Search results

Any tip on what voltage should I drive them? I can't find a clear answer on this topic.

I can control the voltage as I'm using a CV driver: MeanWell 320H-48A. I can dim both Amps and Volts in this driver.

UPDATE Only "2 x Mean Well HLG-320H-48A" missing. Frame is already built, just need a few fixes and its good to go. Connected my first driver last night and it is awesome! Only one driver and it almost made me blind :D I'm still doing some tests, I will send more pictures with the wiring...

Hello! How many volts should I drive a MeanWell 320H-48A with 12x Samsung FB64B in parallel? 46? 46.5? 45.5? Thanks in advance!

Aluminium U profiles. I will post some pics as soon as the frame arrives :)

UPDATE A lot has changed since I started this thread. I made many changes and I guess now it's the time to send an update. Wagos, wire, thermal switch and more strips have arrived. Frame, screws, drivers and power cords are next. 36 x LM561C F Series Gen3 F564B Linear Strip 3000K 80CRI...

Hello! I'm looking for a power cord for my Mean Well HLG drivers. I'm from Europe so my plug should be something like this one: I found this one on mouser: http://mouser.com/ProductDetail/Qualtek/363012-D01/ Can anyone confirm if this is the right power cord? Thanks in advance!

Hey @robincnn , would this be a good thermal switch for 4xQB288 with HLG-480H-54A? HLG recommends a thermal switch while wiring in parallel but did not mention any. https://www.digikey.com/products/en?keywords=F20A07005ACFA06E Thanks in advance!

It's better to avoid voltage drop. Also the wires should be the same length. I'm following what Rider509 told me here: https://www.rollitup.org/t/samsung-f562b-linear-strip-build.952309/page-5#post-13881270

Any opinion?

If I use parallel wiring is this how I should wire them?

Either with 4 x MW185H-48A (32 strips, 54mA per diode) or 6 x MW120H-C500A (36 strips, 55mA per diode).

500mA it is too low. I was thinking between 700mA and 1050mA.

I would rather split the strips between multiple drivers.

I'm sorry. What I asked was how low can you drive a QB288? If you had money to run 16x QB288 in a 5x5, how low could you drive them in order to get decent PPFD? (+700)

Yeah, I didn't buy the driver yet because I'm still thinking which route I will choose, series or parallel.

And what about the QB288?

Can you run these boards with a CC driver at 700mA ou even 500mA for efficiency? Or it is to low to drive them?

I'm wiring in parallel. 8 strips per driver

My 32x F564B just arrived! :D Go check my build over here: https://www.rollitup.org/t/samsung-f564b-linear-strip-build.953509/