could mount vertically I'm in. No, I've got it closer to getting to be figured out, but I'm trying to fit a jillion clones in a small area or I'd use a flood table......hmmmmm (underneath a flood table)
  3. tommyinajar

    Need a DIY cloner, a BIG cloner-maybe 300?

    Ok, everyone, 95% are using sprayers? HOW?!? Mine plugged by 50% most every time I actually looked, I was careful cleaning and filtering, but they always plug. You change out weekly? Drill them out? 500 psi pump? Full of shit? Some unknown supplier of plug-proof sprayers?
  4. tommyinajar

    Can you add a Dimmer to a Spider Farmer with aftermarket dimmer and if "nay",why not?

    ^that^^ I bought a refurb and no dimmer, can you dim it. How do you know if you can dim an led or not? I've got a Maxisun I'd like to use for seedlings too.
  5. tommyinajar

    Need a DIY cloner, a BIG cloner-maybe 300?

    LOL My limits lasted about 6 months- Now 4k+ I'm running around like a headless chicken- We are growing a garden full in a small bedroom. I could spend 2 hours every day on it and not be 100% on schedule. Plus it isn't here, so to tend I've got to travel.
  6. tommyinajar

    Need a DIY cloner, a BIG cloner-maybe 300?

    Yea I was clone king -then I had an incredible string of misshaps- went to seed for years. I must have offed 500 clones at least. Circut breaker trips, plugs fell out, left unplugged, blew out the outlet, mechanical timer got stuck, sprayers all plugged-get the picture? :)
  7. tommyinajar

    Need a DIY cloner, a BIG cloner-maybe 300?

    Home-made or Amazon? I forgot about bubblers, I actually ran one for 6 months, but the stones or water level was a problem if I remember, needed a float set up. Anyone not use collars and 2" cups? I still put at least 3 in each one, but 99% I get 2 or less, I take lots of tweener clones so...
  8. tommyinajar

    Need a DIY cloner, a BIG cloner-maybe 300?

    I like to KISS things. I want to only change 1 tank, not three or 4, and I'm DIYing it. Not spending $150 for $6 of plastic and a pump..... :)
  9. tommyinajar

    Need a DIY cloner, a BIG cloner-maybe 300?

    AND- while U R here, How many clones do you guys do per collar? I've tried 5 but 2 only ever grow. Does anyone use a non-sprayer design? And am I the only one that enjoys taking tiny little branches and try to clone them. I've got collars cut horizontally 3 times, so the stem-like poke...
  10. tommyinajar

    Need a DIY cloner, a BIG cloner-maybe 300?

    Hey - am I the only one that grows a lot of clones? I found everyone I know wants some and I like SOG with 30 +plants, 2-week veg- I've built a few 12? cloners and my biggest is 72 (I could add 20 more) anyone do a lot of clones? How are you set up? I was going to build a tower of these in...
  11. tommyinajar

    Wiring up 2 Meanwell drivers & dimmer to a Meijiu MAJO-V1.2-1000H-9- I'm lost!

    Yeah, and the supplied wire is so cheap the blue fell out of the Wago. You can strip the wire with your finger, how cheap can they get. I'm actually using the dimmer, at about 80% LEDS themselves look good,, drivers look genuine no fakes.
  12. tommyinajar

    Wiring up 2 Meanwell drivers & dimmer to a Meijiu MAJO-V1.2-1000H-9- I'm lost!

    What is the point of a 0-10v vs a pot? I found this when looking, any good? Better than Rapds, maybe? https://www.amazon.com/Controller-Dimmable-Electronic-Ballasts-Controling/dp/B0912Y2ZQX/ref=sr_1_16?dchild=1&keywords=0-10v+dimmer&qid=1619997630&sr=8-16
  13. tommyinajar

    Wiring up 2 Meanwell drivers & dimmer to a Meijiu MAJO-V1.2-1000H-9- I'm lost!

    It works...kind of. It lights up bright but it seems the lights are not dimming equally somehow? I agree there is a lot of extra sh*t on the board, component-wise. It works and I've got 2 dimmers from the LED place so not too worried.
  14. tommyinajar

    Wiring up 2 Meanwell drivers & dimmer to a Meijiu MAJO-V1.2-1000H-9- I'm lost!

    gotcha! Going to plug it in, I went and got a few Wego's instead of that 2 wire crap. I can't believe the cheapness of the extras" and no instructions
  15. tommyinajar

    Wiring up 2 Meanwell drivers & dimmer to a Meijiu MAJO-V1.2-1000H-9- I'm lost!

    So the last pic Alibaba sent me showing the wires & video is wrong?
  16. tommyinajar

    Wiring up 2 Meanwell drivers & dimmer to a Meijiu MAJO-V1.2-1000H-9- I'm lost!

    I took 1 look at the dimmer in a pile of parts and almost tossed it before hand. The best I can figure is the blue and brown pair of wires coming off each driver are supposed to be joined by the red n blue connector (TOTAL JUNK, $800 light, & .02 wires:( ) So it's Brown+Brown to red and...
  17. tommyinajar

    Wiring up 2 Meanwell drivers & dimmer to a Meijiu MAJO-V1.2-1000H-9- I'm lost!

    Will that dimmer work ok with a 1000w or might I need this- https://rapidled.com/products/coralux-storm-led-controller-with-10v-analog-converter
  18. tommyinajar

    Wiring up 2 Meanwell drivers & dimmer to a Meijiu MAJO-V1.2-1000H-9- I'm lost!

    Where did you find THAT?!? I GOOGLED for 2 days. Im looking now....
  19. tommyinajar

    Wiring up 2 Meanwell drivers & dimmer to a Meijiu MAJO-V1.2-1000H-9- I'm lost!

    Hiya- I got a MAJO-V1.2-1000H-9 for Alibaba and it came with 1 useless schematic, no other instruction- Anyone has a clue how this assembles? 3 short wires, 3 outlet plugs, the dimmer is in pieces even. Everything I googled doest match-someone? ANYONE??? The last pic is the help I got from...
  20. tommyinajar

    Dimmer hookup wiring issues Majo Meijiu 1000 watt

    I'm actually a little worried about hanging his thing, got to be 75 lbs at least
Top