Search results

ok This is what I got from this post. Bob and Ted left at the same time going in opposite direction at 55 mph. If you add water and stir. Who will get sun burn first on there TV's.

No that box does not have one in it. What you see are two on/off switches that each control four cobs of the eight cobs. I built this box. It had no cut outs or holes in it. I drilled and mounted everything on it.

Get a box and mount something like this in the box. https://www.amazon.com/gp/aw/d/B0123C8392/ref=mp_s_a_1_6?ie=UTF8&qid=1466712761&sr=8-6&pi=AC_SX236_SY340_QL65&keywords=c-14&dpPl=1&dpID=41yVMcGjSyL&ref=plSrch So you have some thing like this. I mounted a switch to turn mine off with. To...

You said it right there. And I quote "in my setup". LEDs are not for every type of grow just as DEs are not good for every type of grow. I could never run a DE in my grow area. Way to hot and to low of ceilings. So in my grow area LEDs would kick the hell out of DEs.

Relax it was just a joke. Dont take it so serious. Wasnt trying to get you upset. Sorry.

Yes like said above you asked for high yield in a small area. Like 4.5 pounds in a 4x6 area. I get 5 pounds regularly in a 5x7 area. I do that with two 1000 watt hps bulbs stacked vertically. And that 35 square foot includes room to move around the grow in. Look at the linked picture to see...

Yes it is I. They just dont have the info on LEDs there.

I dont have pictures right now. They are on a different site. I will not link it because it is not right to do on this site. But it is not what you think. It is a vert scrog run with two 1000 watt hps bulbs. But here is a goggle of my grow...

Damn mine is 5x7 and I get 5 pounds. But it is with HPS.

I really cant say for sure. I am just spitting back out what I have read here. Others will have to tell as I have not run this yet on a flower run.

I am not sure who you are directing this question to so I will answer for mine. Mine is spaced so that I can use 2 of these side by side to cover a 5x5 area. According to Supra 4 of these cobs run at 49 watts like my set up will give 824 PPFD in a six square foot area. So mine in a 25 square...

Well could not have done it with out you and others here leading the way. Just a copy of others mostly.

I like it.

I run both. This light is for a flat run. But I guess I should also mention I have only done one horizontal grow ever. It was a scrog with five plants vegged up to five days and flowered for 10 weeks under a 600 watt HPS that yielded about 19.5 ounces. But I have done to many to count...

Here is the inside of the channel. The wires are hot glues in place. The box is before the glands are installed and is the on off switch box. The one where the wires come out of the channel is before I covered the wires with more c channel. The box with the wires and wago connectors is the...

I dont know if it does or not. Just told to use it so I did. Didnt cost much more or less.

Ok what do you want close ups of?

It is aluminum painted black. One coat of etching primer and two coats of semigloss black. The wires are buried in aluminum c channel which is covered by black aluminum coil stock bent to fit over the c channel. The cover is then attached with rivets to the c channel.

I got them at Menards and Home Depot. They are 4x4x2 inch junction boxes. I drilled the holes for the glands and the plug sockets. Here is what they look like before I drilled them out...

Thanks but I did mess it up a little. I set my dimming box to far from the drivers. Then the cords from the drivers would not reach the glands on the box. So I moved it closer but it exposed the wires from the cobs. Originally they were to come up threw the back of the control box so that...